british flag
Resale Logo

MULTI used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information   Meinex Import Export Handels GmbH  http://www.meinex.de 
banner logo
start page > keywords MULTI > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
122196473 401  

SLIM CAN FILLING LINE 30, Made by Kettner for sale
Can filling machines


Can Filling Line 30.000 cph for CSD: This complete can filling line was installed in 1994. It can operate 0.25, 0.33 and 0.5 ltr aluminium cans with type 202 lids. The line is in good condition and the operation stopped ...
used machine
 
Can Filling Line 30.000 cph for CSD:
This complete can filling line was installed in 1994. It can operate 0.25, 0.33 and 0.5 ltr aluminium cans with type 202 lids. The line is in good condition and the operation stopped in 2015. It is installed and powered and can be dry tested.
List of main equipment:
1-Depalletizer,Made by Kettner, 1994, PLC S7
2-Conveyors:60 m approx
3-Can Filler, Made by Ortmann & Herbst, Type:Hansacan DO 40-123, Year:1994, 30000 CPH for 0.25, Container sizes:0.25,0.33 and 0.5 ltr
4-Seamer:CFT, 2012 (totally refurbished by CFT),Filling process:Vacuum,Pitch:124 mm, Filling valves: 40, Capping heads:6,Cap type:Aluminum lid 202Can diameter:66.3 mm max,Can height:91.69 mm (0.25 ltr)
5-Filling inspector:HEUFT Spectrum TX, 2006
6-Foreign particle inspector:MIHO Newton Multi MX, 2013
7-Rinser, Made by Trans-Tech Hysek GmbH,Type:Cable Conveyor,Year:2004
8-Mixer-carbonator,Manufacturer:Berchi,Capacity:150 hl/h,Functions:water deaeration, carbonation, syrup dosage and mixing, CIP connect
9-Bottle conveyors:120 m approx, three accumulating tables,Pack conveyors:70 m,Pallet converyors:7-8 m
10-Shrink wrapper,Manufacturer:SMI,Control PLC:SMI COSMOS
11-Palletizer,Manufacturer:Kettner, Year:1994
12-Stretch wrapper: Tempo Pack

Condition:The line is in good condition and the operation stopped in 2015. It is installed and powered and can be dry tested.
1994
Price  
  PK   request
122168511 205

GANNER 010/1614 for sale
Multi spindle drilling machine


Motor: 1.1 kW / / 2,800 rpm, Pneumatic clamping, foot control, 9 spindles.

 
Motor: 1.1 kW / / 2,800 rpm, Pneumatic clamping, foot control, 9 spindles.
 
Price  
    request
122168179 107

AMADA EML Z 3510 NT for sale
Combination Machines


Make: Amada Type: EML Z 3510 NT Year of built: 07/2005 Laser power: 4000 Watts Process areas -Die-cutting operation: 3050 x 1620 mm -Laser operation: 2550 x 1270 mm Baqy0djnmn -combined: 2500 x 1250 mm -Z axis l ...
used machine
 
Make: Amada
Type: EML Z 3510 NT
Year of built: 07/2005
Laser power: 4000 Watts
Process areas
-Die-cutting operation: 3050 x 1620 mm
-Laser operation: 2550 x 1270 mm
Baqy0djnmn
-combined: 2500 x 1250 mm
-Z axis laser: 380 mm
Control: AMNC-F
Hours of operation: 68000 h
Punching power: 30 to
Maximum sheet thickness: 6 mm
Maximum punching diameter: 114.3 mm
Maximum workpiece weight: 220 kg
Z turret: 45 stations
Of rotation stations: 4
Length: 6500 mm
Width: 6000 mm
Height: 2520 mm
Weight approx.: 29000 kg

Features:
-45 stations of which 2B + 2C A/I
-Punch & forming
Threads / tapping (4 stations)
Air-blow
Corrugated sheet sensor
Part door 400 x 1525 mm
-Foerderband
-Transformer, radiator, extraction, Alpha-Pack, light barriers
New turbine in 2016 and maintenance check

