used MAG PLASTIC PET Stretching blowing machines

year of manufacturing: 1996 with 10 bottles/row capacity: 1.600 - 3.600 bph gas directly heated (on request the gas burner can be changed for an oil burner against charge) incl. automatic label discharge stainless steel water baths completely reconditioned incl. new main chain and new bottle cells

Bottle washer, MAG, 10 bottles / row, with 80 mm plastic cells, built in 1991

Bottle washer, make MAG, type: Sirio 7, single-end machine, for 6.000-13.000 Fl/h, 10 bottles/row, with 80 mm bottle cells, built 1992

Glass bottle washer, MAG Schymanski Enomeco, year: 2000, complete stainless steel, Siemens S7, for 330 ml + 500 ml and 500 ml bottle with swing stopper clip lock, capacity up to 7,000 bph.

Key data: 630 , 630 , 710

- X: 630 mm - Y: 630 mm - Z: 710 mm - speed range: 12.000 rpm - tool changer: 40 -station - B axis: Ø 525 mm - 360 ° - coolant system: yes - chip conveyor: no - tool holder: HSK 63 - control: MTX (Bosch Rexroth) - total power: 30 kW - weight of machine: 11.000 kg - space requirement (W x D x H): 7,0 x 2,0 x 3,2 m - condition: very good Details High-speed machining center with horizontal main spindle, direct measuring systems in all axes, feed speeds X / Y / Z: 60 m / min., B: 60 1 / min, max.forces (X / Y / Z): 17.5 / 20 / 17.5 kN, main spindle (Weiss GmbH), hardly any operating hours, was only used for research purposes at a technical university

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: Sinumerik 840 D b-axis: 360 ° turning speeds: 16.000 U/min rapid traverse: 60 m/min tool taper: HSK 63 tool magazin:: 144 Plätze total power requirement: weight of the machine ca.: 17 t dimensions of the machine ca.: 7,4 x 3,35 x 3,7 m Pallet changing device: 180 ° NC rotary table Set-up station Full-space enclosure with workspace rinsing and manual rinsing gun Coolant system with IKZ Coolant pump 20-70 bar Coil suction filter 50mü Double chamber filter 60mü for internal coolant supply incl. prewarning Chip conveyor in scraper belt design Renishaw measuring system with probe Tool breakage control parallel to machining time (mech. probe) in tool magazine Incl. fixtures / clamping angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Component size: Max. diameter 150 mm, height 112 mm, min. diameter: 70 mm, height: 64.2 mm CNC Path Control Sinumerik 840 D For more technical data, see PDF Electrified viewing possible in Bielefeld

specifications: - maximum grinding length 360 mm - maximum grinding width 155 mm - maximum installation height 280 mm - Grinding wheel stroke approx. 240mm - Clamping area 400 x 160 mm - Magnetic clamping plate 300 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet loop fitting - Drive 400 V / 3 kW - Space required approx. W 850 x H 1700 x D 950 mm - Weight approx. 550 kg

product width 240-300mm product length 200-450mm film thickness 0.008-0.02mm two lanes production speed max 500 pcs per minute machines are almost unused

Manufacturer: Citus Kalix Model: KX 603 Year : 2011 Type: Automatic plastic tube filler Developed to fill all types of tubes available on the market: round, elliptical, etc. Hopper lifting truck ThermoChill I recirculating coolers Formats + associated parts available (details on demand) Documentation / full technical file General information : Capacity: max 60 units / min depending on product. Max product diameter : 50 mm Min product diameter : 10 mm Max product length: 230 mm Min product length: 50 mm Max fill volume: 400 ml Min fill volume: 1 ml

Plastics Recycling Extruder PP=900-1000kg Complete Line

Traysealer from the manufacturer MECA PLASTIC, model 1500. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Measures of the last of the tray to be sealed 165 mm x 265 mm x 70mm x 2 units, minutes for film reels of width 435mm. Total machine size 900 mm x 600 mm x 1560 mm high. The MECA PALSTIC tray seamer has been designed to package food products with a modified atmosphere, in industrial environments. Low investment, multiplicity of uses and flexibility explain the popularity of the mod.1500. With this you can close trays of different materials and sizes at high speed. Like all MECA PLASTIC packaging machines, it offers speed, reliability, quality and excellent performance, as well as easy maintenance. The mold can be changed in a few minutes and the machine is very easy to clean. For the results achieved and its  ...

Product Width 240-300 mm Product Length 200-450 mm Film thickness 0.008-0.02 mm Two lanes production Production max 500 pcs/min Year 2020 – COMPLETELY NEW !!!

Description Electric charge Working hours: 6.300

Description Electric charge Working hours: 6.300

Description Electrical charge

Description Double injection machine Robot Tecnomatic CNC Medium

Description SB Plastic three-phase power supply without container Blowing Power: 0.75 kw Voltage: 380V

Description SB Plastic three-phase power supply without container Blowing Power: 0.75 kw Voltage: 380V

Description SB Plastic three-phase power supply without container Blowing Power: 0.75 kw Voltage: 380V

Description SB Plastic three-phase power supply without container Blowing Power: 0.75 kw Voltage: 380V

Description MANY LANGUAGES AVAILABLE

Description MANY LANGUAGES AVAILABLE

Description MANY LANGUAGES AVAILABLE

Description MANY LANGUAGES AVAILABLE