used MANURHIN CNC Long Turning Automatics

Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamps - coolant filtration

with rod pipe

MANURHIN KMX SWING 720 CNC lathe was built in 2004 in France. The automatic lathe is used for precision machining of workpieces with a maximum length of 2500 mm and a diameter of 20 mm, in ten axes. The high quality of the workmanship, high turning precision and reliability of the turning centre, will satisfy even the most demanding customers. The KMX SWING 720 swiss type lathe guarantees the possibility of performing a wide range of metal machining, thanks to the use of a main spindle together with a sub spindle rotating at a maximum speed of 10000 rpm. The machining tools are stored in a magazine with a capacity of up to 14 pieces and they are changed in a very short time. The lathe is equipped with a Fanuc Series 160i-T CNC controller for full control of the machine and a Hydrobar Express 226 LNS bar feeder. The total weight of the machine is 4300 kg. Technical parameters of  ...

turning diameter:33 mm turning length:330 mm control: 840 total power requirement:20 kW weight of the machine ca.:6 t dimensions of the machine ca.:3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours

Turret lathe make MANURHIN type Dekomat 50Mash. -No: 3005-157Spindle bore: 50 mmgr. rod cover: 42 mmgr. Diameter of the chuck: 160 mmGr. working diameter: 120 mmSpindle drive pol. Engine: 4/8 hpNumber of programmed speeds: 4Number of speed groups: 5Speed range: 75 - 3200 rpm.Number of turret positions: 8long stroke: 150 mmLarge planing stroke: 49.7 mmgr. Radius difference when copying: 17 mmNumber of longitudinal feeds per cycle: 3 (+ 4 *)Number of feedrates per cycle: 2 (+ 1 *)Feed range longitudinal: 0-425 mm / minFeed range flat: 0-150 mm / minRapid traverse: 7 mm / minExternal dimensions without bar feed: 2300 x 1200 x 1500 mmWeight: 2000 kgWith- separate control cabinet- Connector panel controlusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if yo ...

Description: serial number: 161 control: FANUC Series 18i-TB  , main spindle: bar passage diameter: 13 mm (16 mm) spindle bore: 17 mm motor power: 3.7 / 5.5 kW max. speed: 12000 rpm  , headstock: headstock stroke: 130 mm  , pick-up spindle: bar passage diameter: 13 mm (16 mm) spindle bore: 17 mm motor power: 2.2 / 3.7 kW max. speed: 12000 rpm max. clamping depth: 95 mm max. part length with workpiece pick-up: 130 mm  , tool carrier internal machining: number of slides: 1 travels: X-axis: 2 x 30 mm Y-axis: 135 mm number of tool positions: 2 x 4 cross-section of turning tools: 12 x 12 mm  , driven tools: number of tool positions: 3 tool holder: ER11 max. speed: 8000 rpm  , FMB minimag 18 bar feeder  , single ,dimensions: machine: 1600 x 1200 x 1900 mm bar feeder: 4900 x 600 x 1300 mm  , please als ...

Description: - Maximum bar capacity: 32 mm - Spindle bore: 37 mm - Maximum spindle speed: 8,000 rpm - Headstock stroke: 390 mm - Bar feeder: IEMCA TS 560/40 - Installation dimensions bar loader: 6300 x 2000 x 12000 mm - Type: For single-spindle lathes - Maximum bar diameter: 70 mm - Maximum bar length: 4000 mm weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 1,800 x 2,300 mm

Description: serial number: 154 control: FANUC Series 18i-TB  , main spindle: bar passage diameter: 13 mm (16 mm) spindle bore: 17 mm motor power: 3.7 / 5.5 kW max. speed: 12000 rpm  , headstock: headstock stroke: 130 mm  , pick-up spindle: bar passage diameter: 13 mm (16 mm) spindle bore: 17 mm motor power: 2.2 / 3.7 kW max. speed: 12000 rpm max. clamping depth: 95 mm max. part length with workpiece pick-up: 130 mm  , tool carrier internal machining: number of slides: 1 travels: X-axis: 2 x 30 mm Y-axis: 135 mm number of tool positions: 2 x 4 cross-section of turning tools: 12 x 12 mm  , driven tools: number of tool positions: 3 tool holder: ER11 max. speed: 8000 rpm  , FMB minimag 18 bar loader  , single ,dimensions: machine: 1600 x 1200 x 1900 mm bar feeder: 4900 x 600 x 1300 mm  , machine fun ...