Multi media CNC control:
-Model AMNC
-Storage: Hard disk
-Number of controlled axes: 7 (X, Y, YL, Z, T, C + RAM)
-Disk drive: 3.5 "HD, CD ROM
-Interface: RS 232 C, RJ45, USB

Automation
Loading system Amada L 300
-Discharge-sorting system PRUL 300 III
2005
Price  
    request
122168046 102

WEILER Commodor B for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


gebr. L + Z lathe make hamlet Model can B. No.: 2046 built 1988 Tip height 180 mm Top width 1000 mm Turning Ã? bed 380 mm over cross slide 190 mm Turning length covered l + Z spindle 900 mm Bed w ...
used machine
 
gebr. L + Z lathe make hamlet
Model can B. No.: 2046 built 1988

Tip height 180 mm
Top width 1000 mm
Turning Ã?
bed 380 mm
over cross slide 190 mm
Turning length covered l + Z spindle 900 mm
Bed width 305 mm
Spindle bore 56 mm
Tailstock Quill MK 4
18 spindle speeds 25-2000 RPM
200 feeds
longitudinal 0.022 - 0.8 mm / Rev
Plan 0.011 - 0.4 mm / Rev
Engine 2/4 kW
External dimensions:
Width 2300 mm
1100 mm deep
Height 1400 mm
Weight approx. 1500 kg
With: 4 - jaw Chuck Röhm Ã? 200 mm
3 - jaw Chuck Röhm Ã? 200 mm
Multifix carrier head Gr. B with inserts
Coolant system engine light
Mitlo. Lathe
Cover control and spindle
Chuck guard

The engine comes from a vocational training centre and is in very good condition.

1988
Price  
    request
122168040 102

WEILER Commodor B for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


gebr. L + Z lathe make hamlet Model can B. No.: 2461 built 1988 Tip height 180 mm Top width 1000 mm Rotating Ã? bed 380 mm over cross slide 190 mm Turning length covered l + Z spindle 900 mm Bed wi ...
used machine
 
gebr. L + Z lathe make hamlet
Model can B. No.: 2461 built 1988

Tip height 180 mm
Top width 1000 mm
Rotating Ã? bed 380 mm
over cross slide 190 mm
Turning length covered l + Z spindle 900 mm
Bed width 305 mm
Spindle bore 56 mm
Tailstock Quill MK 4
18 spindle speeds 25-2000 RPM
200 feeds along 0.022 - 0.8 mm / Rev
Plan 0.011 - 0.4 mm / Rev
Engine 2/4 kW
External dimensions:
Width 2300 mm
1100 mm deep
Height 1600 mm
Weight approx. 1500 kg
With:
3-axis digital display HEIDENHAIN
4 - jaw Chuck Röhm Ã? 200 mm
3 - jaw Chuck Röhm Ã? 200 mm
Multifix carrier head Gr. B with inserts
Coolant system engine light
Mitlo. Lathe
Cover control and spindle
Chuck guard

The engine comes from a vocational training centre and is in very good condition.

1988
Price  
    request
122129309 406

MULTIPACK F40 for sale
Banding machine


Stretch bander suitable for grouping and banding of folding boxes aso. Output: up to 30 packages/min.
used machine
 
Stretch bander suitable for grouping and banding of folding boxes aso. Output: up to 30 packages/min.
1995
Price  
    request
122127301 702

GARBIN 43 DX UMI / 83 LI for sale
Multideck ovens


Description Brand Garbin Model 43 DX UMI / 83 LI ID 7083 Status Active Price 560 € + VAT Year of manufacture 2006 Location Oradea, Romania - Capacity: 4 trays, 432?343mm - perfect for cooking a variety of  ...
used machine
 
Description

Brand Garbin
Model 43 DX UMI / 83 LI
ID 7083
Status Active
Price 560 € + VAT
Year of manufacture 2006
Location Oradea, Romania

- Capacity: 4 trays, 432?343mm
- perfect for cooking a variety of bakery products, semi-cooked food, as well as, fish, meat and vegetable products.
- Size: Length - 600mm, depth - 595 mm height - 560 mm.
- Full stainless steel casing, mechanical control system.

