milling machine used for sale

Cast milling machine table Length 1435 mm Width 420 mm Thickness 170 mm T-slots numbers 5 T slots Weight approx. 800 kg

Travel X-axis 1100 mm Travel Z-axis 360 mm Travel Y-axis 400 mm Table length: 1600 mm Table width: 360 mm Spindle taper: ISO 50 Main axle speed range: 32 – 1250 rpm. With vertical and chisel head accessories Year of manufacture: 1990 Cooling water system works. High-speed clutch burned out, to be renewed. Advance functions can be controlled manually.

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

SCM Swivel spindle milling machine - T110 i Product name: Swivel spindle milling machine Type: T110 i Manafacture: SCM Machine number: 071215 Year of construction: 1996 Condition: used, overhauled Technical details: - Table dimensions: 1,000 x 650 mm - Table height: 920 mm - Useful length of the milling spindle: 150 mm - Adjustment range of the milling spindle: 150 - 20 mm - Spindle diameter: 30 mm - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm - Number of rings of the table insert: 5 pieces - Diameter suction nozzle: 120 mm, 2 pieces - Foldable Aigner integral stop - FRIED chip trapping and milling protection device - VARIOFEED feeder, 3 wheels - 2 x table extension, each 1,100 mm - Weight: 430 kg - Swivel range of the milling spindle: -5° to 45° Engine data milling machine: - Power: 4 kW - Voltage: 380 V - Current: 9 A - Frequency: 50 Hz ...

Univ. Tool milling machine, milling machine MAHO type MH 400 P Masch. No. 41364 Year of construction 1981 Control Heidenhain TNC 125 (Active Digital) Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel paths with hand wheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle holder ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm infinitely variable feed X and Z-axis 5 - 1000 mm /min. infinitely variable Feed Y-axis 5 - 670 mm/min. infinitely variable rapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Pinol shift Vertical 50 mm Spindle drive 2.2 kW Mains connection 380 Volt, 50 Hz - conventional handwheels for X, Y, Z - el. Control cabinet fixed to the machine- Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg good condition; used

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Complete CNC bed milling machine (2x 2.5°) 22/29 kW on spindle Longitudinal X-axis 3600 mm Moving Y Axis 1000mm moving Z-axis1600 mm Dimensions clamping table 4100 x 900 mm Insertion into milling head (ISO)BT 50 Max speed control; 2250 rpm Control Heidenhain TNC 426 Length 6120 mm Depth 5050 mm Height3150 mm Weight 19 tons 30-position automatic tool changer Cooling through the spindle Note: without machine clamps visible in the photos, these have lot numbers 167 to 172 in this auction 3 trucks needed for transport (estimated) Dismantling + loading cost by professional dismantling team: 9000 euros

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Moulding machine / milling machine Olma for profiles 2 spindle 30 + 45 mm High-speed locking The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weld edge former INDUMASCH SIEGEN Type V 12 Masch. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45 Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 volts, 50 Hz - Flow / return - Built-in guide roller for bevel angle 45 - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm Weight 75 kg good condition; used

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

SHW UFZ 6 Rigid Stand Travel • X-axis (bed): 3,000 mm • Y-axis (vertical): 1,600 mm • Z-axis (headstock): 1,500 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: rapid traverse = 8,000 mm/min Universal milling head in orthogonal design • Swivel range milling head mount: 340 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 25 – 2,240 rpm Overhaul in 2010 • Year of construction 1992 Conveyor • Feed length: 3,000 mm Automatic tool changer • Magazine for 45 tools About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include, among other things, spare parts deliveries, on-site customer service, machine overhauls and control system m ...

Travel • X-axis (bed): 16,000 mm • Y-axis (vertical): 2,100 mm o Option Y = 3,100 mm • Z-axis (headstock): 1,200 (1,500) mm Control • CNC control: Siemens Sinumerik 840 C o Option control conversion Heidenhain iTNC 530 o Option control conversion Heidenhain TNC 640 o Option control conversion Siemens Sinumerik 840 SL Feed rate • X, Y and Z axes infinitely variable from: 2 – 12,000 mm/min Universal milling head in orthogonal design • Swivel range milling head mount: 340 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 22 – 3,200 rpm Year of construction: 1998 • 2013 – Headstock overhaul • 2017 – Overhaul of milling head • 2022 – Partial overhaul Clip • T-slots: 28 H7 • T-slot spacing: 250 mm, • Clamping area: 8,500 mm x 1,500 mm Chip conveyors (2 pieces) � ...

SHW Powerspeed 5 Travel • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axis: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Swivel range milling head mount: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Conveyor • Feed length: 10,000 mm Coolant device • Container capacity: 1,200 litres About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include, among other things, spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Performances: -Mach ...

Bed milling machine Manufacturer: SHW Werkzeugmaschinen Type: UF 5 Travel • X-axis: 2,500 mm • Y-axis (headstock vertical): 1,300 mm • Z-axis (headstock horizontal): 750 mm Control • CNC control: Heidenhain TNC 155 B Automatic swivel head (Switch between horizontal and vertical editing) Quill 120mm Milling spindle holder SK 50 Speed 2,500 rpm Mill table • Clamping area: 1500 x 800 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include, among other things, spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Performances: -Machines Ilbgjd8lvl -Spares -Customer service - Machine service - Machine overhauls - Control modernization _____ Second-hand machin ...