Manurhin 65 ton x 2550 mm Capacity: 65 ton x 2550 mm Passage between uprights: 2050 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 255 mm Table width: 190 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 50 mm/sec Electric motor (power): 7,5 HP Weight: 5 ton

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg

MAX DIAMETER OF ROD: 100 MM MAX CUTTING DIAMETER: 552 MM MAX TURNING LENGTH: 1.195 MM TURRET: 16 ROTATION SPEED: 2800 RPM CONTROL: FANUC 32 B INCLUDES: AUTOBLOK STEADY SLU-3.1 – ZS CAPACITY: 20-165 MM AUTOMATIC FEEDER FOR BARS BREUNING – MOD. MUK 10016-II

Manufacturer: Maier Type: ML 36 D Year of construction: 2005 Control: GE Fanuc 3li TA Drive power: 16 kw Machining diameter: 36 mm Headstock stroke max.: 220-450 mm Speed: 0-8000 rpm. Number of tool stations: 4 Machine weight: approx. 5 t

VERSION 10 PNC axes - Control: FANUC PNC DECO - Rod passage 20 mm - movable headstock Z1 - Speed 10,000 1/min - 2x cross slide with 2x5 tool holders - 10 pre-adjustable tool holders - 4 front units - Counter spindle - Backside processing (4x end, 3x landscape) - Workpiece conveyor - Spaenefoerderer - Tool presetting device - Fire extinguishing system - Central lubrication unit - Oil mist extraction, filter mist - Drill quills, base holder and steel holder - various accessories (see photos) - Rod loading magazine Robobar

Control Fanuc PNC Deco Bar passage 26 mm (32 mm) Max. turning length (max. workpiece length in one clamp) 240 mm Spindle speed range of the main and counter spindle 0 - 8,000 rpm Max. drive power 7.5 kW Max. number of tools on the guide bush 10 Max. number of tools in combination attachment 4 Max. number of tools in counter operation 7 Max. number of axes: 10 (12/C-axis) Accessories: Chip conveyor, loading magazine FMB Robobar SSF-532

CNC Model: Fanuc - CNC Version: 31i - MODEL B - Main spindle power: 3,7Kw Main spindle bar clearance: 20mm - Headstock stroke (Z1): 205mm - Number of spindle revolutions: 10000 Number of linear axes: 6 Number of fixed tool spaces for tool plates: 13 Number of motorized tool plate spaces: 6 Rapid feeds linear axes X Y Z: 35m/min High cooling pressure: yes Pressure value: 20bar Counter-spindle: yes Number of counter-spindle revolutions: 10000 Power versus spindle: 3,7Kw Bar clearance: 20mm Fixed counter-spindle front tools: 2 Number of motorized rear tools: 8 Refrigerant used: emulsion Model and brand bar magazine: Iemca 332 E Chip evacuator: carpet Other technical data: Manually adjustable angular rostrum Machine equipment: Set of fixed and motorized tool holders :::D IMENSIONS AND WEIGHT::: Length: 2334mm Width: 1200mm Heigh ...

General: Built in 1999 Control Fanuc Series 16T Working spindle 500 – 10,000 rpm Turning diameter 20 mm Headstock stroke max. 205 mm Dimensions: 2,670 mm x 1,375 mm x 1,650 mm Weight 3,400 kg Further technical data: Express feed X, Y: 15,000 rpm Express feed A, B: 15,000 rpm Rapid feed Z1, Z2, E: 18,000 rpm Rapid feed C: 90,000 °/min Smallest input unit: 0.001 mm Smallest input unit C-axis: 0.001° Other equipment and accessories: Conveyor Bar feeder FMB turbo 3-26-3200

Hanwha STL 38 sliding head lathe :::SPECIFICATIONS::: CNC Model: Siemens - CNC Version: 840 D - Main Spindle Power: 11Kw - Main Spindle Bar Clearance: 38mm Headstock stroke (Z1): 320mm - Main spindle speed: 8000 - Number of linear axes: 8 - Number of fixed tool positions on the tool plate: 5 Number of driven tool holder plate tool slots: 4 Rapid feeds for linear axes X Y Z: 32m/min High refrigerant pressure: yes Number-of turrets-tool-slides: 1 number-of tools-first-turret-slide: 10 Number-motorized-first-turret-slide: 10 tool-holder-type-first-turret-slide: VDI 30 X-axis-stroke-first-turret-slide: 140mm Y-axis-stroke-first-turret-slide: + - 50mm Sub-spindle: yes Sub-spindle speed: 8000 Power against spindle: 11Kw Bar clearance: 38mm Counter spindle stroke Z : 320mm Number of fixed rear tools: 4 Refrigerant Used: Neat Oil Bar Feed ...