Details Fermenter: - 8 trays capacity - 220-230 V voltaje
- 1,5 Kw power consumption
- Size: Length: 600mm depth: 630 mm height 915 mm
- Weight: 38 kg

ExWorks Oradea, price is negotiable.

Contact

Tel.: +40-359/175.575
Fax: +40-259/426.248
Mobil: +40-743/177.040 ; +40-740/221.698

Technical inspection can be organized at least 24 hrs before the due date

We speak English. Wir sprechen Deutsch. (+40-740/221.698 )
Hablamos Español. Beszélünk magyarul. (+40-743/177.040 )

Irrtum, Anderungen und Zwischenverkauf vorbehalten /
Subject to errors, changes and prior sale /
Ne rezervam dreptul la greseli, modificari si vanzare prealabi
2006
560 €  
  RO   request
122125293 107

TRUMPF TC 600 L - 1600 - 2400 Watt for sale
Combination Machines


Make: Trump card Type: TC 600 L - 1600 Year of manufacture: 03/2001 Maximum working range X-Y: 3085 x 1740 mm Laser power: 2400 watts Control: Siemens Sinumerik 840 d Hours of operation: 75079/74702/19805 (30.08.20 ...
used machine
 
Make: Trump card
Type: TC 600 L - 1600
Year of manufacture: 03/2001
Maximum working range X-Y: 3085 x 1740 mm
Laser power: 2400 watts
Control: Siemens Sinumerik 840 d
Hours of operation: 75079/74702/19805 (30.08.2017)
Punching power: 22 to
Positioning range combines: 2585 x 1650 mm
Positioning range laser operation: 3085 x 1650 mm
Stanzbetgrieb travel range: 3085 x 1740 mm
Maximum sheet thickness: 8 mm
Maximum punching diameter: 76.2 mm
Maximum workpiece weight: 230 kg
Max speed: 90/60/108 m / min
Number of tool stations: 17
Number of clamps: 4
Length: 7500 mm
Width: 8700 mm
Height: 2400 mm
: Weight 22500

Standard equipment
-Sturdy C frame
-Coordinate guide with integrated linear magazine
-Drives: Maintenance-free three-phase servomotors
-HI-LAS high pressure cutting
-Laser cutting head with 5 "lens
-Laser cutting head with 7.5 "lens
-Capacitive treble slides III
-Programmable cutting gas selection/pressure adjustment
-Slag cone detection
-Programmable power cycles
-ContourLas
-Logbook function laser
-Compact dust collection
-Rotating tool holder
-Automatic designation system with retainer
-Automatic tool changer with 18 stations
-3 clamps
-2 automatic part slides for parts of each 500 x 500 mm
-Sensor for both part slides
-2 parts crates
-Tool spray lubrication
-2 lubricant containers
-Punching slug extraction
-Chip bucket
-Emergency shut-down hydraulic
-Tank heater
-External control console
-3 drawers and shelf on the control panel
-Automatic switch-off
-Safety light barrier
-3.5 "floppy disk drive
-BNC and RJ45 network connector

Advanced facilities
-Laser TLF 2400 turbo
Multi tool control
-Function thread forming
-Function sign
-Soft punch
-Designation cylinder
-Vibration-damped installation
-Blow gun
-Bulge detection

