We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,247 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Load: 1.1t, battery weight: 1.065-1.175t, motor power: 5kW, weight: 4.14t, operational hours counter: 2580h.
used
Description: LOADING only at a lorry loading ramp from the rear onto a lorry! , Before loading, the buyer must dismantle the mast of the forklift, there is no assistance from the seller! STEERING BEARINGS / ,STEERING GEAR , DEFECTIVE Vehicle can only be used as a spare parts store! The forklift can be collected from week 23, if it is not collected by week 26, the client reserves the right to dispose of the forklift and to retain payments already made. loading capacity: 1,100 to, battery and charger available: yes, Approx. Onsite Dimension. (l x w x h): 1 x 1 x 3,500 mm, weight approx.: 4,300 kg, serial number: 04111762, charging voltage: 48
used
Description: LOADING only at a lorry loading ramp from the rear onto a lorry! , Before loading, the buyer must dismantle the mast of the forklift, there is no assistance from the seller! The forklift can be collected from week 23, if it is not collected by week 26, the client reserves the right to dispose of the forklift and to retain payments already made. loading capacity: 1,100 to, battery and charger available: yes, Approx. Onsite Dimension. (l x w x h): 1 x 1 x 3,500 mm, weight approx.: 4,220 kg, serial number: 12,034,283, charging voltage: 48V
used
ID2285 Clamp Rod Magazine/Rod Magazine Rod magazine for drilling rig, 3-shaft magazine Boom magazine for drilling rig, 3-bay magazine
used
Edge magazine IMA - 6x - 24x fold magazine - 550 or 800 mm coil diameter Several versions available from stock. Price on request.
used
sell used pallet magazine by Kettner, very good condition
Saeed empty pallet magazine with roller conveyor
used
Bar Loading Magazine/Tal AUTO 65-32 LxWxH approx. 5000x1000x1500mm Weight approx. 600 kg Control via CNC machine (was mounted on a Traub-CNC machine) B0doi8oziq Rods diameter approx. 5-65mm Pole length approx. 4 meters Height adjustment approx. 1000-1300mm Power supply 380 volts Max. feed travel approx. 4000mm Max. rod weight approx. 150 kg
used
Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz
used
Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill / drivers -Magine screwdriver: for self-tapping screws, sheet metal screws -Suitcase -Total weight: 10 kg
used
Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill / drivers -Magine screwdriver -280 W 0-1100 rpm -with suitcase -Number: 4 x screwdrivers available -Price: per piece -Dimensions: 515/285/H75 mm -Total weight: 6 kg/piece
used
Edge magazine for edge banders -Spaces for edges: 5 pieces -Max. Edge width: 60 mm -freestanding -Dimensions: 900/530/H1030 mm -Weight: 208 kg
used
Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile racks, support arm trolleys -Magazine trolley: for visible storage boxes, double-sided -Both sides: 54 small boxes / 24 large boxes -Swivel castors: 2x with parking brake -Dimension: 1100/500/H1685 mm -Weight: 85 kg
used
Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile racks, support arm trolleys -Magazine trolley: transport trolley with visible storage boxes -Transport trolley: 950 x 750 mm -Open storage boxes: 9 pieces 715 x 465 x H300 mm -Levy/Price: complete -Total dimensions: 950/750/H1610 mm -Weight: 67 kg
used
Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, support arm trolleys -Magazine trolley: for open-fronted storage bins, double-sided -Both sides: 90 boxes / total 180 boxes -Swivel castors: with parking brake -Dimensions: 1000/500/H1690 mm -Weight: 70 kg
used
Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, support arm trolleys -Magazine trolley: Transport trolley with open storage boxes, solid design -Transport trolley: 1425 x 640 mm -Storage compartments: 64 pieces, 32 pieces on both sides, some with open storage boxes -Base: 4 swivel castors -Total dimensions: 1425/640/H1460 mm -Weight: 225 kg
used
description: Vertical stroke of approx. 2000 mm incl. Vacuum pump and intermediate layer magazine for EURO and half pallets height: 3000 mm length: 1520 mm serial number: 2080467/017 width: 1120 mm Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for o ...
used
propulsion: SEW motors description: We are offering a complete empty pallet checking station incl. a GOOD pallet magazina and a BAD pallet magazine, incl. chain- and roller conveyors as well as incl. a protecting fence The placement can be adapted individually. Pallet inspector, pallet inspection machine. We do also have more conveyors on stock which we could offer you. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or ...
used
for Palletizers Suitable for the following formats: EURO pallet 1.200 x 800 mm Half pallet 600 x 800 mm
used
Equipped to handle the following pallets: - EURO pallet 1,200 x 800 mm - Industrial pallet 1,200 x 1,000 mm Very good condition.