Sliding head lathe Tornos Sigma 20 :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 31i - Model A - Main Spindle Power: 5,5Kw - Main Spindle Bar Clearance: 20mm Headstock stroke (Z1): 230mm - Main spindle speed: 10000 - Number of linear axes: 6 - Number of fixed tool positions on tool plate: 6 Number of driven tool holder plate tool slots: 8 Rapid feeds for linear axes X Y Z: 30m/min High refrigerant pressure: yes Sub-spindle: yes Sub-spindle speed: 10000 Power against spindle: 5.5Kw Bar clearance: 20mm Number of fixed rear tools: 6 Number of motorized rear tools: 3 Refrigerant Used: Neat Oil Bar loader model and brand: Robobar SBF - 532 Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 2400mm Width: 1380mm Height: 2050mm Weight: 3000kg

Gildemeister GD 16-5 - Top condition!, - Synchronized Guide bush, - 3off life tools slide 1, - rear working, - swarf conveyeor, - oil mist filter, - bar loader Iemca Smart 316

Gebr. CNC longitudinal lathe Citizen L520-VII, YOC 2003 Control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Rod Ø max. 20 mm, Turning length max. 205 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front hand, rear machining), parts conveyor belt, Fire extinguishing system Conveyor Loading magazine IEMCA BOSS 432r The machine can be viewed by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

TSUGAMI BS12-III CNC Langdrehautomat TECHNISCHE DATEN Drehdurchmesser: 3-12 mm Drehlänge: 170 mm Max. Bohrungsdurchmesser: 7 mm Max. Innengewindedurchmesser: M6 Drehzahl: 12`000 U/Min Drehzahl, Gegenspindel: 6`000 U/Min Anzahl Achsen: 6 Abmessungen: ca. 190 x 130 x 220 mm Gewicht: 2200 kg Für die Richtigkeit, Vollständigkeit und Aktualität der Angaben wird keine Gewähr übernommen.

Tsguami BS18DE(S)-III CNC Drehautomat Anzahl Achsen: 6 Anzahl Spindeln: 2 Hauptspindel, Durchlass: 18 mm Verfahrweg: 210 mm Drehzahl: 10`000 U/Min C-Achse: 1° Gegenspindel: 18 mm Drehzahl: 8`000 U/Min Werkzeughalter: Siehe Foto Abmessungen: 195 x 125 x 220 cm Gewicht: ca. 2200 kg Für die Richtigkeit, Vollständigkeit und Aktualität der Angaben wird keine Gewähr übernommen.

Sliding head lathe Tornos Deco 26a :::BASIC INFORMATION::: SKU: 17C781 Machine Level: Standard Product name: Tornos Deco 26a sliding head lathe Category: Turning/Sliding head cnc lathes Brand: Tornos Model: Deco 26a Year of construction: 2012 Ad: 0 Final price: 30.000,00€ Availability: For sale :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 31i - model B5 Main spindle power: 7.5Kw Main spindle bar clearance: 26mm Headstock stroke (Z1): 240mm Main spindle speed: 8000 Number of linear axes: 10 Number of fixed tool holder plate positions: 6 Number of driven tool holder plate tool slots: 4 Number-of turrets-tool-slides: 1 Number-of tool-places-first-turret-slide: 4 Number-motorized-first-turret-slide: 4 Sub-spindle: yes Number of sub-spindle revolutions: 6000 Power against spindle: 3.7Kw Bar cleara ...

Sliding head lathe Star SR 38 Type A :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 31i model B Main spindle power: 11Kw Main spindle bar clearance: 38mm Headstock stroke (Z1): 320mm Main spindle speed: 7000 Number of linear axes: 7 Number of fixed tool holder plate positions: 14 Number of driven tool holder plate tool slots: 7 Rapid feeds for linear axes X Y Z: 36m/min High refrigerant pressure: yes External tank system with filter: yes Sub-spindle: yes Sub-spindle speed: 7000 Power against spindle: 5.5Kw Bar clearance: 38mm Number of motorized rear tools: 8 Coolant Used: Neat Oil Model and brand of bar loader: Iemca Boss 552-HD for 4 meter bars Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 2740mm Width: 1315mm Height: 2120mm Weight: 4300Kg

Number of linear axes 6 Number of C axes 2 Total 25 tool stations 8 driven tool stations Max. workpiece diameter 20 mm Max. workpiece length 180 mm Max. bar capacity diameter 20 mm Controller Fanuc 32i With FEDEK (LNS) GT326 Bar feeder