Automation
-Preparation for retrofit automation

2001
Price  
    request
122125291 107

TRUMPF TruMatic 6000 L - 1600 FMC for sale
Laser Cutting Presses


Make: Trump card Type: TruMatic 6000 L - 1600 FMC Year of built: 07/2007 Maximum working range X-Y: 3085 x 1740 mm Laser power: 3200 Watts Control: Siemens Sinumerik 840 d Hours of operation: 52328/52410/10903 (06/ ...
used machine
 
Make: Trump card
Type: TruMatic 6000 L - 1600 FMC
Year of built: 07/2007
Maximum working range X-Y: 3085 x 1740 mm
Laser power: 3200 Watts
Control: Siemens Sinumerik 840 d
Hours of operation: 52328/52410/10903 (06/2017)
Punching power: 22 to
Positioning range combines: 2585 x 1650 mm
Positioning range laser operation: 3085 x 1650 mm
Positioning range punch operation: 3085 x 1740 mm
Maximum sheet thickness: 8 mm
Maximum punching diameter: 76.2 mm
Maximum workpiece weight: 230 kg
Max speed: 90/60/108 m / min
Number of tool stations: 17
Number of clamps: 4
Length: 7900 mm
Width: 9100 mm
Height: 2400 mm
Weight: 23500 kg

Standard equipment - sturdy C frame
-Coordinate guide with integrated linear magazine
-21 places for tools and clamps
-3 clamps
-Drives: Maintenance-free three-phase servomotors
-Programmable presser to the repositioning with adjustable down holder force
-Sensor-controlled part slides 500 x 500 mm for punching and laser station, expression cylinder on laser slide
-2 good slide
-Laseraggreagat: Hochfrequenzangeregter CO2 laser TruFlow 2000,
vibration-isolated, integrated in machine frame, including
Cooling unit and laser control TASC 3
-NitroLine high pressure cutting
-Fast processing with SprintLine
-ContourLine for making small holes
-Cutting gas pressure setting can be programmed
-Laser cutting head: 5 "-lens, quick change facility, distance control ControlLine"
-Solar
-Additional cutting head with 7.5 "lens
-Punching head: hydraulic Mono tool holder, 360 ° rotation for all tools, automatic tool length compensation,
Tool spray lubrication, 2. lubricant containers, lifting and
Thread counter, punching slug extraction, chip buckets
-Control: Sinumerik 840 d, TFT colour monitor 10,4 ", simple
Operation, online help, Diagnostics, maintenance logbook, technology data order tables, Teleservice, 3.5 "-floppy drive"
RJ45 network connector
-Security: Mehrstrahlige photocells, emergency shut-down linkage,
Extraction and compact dust Extractor, protection against scattered radiation
on the cutting head

Advanced facilities
-TruFlow 3200 includes cutting head with 9 "lens for stainless steel
-FocusLine
-Function MultoTool
-Function MultiBend
-Function thread forming
Signing / fast beading
-Function role technology
-Function soft punch
-Adaptive stroke calibration
-StripLine
-1 additional clamping claw
-Designation cylinder
-Vibration-damped installation
-Automatic switch-off
-Chip conveyor with tilt tray
-Blowing device hardware
-Bulge detection
-Ethernet switch
-PDC interface
-Preparation of SortMaster box
-Preparation of SortMaster pallet

Automation

SheetMaster 1606

Standard equipment
-Loading station with cow magnets
-Unloading loading platform
-Plate thickness gauge for double sheet control
-Cleaner plate module
-Control TASC 100
-Manarmpaket

Advanced facilities
-Magnet system
-Connection for additional cleaner (12 units)
-Discharge load monitoring

GripMaster (3000 x 1500 mm) standard
-Scissor lift table 300 mm
-Residual grids pliers with sensors
-Rest grille range tipping 3000 x 1500 mm

-Storage interface
-Safety device for storage connection incl. 2. photoelectric sensor family