used
Upon purchase, full maintenance of the machine is carried out
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 6 mm up to: 80 mm Length of bars min.: 130 mm Length of bars max.: 1500 mm Bar weight max.: 67 kg Loading time: 4 - 12 sec Feed range max.: 100 m/min Push force max.: 167 Nm Voltage 50 Hz 3x: 380 Volt Compressed air from: 5 bar Machine´s weight about: 600 kg Overall dimensions machine: Length: 2050 mm Width: 1800 mm Height: 1700 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 2 mm up to: 28 mm Length of bars max.: 4000 mm Execution: Barrel Oil feeded / flushed Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 400 kg Overall dimensions machine: Length: 4800 mm Width: 985 mm Height: 1500 mm
used
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 5 mm up to: 42 mm Length of bars max.: 3200 mm Outstanding length min.: 530 mm Feed range: 0 - 400 mm/s Max. Feed force: 550 N Voltage 50 Hz 3x: 400 Volt Power: 1.5 kW Compressed air from: 6 bar Overall dimensions machine: Length: 4700 mm Width: 915 mm Height: 1200 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 1 mm up to: 12.7 mm Length of bars max.: 3200 mm Outstanding length min.: 70 mm Execution: Barrel Voltage 50 Hz 3x: 440 Volt Overall dimensions machine: Length: 5000 mm Width: 400 mm Height: 1200 mm Various accessories:
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 3 mm up to: 32 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 3 mm up to: 36 mm Length of bars max.: 3200 mm Overall dimensions machine: Length: 4000 mm Width: 500 mm Height: 1500 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 2 mm up to: 12.7 mm Length of bars max.: 4000 mm Overall dimensions machine: Length: 4500 mm Width: 1160 mm Height: 1200 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up up to: 32 mm Length of bars max.: 3000 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 900 kg Overall dimensions machine: Length: 4000 mm Width: 800 mm Height: 1700 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 3 mm up to: 32 mm Length of bars max.: 3000 mm Overall dimensions machine: Length: 500 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 6 mm up to: 32 mm Execution: Barrel Oil feeded / flushed Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 400 kg
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 Technical data Bar diameter round up: 5 mm up to: 65 mm hexagon up: 5 mm up to: 56 mm Length of bars max.: 3750 mm Execution: Horizontal Voltage 50 Hz 3x: 200 Volt Power: 2 kW Machine´s weight about: 1450 kg Overall dimensions machine: Length: 5840 mm Width: 732 mm Height: 950-1100 mm
used
Technical data Bar diameter round up: 3 mm up to: 20 mm possible with equipement Length of bars max.: 3270 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 5270 mm Width: 1000 mm Height: 1300 mm
used
Technical data Bar diameter round up: 3 mm up to: 25 mm Length of bars max.: 3200 mm Voltage 50 Hz 3x: 400 Volt Overall dimensions machine: Length: 4000 mm Width: 600 mm Height: 1600 mm
used
Technical data Bar diameter round up: 6 mm up to: 45 mm Length of bars max.: 2000 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 2400 mm Width: 500 mm Height: 1500 mm
used
Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0 MACH-id 5059 MAKE FMB TYPE TURBO 5 - 42 YOP DIMENSIONS Length 6000 mm Width 1000 mm Height 1600 mm
used
used
Bar diameter: 25mm, max. bar length: 4200mm, with synchronous device, available in the end of 2023.
used
Number of pallets: 15, max. sheet format: 3000x1500mm, length: 9830mm, height: 6155mm, weight: 12t.
used
Formwork nail, formwork nails, concrete nails, head bolts -Manufacturer: Würth, shuttering nail in magazines box with 100 pcs. -Type: SMA 106/10 54mm long -Number: 61x box available -Price: per box -Dimensions cardboard: 120/100/H55 mm -Weight: 0.5 kg/box
used
Technical data for the shelving unit: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 2,630 mm Number of shelves per row of shelves: 02 pcs. á 1,290 mm Number of shelves plus floor level: 06 pcs. Currently in stock: approx. 15 shelf sets The scope of delivery includes: 03x Shelf stand, used Material colour: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm incl. transverse and diagonal struts Weight / piece: approx. 7.80 kg The stands are pre-assembled 1,700 mm high 610 mm deep 12x shelves, used Material colour: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / piece: approx. 4.78 kg max. load per floor at Evenly distributed load: 120 kg 06x Balance plates, new ...
used
Description: 5x upright 50x Carrier arms  , Please note! without contents Approx. Onsite Dimension. (l x w x h): 2,530 x 1,740 x 4,500 mm, weight approx.: 1,500 kg
used
We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts
used
Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location ...
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmVertical850 mmCross1050 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H12 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360 ...
used
GeneralUniversal machining centre; Control: 3D Control Siemens 840D powerline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring system ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...
used
Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 10,000 rpm motor spindle with 52/42 kW (40/100%DC) tool taper HSK-A100 DIN 69893 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Cross1100 mmLongitudinal2600 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight12 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // ...
used
GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal400 mmCross400 mmVertical375 mmTechnical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightWeight approx.6800 KgDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mSpindle speed 28.000 rpm HSK-A63Spindle speed 20 up to 28.000 U/min Motor spindle with shaft cooling power 30/20 kW // 40.23hp/ 26.82 hp (40/100% DC) torque 40/27 Nm (40/100% DC) tool clamping HSK 63 according to DIN69893 (different from standard)Chain-type tool magazine 60 po ...