Key data: 1000 mm, 700 mm, 725 mm

Travel • X-axis (bed): 1,000 mm • Y-axis (horizontal): 700 mm • Z-axis (vertical): 7250 mm Control • CNC control: Heidenhain iTNC 530 Automatic swivel head • Quill 120 mm • Tool holder: SK 50 DIN 69871 & DIN 2080 • Speed range: 2,500 rpm General overhaul 2016 • 2016 – General overhaul incl. new control system • 2022 – Inspection and repair • Inspection of all components - > replacement if necessary • Geometric acceptance is carried out according to the new machine acceptance protocol Infinitely variable NC rotary table • Clamping area: 1,100 mm x 840 mm Used machine – Used milling machine – Used universal milling machine – Swivel head – Metalworking – Tool milling machine – Milling head – SHW machine – Bracket milling machine – Rotary table – NC rotary table – SK50 – SHW spare parts – Milling machine used  ...

WALDRICH COBURG 17S-10 FP 300 NC gantry milling machine built in 1989 in Germany is used for machining oversized workpieces, as well as many smaller workpieces at the same time. The machine equipped with a stable work table and indestructible components, allows for performing tasks such as milling, drilling and threading with the utmost precision, guaranteeing maximum process optimisation in a wide range of industries. Workpieces with a maximum weight of 60 tonnes are machined in five axes (X,Y,Z,W,C) using tools taken from a chain magazine located on the left side of the machine. This process is fully automated thanks to the special systems in the magazine responsible for automatic tool change and clamping. The WALDRICH COBURG CNC gantry milling machine is also equipped with a reliable spindle, additional angle milling heads (2 rotary heads, 1 Fork type head) and an intuitive SIEMENS ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis). The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg. Technical parameters of the ANAYAK PERFORMER 2000 machining centre - work table area (L x W): 2200 ...

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

TECHNICAL DATA SHEET CNC – Travelling column milling machine Make PARPAS Type SHARK One Control HEIDENHAIN iTNC 530 HSCI Year of construction 2016 Travel Longitudinal movement (X-axis) 3,500 mm Transverse movement (Y-axis) 1,083 mm Vertical movement (Z-axis) 1,074 mm Clamping table Clamping surface 4,000 x 1,000 mm Threaded holes with fitting seat Feeds X-, Y- and Z-axis, infinitely variable 2 - 30,000 mm/min. Rapid traverses in X / Y / Z 30 m/min feed force of the axes 10,000 N 2-axis milling head 2-axis milling head TUB-E92 with drive viaTorque motors for 5-axis simultaneous machining Power at 100 % ED 29 kW Speed range, infinitely variable 0-18,000 min-1 torque 92 Nm Rotational speed axis A/C 60 min-1 Tool holder HSK 63A – DIN 69893 Clamping force A-, C-axis 2,300/4,000 Nm Automatic tool changer ATC Tool stations 30 places  ...

PROMA FVV-135PD universal milling machine was built in 2018 in the Czech Republic. The highly reliable machine with a rigid construction is designed for precise machining of workpieces both vertically and horizontally, thanks to the vertical and horizontal spindle with an ISO 40 taper. The milling process is performed in the X,Y,Z axes on a fully illuminated working area with dimensions (L x W) of 1320 x 320 mm. The milling machine is additionally equipped with, among others, a SINO digital readout and cooling. The total weight of the machine is 2100 kg. Technical data of the PROMA FVV-135PD milling machine - work table size (L x W): 1320 x 320 mm - axis work feed: X,Y,Z - feed of table in X/Y axis: 1000/300 mm - rotation angle of rotary head: 360° - maximum vertical milling diameter: 25 mm - maximum horizontal milling diameter: 125 mm - maximum milling head diameter: 125 mm  ...

Swivel spindle milling machine Brand: Panhans type: 245/200 New machine Solid 880 kg machine with smart control system - Infinitely variable speed regulation 1500 - 10,000 rpm, - 7.5 kW motor with 11 kW frequency converter - Pushbutton with electronic soft start 7 touch control, optional use, top and bottom - Cutter zero point selectable in program, 3 reference points - Simple operating menu through innovative touch control (max. 2 levels) - Operating hours counter - Warning messages in case of operating errors - Remote maintenance via Internet (VPN tunnel) - USB interface for data backup and import of tools, programs and users - Tool database for 5 tools (20 programs are possible per tool) - 2-axis positioning control for height and swivel adjustment - Electronic position and speed displays Double-sided swiveling, fixed milling spindle for the swiveling range  ...

Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -Clamping table: 490 x 400 mm -Travel path: X/Y/Z 320/385/430 mm -Spindle mount: SK30 -Drive: 1.1 kW -Speed speeds: 560 to 14000 rpm, 8 levels -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477kg

Verboom tenon milling machine Brand: Verboom Type: PN 5 LINKS Standard: BHG / SHA adapted according to the currently valid regulations Labour legislation applicable within the EU Machine data: Pinon milling machine with 5 processing units (1 saw + 4 milling machines) 1. Saw unit positioned over the workpiece, 4.0 kW, ø400 mm 2 tenon milling unit over the workpiece with 2.2 kW 3. Pinon milling unit below the workpiece with 2.2 kW 4. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive 5. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive All motors are equipped with zero branch safety, The machine has a pressure guard so that the workpiece must be clamped before the aggregates start, The hood and the protective curtain are equipped with door switch. ...

Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Manufacturer: Elu, copy milling machine type AS 70 -Milling length: 365 mm -Milling width: 100 mm -Milling stroke: 45 mm -Motor: 220/380V 740W -Spindle speed: 12000 rpm -Dimensions: 800/750/H1320 mm -Weight: 108kg

TechnologieCNC Milling Machine CNC 1530 6kW INDUSTRY CNC milling machine 1530 6kW - INDUSTRY version ✅ Professional, industrial CNC milling machine mod. 1530 INDUSTRY with a 150x300cm working table equipped with an ultra-efficient 6kW electrospindle on a full ceramic bearing. The height of the Z axis is 300mm. ✅ The machine is protected by protective light barriers that prevent intrusion into the working area of the machine during operation. ✅ The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Information: Manufacturer: TechnologieCNC Model: 1530 INDUSTRY Electrospindle: 6kW at S1, 7.2kW at S6. 24000rpm on a full ceramic bearing Max. speed in slow travel: up to 33m/min Max. working speed in materi ...

Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm -Weight: 352 kg

SERON 1315 EXPERT CNC milling machine built in Poland in 2017 is new and has never been used. The machine designed and manufactured with attention to the smallest details, is used for precision machining of a wide range of materials such as mild metals, plastics, carbon, wood, wood-like panels and glass. All vibrations and deformations during the milling process are eliminated by the high-quality ribbed steel construction with a T-slot table made of aluminium profiles, with a length of 1500 mm and a width of 1300 mm. The workspace is additionally equipped with a special PVC overlay to protect the table cover while cutting the workpieces through. At the end of the table there is a six-position linear magazine with an automatic tool correction sensor. The 1315 EXPERT machine axes are driven by highly dynamic and precise brushless AC servo drives with back pressure, equipped with serv ...

CNC Vertical Milling Machine Make: JAFO Model: FYN 50 NB X-axis: 800 mm Y-axis: 500 mm Z-axis: 500 mm Year of construction: 1988 Controls: Heidenhain Operating voltage 380 V Control voltage: 24 V Total power consumption: 10 KW Weight 4,000 kg The track-controlled JAFO - FYN 50 NB NC vertical milling machine is designed for milling work on parts weighing up to 700 kg, including the clamping device. Consoles with table are equipped with a hydraulic counterweight. The well-sized guideways for the console on the stand chest and the guideways of the table are hardened. All counter guides are covered with "TURCITE" plastic and always remain in contact with the corresponding guides along their entire length. (no overflow). The vertical milling spindle, which can be swivelled in one plane, is attached to the transversely adjustable crossbeam. The milling spindle is driven by a t ...

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent (optional WIN PCNC Economy, USB or professional). If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional  ...

Groove butt head for milling machine, milling head, CCCP / USSR STANKO Type 1502 Nr: 200 Year of construction 1974 Stroke size: max. 60 mm Number of strokes: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment- As with the normal vertical head, the drive can be swivelled continuously from the machine gear drive via driver, centered in the centering diameter - Degree scaling on the flange plate +/- 45 - This groove butt head is flanged in place of the normal vertical milling head (assembly in place of the vertical milling head, milling head) Weight: 42 kg good condition Groove butt head stock number 58166 and vertical milling head stock number 58164 from identical STANKO milling machine.; used

Spindle milling machine, swiveable Brand: Panhans Type: 245/20 New machine Technical specifications: - Table size 1100 x 760 mm - table height 870mm - Milling spindle 30 mm, not exchangeable - Clamping height 140mm - Height adjustment 125mm - Extraction nozzle 2 x Ø 120mm - 4 speeds 3000/4500/6000/9000 rpm. - Weight approx. 800 kg - Motor power 5.5 kW / 7.5 PS - voltage 400V / 50Hz - Space requirement 1200 x 1400mm Solid German mechanical engineering Table milling machine with double-sided swiveling permanently installed milling spindle for a swivel range from -5 ° to + 45.5 ° Positioning control for height and swivel adjustment with zeroing of the height and offset Electronic position and speed indicators Quick release belt device Push button for spindle start and stop Left and right rotation Quick clamping device for milling cutters Finely planed gray c ...

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

CNC Wood Milling Machine 6KW 1300x2500 CNC milling machine 1325 INDUSTRY 2.0 6KW 1300x2500 ◼Invest in the quality of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ◼The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1300x2500mm and a clearance in the Z axis of 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. ◾Hybrid table, i.e. vacuum, enabling non ...