2007
Price  
    request
122125289 107

TRUMPF TC 5000 R - 1600 FMC for sale
CNC Punching Nibbling Machines


Make: Trump card Type: TC 5000 R - 1600 FMC Year of construction: 2003 Working range x-Y: 3000 x 1650 mm Punching power: 22 to Control: Siemens Sinumerik 840 d Hours of operation: 66663 (09/2017) Maximum sheet thi ...
used machine
 
Make: Trump card
Type: TC 5000 R - 1600 FMC
Year of construction: 2003
Working range x-Y: 3000 x 1650 mm
Punching power: 22 to
Control: Siemens Sinumerik 840 d
Hours of operation: 66663 (09/2017)
Maximum sheet thickness: 8 mm
Maximum punching diameter: 76.2 mm
Maximum speed: 100/60/116 m / min
Maximum workpiece weight: 230 kg
Number of tool stations: 21
Number of clamps: 4
Length: 7600 mm
Width: 7000 mm
Height: 2500 mm
: Weight 17300

Standard equipment
-Sturdy C frame
-Rotating tool holder
-Automatic designation system with retainer
-Automatic tool changer with 21 stations and 4 clamps
-Programmable parts slide parts 500 x 500 mm
-Programmable holders with a down holder force
-Good part of container
-Tool spray lubrication
-2 lubricant containers
-Punching slug extraction
-Chip bucket
-Emergency shut-down hydraulic
-Order table
-TFT color display 10.4 "
-3.5 "floppy disk drive
-Graphics programming ToPs 2000
-RJ45 network connector
-Safety photocell - bulge detection
CE mark

Advanced facilities
Multi tool control
-Function thread forming
Signing / fast beading
-SoftPunch
-Multishear
-Individually-to-open clamps (4 PCs.)
-Designation cylinder
-Sensor for slide of part of
-Vibration-damped installation
-Chip conveyor with tank
-Automatic switch-off
-Storage interface
-Additional support tables for machining of panels 4000 x 1650 mm
-21 RTC cartridges with die plates

Brush table design
-Brush tables with loading and unloading loading help

Automation

SheetMaster 1605 plus 4000 x 1650 mm
-In-depth guide frame (C frame)
-Extension of the Guide track
-Stop system with cow magnets for loading station
-Magnet system
-Module cleaner plate with Vakuumsensorik - sheet thickness gauge for double sheet control
-Control TASC 100
-Main time parallel loading and unloading SheetMaster

TRUMAGRIP plus 4000 x 1650 mm
-Rest grille range tipping - scissor lift table 400 mm
-Residual grids pliers with sensors

Double car 4000 x 1650 mm
-Loading and unloading double Waggons
2003
Price  
    request
122125285 107

TRUMPF L 6030 - 4000 Watt for sale
CNC Laser Cutting Machines


Make: Trump card Type: L 6030 Year of construction: 2001 Working range x-Y-Z: 6000 x 2000 x 115 mm Laser power: 4000 Watts Control: Siemens Sinumerik 840 D Hours of operation: 41500/26000 Maximum sheet thickness:  ...
used machine
 
Make: Trump card
Type: L 6030
Year of construction: 2001
Working range x-Y-Z: 6000 x 2000 x 115 mm
Laser power: 4000 Watts
Control: Siemens Sinumerik 840 D
Hours of operation: 41500/26000
Maximum sheet thickness: 20/15/10 mm
Maximum workpiece weight: 1900 kg
Max speed: 60/85 m / min
Length: 16100 mm
Width: 5200 mm
Height: 2000 mm
Weight: 21500 kg

Standard equipment
-Laser TLF 2000
-Hi-LAS high pressure cutting
-Cutting head quick change facility
-Laser cutting head with 5 "lens
-Laser cutting head with 7.5 "lens
-Automatic sheet metal outer edge detection
-Capacitive treble slides III
-Position laser diode
-Programmable cutting gas selection/pressure adjustment
-Programmable power cycles
-Microweld
-Plasmasensorik PMS
-SprintLas
-ContourLas
-AutoLas plus
-Oil spray safe thick sheet metal working
-Logbook function laser
-Automatic pallet changer
-Lighting of workroom
-Conveyor for small parts/waste
-Multi Chamber extraction
-Compact dust collector
-Automatic switch-off
-Safety equipment
-Lite ToPs 100
-BNC and RJ45 network connector

Advanced facilities
-TLF 4000 Watt incl. HI-LAS plus

Automation
-Preparation of Liftmaster
2001
Price  
    request
122125283 107

TRUMPF TruLaser 3530 for sale
CNC Laser Cutting Machines


Make: Trump card Type: TruLaser 3530 Year of manufacture: 2007 Working range x-Y-Z: 3000 x 1500 x 115 mm Laser power: 3200 Watts Hours of operation: 76000/27000 Maximum sheet thickness: 20/12/8 mm Maximum workpiec ...
used machine
 
Make: Trump card
Type: TruLaser 3530
Year of manufacture: 2007
Working range x-Y-Z: 3000 x 1500 x 115 mm
Laser power: 3200 Watts
Hours of operation: 76000/27000
Maximum sheet thickness: 20/12/8 mm
Maximum workpiece weight: 710 kg
Max speed: 60/85 mm
Length: 9300 mm
Width: 4600 mm
Height: 2000 mm
Weight: 11500 kg

Standard equipment
-Laser TruFlow 3200
-Additional dynamic XP axis
-NitroLine
-Laser cutting head with 5 "lens
-Laser cutting head with 7.5 "lens
-Solar
-Cutting head quick change facility
-Automatic sheet metal outer edge detection
-ControlLine
-Position laser diode
-Programmable cutting gas selection/pressure adjustment
-Programmable power cycles
-Compressed air cutting
-PierceLine
-Microweld
-PlasmaLine
-SprintLine
-Machine up to 43 ° C ambient temperature
-ContourLine
-FocusLine
-Laser power control
-Spraying device
-Logbook function laser
-Automatic pallet changer
-Lighting of workroom
-Conveyor for small parts/waste
-Multi Chamber extraction
-Compact dust collector
-TFT color display
-Automatic switch-off
-Safety equipment
-Shop floor programming
-RJ45 network connector

Automation
-Preparation of LoadMaster
2007
Price  
    request
122125281 107

TRUMPF TruLaser 5030 - 6000 Watt for sale
CNC Laser Cutting Machines


Make: Trump card Type: TruLaser 5030 Year of manufacture: 03/2007 Working range x-Y-Z: 3000 x 1500 x 100 mm Laser power: 6000 Watts Control: Siemens Sinumerik 840 d Hours of operation: 35145/15890 (04/2017) Maximu ...
used machine
 
Make: Trump card
Type: TruLaser 5030
Year of manufacture: 03/2007
Working range x-Y-Z: 3000 x 1500 x 100 mm
Laser power: 6000 Watts
Control: Siemens Sinumerik 840 d
Hours of operation: 35145/15890 (04/2017)
Maximum sheet thickness: 25/25/15 mm
Maximum workpiece weight: 900 kg
Maximum speed: 200/300 m / min
Length: 11100 mm
Width: 4600 mm
Height: 2400 mm
Weight: 12000 kg

Standard equipment
-Closed machine frame with integrated laser unit
-Laser unit: CO2 laser TruFlow 6000 high frequency angeregt.
maintenance-free Turbo centrifugal blower, cooling unit, logbook function
-Automatic pallet changer
-Longitudinal conveyor for small parts/waste
-Drives: Gantry drive in combination with direct linear drives
-Universal die head quick change facility UTI with fieldbus connection
-Laser cutting head with a 250 mm lens
-Cutting gas pressure setting can be programmed
-ControlLine capacitive height control and process control
-Automatic focus position adjustment FocusLine
-Laser power control
-Position laser diode
-FastLine
-NitroLine high pressure cutting
-Fast processing with SprintLine in all thicknesses
-ContourLine for making small holes
-PlasmaLine
-Automatic sheet metal outer edge detection
-PierceLine
-Programmable power cycles
-Microweld
-Automatic nozzle cleaning
-Spraying device for secure thick sheet metal
-Automatic switch-off
-Lighting of workroom
-Control Siemens Sinumerik 840 d: Open control PC-based,
easy to use, online help, integrated e-shop, Diagnostics,
Maintenance logbook, technology data, tele-service
-Shop floor programming
-Security: Mehrstrahlige photoelectric beam guide full
encapsulated and monitoring system, multi Chamber extraction and compact dust collector, cab ventilated with nitrogen,
-RJ45 network connector
-USB
-TFT color display

Advanced facilities
-Compressed air cutting
-Laser cutting head with 115 mm lens
-Nozzle changer

Installation Variant
-Pedestal installation (without steel construction)
2007
Price  
    request
122125279 107

TRUMPF L 3050 -5000 Watt for sale
CNC Laser Cutting Machines


Make: Trump card Type: L 3050 Year of construction: 2002 Working range x-Y-Z: 3000 x 1500 x 100 mm Laser power: 5000 Watt Control: Siemens Sinumerik 840 d Hours of operation: 57199/28287/11241 (06/2017) Maximum sh ...
used machine
 
Make: Trump card
Type: L 3050
Year of construction: 2002
Working range x-Y-Z: 3000 x 1500 x 100 mm
Laser power: 5000 Watt
Control: Siemens Sinumerik 840 d
Hours of operation: 57199/28287/11241 (06/2017)
Maximum sheet thickness: 25/20/12 mm
Maximum workpiece weight: 900 kg
Maximum speed: 200/300 m / min
Length: 11100 mm
Width: 4600 mm
Height: 2400 mm
Weight: 12000 kg

Standard equipment
-Closed machine frame with integrated laser unit
-Laser unit: CO2 laser TLF 5000 (new in 2008), high frequency angeregt, cooling unit, logbook function
-Automatic pallet changer
-Longitudinal conveyor for small parts/waste
-Laser power control
-HI-LAS high pressure cutting
-Hi-LAS plus high-speed laser cutting
-PMS Plasmasensorik
-Fast processing with SprintLas
-ContourLas for making small holes
-Programmable cutting gas selection/pressure adjustment programmable power cycles
-Microweld
-Laser cutting head with 5 "lens - laser cutting head with 7.5" lens
-Cutting head quick change facility
-Automatic sheet metal outer edge detection
-Capacitive treble slides III
-Automatic focus position adjustment of AutoLas plus
-Position laser diode
-Logbook function laser
-Spraying device for secure thick sheet metal
-Automatic switch-off
-Lighting of workroom
-Control Sinumerik 840 d: Open control on PC-based, easy to use, online help,
Diagnostics, maintenance logbook, technology data, tele-service
-Shop floor programming lite ToPs 100
-Security: Mehrstrahlige photoelectric beam guidance is fully encapsulated and monitoring system, multi Chamber extraction and compact dust collector, cab ventilated with nitrogen,
-RJ45 network connector
-3.5 "floppy disk drive

Advanced facilities
-Clamps (2 pieces)
-Laser cutting head with 3.75 "lens
-Laser cutting head with 9 "lens
2002
Price  
    request
122124980 702

WINKLER Columbus C516-96 Variomat for sale
Multideck ovens


Used deck baking oven Winkler Columbus C516 96 Variomat 10qm baking surface Sale either from the site or including delivery and Assembly

 
Used deck baking oven Winkler Columbus C516 96 Variomat
10qm baking surface

Sale either from the site or including delivery and Assembly
 
Price  
    request
122124945 105

MEBA Eco 335 DGA for sale


Type: Eco 335 DGA Machine no. 6723 Year of construction: 2002 Design: CNC twin pillars band saw machine with automatic adjustment of miter CNC control: Siemens PC 670 Cutting area 90°: Round d 335mm / flat 500 ...
used machine
 
Type: Eco 335 DGA
Machine no. 6723
Year of construction: 2002
Design: CNC twin pillars band saw machine with automatic adjustment of miter
CNC control: Siemens PC 670

Cutting area
90°: Round d 335mm / flat 500x335mm
Miter right 45° round D. 330mm / flat 320x335mm
Miter right 30° round D. 180mm / flat 170x335mm
Miter left 45° round D. 305mm / flat 305x335mm

Bundle voltage clamping range: 0-300 mm / height 5-300 mm
Feed rate: Easy up to 600 mm / multiple 0-9999 mm
The remaining piece length: Manual 70 mm / 300 mm
Cutting speed: 15-150 m / min by means of frequency converter
Cut printing: infinitely variable hydraulic
Speed: 0 - 300 mm/min - infinitely variable
Band saw blade dimensions: 4400 x 34 x 1.1 mm

Saw band tension: using a torque wrench
Machine weight: 2000kg
Machine dimension: Lxwxh 2680x2350x1900mm
Working height: 750 mm with mounting elements about 800 mm

Accessories:
Minimal lubrication system
6m feed roller
-2-part 1 x 4m and 1 m x 2m / width 600 mm, diameter 90 mm / 11 wheels
-3 x vertical roller D. 65 mm height 340 mm - 6 x material supports, that on the feed roller conveyor are screwed
5m measuring base
-Length 5 m with Handwheel and digital display
-Roll width 600 mm / d 90 mm / 12 rolls
2002
Price  
    request
122037702 201

PLATON Multimatic 500 for sale


â?¢ Multiple crosscut saw â?¢ Brand: Plato â?¢ Type: Multimatic 500 â?¢ Year of manufacture 1995 â?¢ Saw heads 3 PCs. â?¢ Arbeitslg. 3,500 mm
used machine
 
â?¢ Multiple crosscut saw
â?¢ Brand: Plato
â?¢ Type: Multimatic 500
â?¢ Year of manufacture 1995
â?¢ Saw heads 3 PCs.
â?¢ Arbeitslg. 3,500 mm
1995
Price  
    request
122020842 409

MULTIVAC tray sealing machine for sale
Tray sealing machines


multivac tray sealer Several moulds Multivac tray sealer. mould 1 : 302x154mm. x2 in one frame mould 2 : 180x129mm. x4 in one frame mould 3 : 155x115mm. x6 in one frame mould 4 : 210x162mm. x3 in one fra ...
used machine
 
multivac tray sealer

Several moulds
Multivac tray sealer.


mould 1 : 302x154mm. x2 in one frame
mould 2 : 180x129mm. x4 in one frame
mould 3 : 155x115mm. x6 in one frame
mould 4 : 210x162mm. x3 in one frame
mould 5 : 210x162mm. x3 in one frame
mould 6 : 302x143mm. x1 in one frame
mould 7 : 155x112mm. x6 in one frame
mould DELÅ.
 
Price  
  NL   request
122020614 702

MIWE IDEAL 12qm for sale
Multideck ovens


Used deck baking oven Miwe ideal 12qm baking surface 6 herd per B 120 X 160cm 1 pull-out oven Unit gas fired Available from March 2018
used machine
 
Used deck baking oven Miwe ideal
12qm baking surface
6 herd per B 120 X 160cm
1 pull-out oven
Unit
gas fired

Available from March 2018
2008
Price  
    request
122020436 102

SCHÜTTE SF 51 bar guide for sale
Multi-spindle turn automatics


bar guide for a multispindle lathe Schütte SF51 incl. stock stand and sheets
used machine
 
bar guide for a multispindle lathe Schütte SF51 incl. stock stand and sheets
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country