used MICRON ENGLAND Twist Drill Grinding Machines

IBEX MOG 2130BA Serial No. 931278 / 01B 400V, 5.5A integrated fan motor Connections: DN 80 Double mechanical seal, sealingwater connections

Inv. Num. : 3496 Type: TMH 3 Producer: MICRON Generated: Parameters: To GO 11 holes can be drilled at the same time Minimum distance between holes: 32.8 mm Drilling diameter: 3 mm Speed: 24 - 1415 rpm

Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED

Material: stainless steel 1.4571 Content: 4040 ltr Pressure (inner): 6 / - 1 bar Weight: 14000 kg Length x Width x Height: 7000 mm x 1600 mm x 2100 mm Machine equipped with vapour filter. Drive : hydrostatic, compression 250 bar, revolution 180 Upmmax.; Torque motor : 12000 Nm; Torque : 24000 Nm ; Volume jacket : 268 ltr. Temperature indoor and jacket : + 300 ° C / - 10 ° C; Exchange area : 31,4 m². Very good condition! You can also get the entire system with all components you need.

Material: stainless steel The Flexomix is a vertical continue mix- and agglomerate engine with high capacity and need a minimum of space. The way of working is easy of operation, with a minimum of man power. Very good for the use of ultrafine, light products like washing powder and much more. Very good condition, like new. You can also get the entire system with all components you need.

Stock# U2408-1 Used stainless steel conical mixer-dryer by Hosokawa Micron type 3-VDC-22. Total volume 798 l, working volume 300 l. Drying chamber is rated full vacuum. Working temperature up to 80 C. Conical bottom is equipped with heating coil with total volume 46 l, designed for work on pressure 6 bar, at working temperature up to 130 C. Elipsoidal top has inspection manway with diameter 250 mm equipped with bolted lid. Top has heating coil with volume 7,4 l, designed for work on pressure 6 bar, and working temperture up to 130 C. Dryer has stainless steel unsupported mixing screw driven via gearbox and el. motor 1.5 kW. Rotating arm is designed in stainless steel and driven via gearbox and el motor 0.25 kW. All motors are in Ex design (EExeIIT4). Bottom central discharge via outlet with diameter 200 mm and pneumatically operated ball valve. Last time machine had been working in ph ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Micron B.V. Vrieco Nauta Minimix stand alone lab mixer machine. A miniature stand alone plug-and-play processing plant for the small scale processing of small batches of just a few grams, perfect for the laboratory or R&D projects. It allows to test or produce material a reduced scale. The Nauta Minimix is a gentle conical screw mixer, specially developed for R&D work ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Micron B.V. Vrieco Nauta Cyclomix lab mixer. A miniature stand alone plug-and-play processing plant for the small scale processing of small batches of just a few grams, perfect for the laboratory or R&D projects. It allows to test or produce material a reduced scale. The Mini Cyclomix lab mixer is a stand-alone, high shear batch mixer with exchangeable product bowls,  ...

Cone / V-mixer VRIECO mixer from the company HOSOKAWA MICRON B.V. Mixer Type: S 20 VV-1 Machine number: 59619 Year of construction: 1979 incl. manual with circuit diagrams VRIECO-NAUTA Mixer HOSOKAWA MICRON B.V. Mixer Type: 25 LFC-43 Machine NO.: 3000142 Year of construction: 1994 incl. manual with circuit diagrams Size: approx. 2m x 2m x 6m The technical data can be found in the type plate. The offer includes only the parts shown in the photos. If you have any questions, inquiries or the like, please send us an e-mail.

* General * SKU374U1018 * LocationBarneveld * MakeHosokawa Micron Europe B.V. * Type100 RV-4 * No.101365/2310049 * Year of construction1992 * Main Features * MaterialStainless steel * Volume10000 Ltr. * Motor11 KW * Specified Features - Conical mixer * Conical mixercheck * Capacity10.000 Ltr * Largest cone diameter3300mm * Cone height4935mm * Manhole2x * With stainless steel armcheck * Top drivecheck * Motor11 kW, 380 volt + 1,1 kW, 220/380 volt * Bottom bearing pintle bearingRadial screw bearing * Bottom discharge4x Dia. 125mm * MaterialStainless steel 1.4301 (304) * Information * Floor space3,6x3,6 m * Total height6,5 mConical mixersHosokawa MicronMixers > Conical mixersBrand > Hosokawa Micron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

* General * SKUR1410 * LocationBarneveld * MakeHosokawa Micron B.V. (NL) * TypeHMPD-20-10 (easy clean) * No.6444301000 * Year of construction2000 * Main Features * MaterialStainless steel * Motor0.55 KW * Inlet diameter200 mm * Specified Features - Rotating valve * MaterialStainless steel * Rotary valvecheck * Rotor diameterca. 250mm * Rotor width215mm * Number of locks:6 * Lock sizes215x115x55mm * Inletdia. 200 * Outletdia. 200 * Installation height390mm (with extension 490mm) * With motor0.55 kW 230/400 Volt * Rotor speed23 rpm * Information * Total height0,5 M * Weight200 Kg * CEcheck * Floorspace1,3x0,5 MRotating valvesHosokawa MicronRotary valves > Rotating valvesBrand > Hosokawa Micron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...

* General * SKU074B395 * LocationBarneveld * MakeHosokawa Micron B.V. * TypeISEM-200, Flange dia. 340mm * Mach.No.60153 * Main Features * MaterialStainless steel * Inlet diameter200 mm * Specified Features - Miscellaneous transport * MaterialStainless steel 1.4571 (316Ti) * Information * Year of construction1994 * Floorspace0,63x0,75 m * Total height0,47 m * Weight150 kg * Extra SpecificationsBall segment valve Miscellaneous transportHosokawa MicronConveying systems > Miscellaneous transportBrand > Hosokawa Micron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU050A273 * LocationBarneveld * MakeHosokawa Micron Europe * TypeG-1030 * No.97100003.03 * Year of construction1990 * Main Features * Motor7.5 KW * Inlet diameter260 mm * Specified Features - Hammer Mill * MaterialMild steel * Hammer Mills * GrinderVictory mill (1x) * Rotor sizedia. 260mm * With sieve cagecheck * With grinding trackcheck * Motor7,5 KW, 380 Volt * Information * Mounted on framecheck * With switchgearcheck * Floorspace1,2x0,9 M * Total height1,6 MHammer MillsHosokawa MicronMills > Hammer MillsBrand > Hosokawa Micron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU045G317 * LocationBarneveld * MakeHosokawa Micron * TypeVP-4 * No.420135 * Year of construction1973 * Main Features * Motor55 KW * Inlet diameter630 mm * Width400 mm * Specified Features - Hammer Mill * MaterialStainless steel * Hammer Mills * GrinderVictory mill (1x) * Rotor sizeDia. 630x400mm * Fixed hammers(60 flat hammers) * Hammer width400mm * With grinding platenscheck * Inlet400x400mm * Motor55 KW, 380 Volt * Speed2650 Rpm * Information * Mounted on framecheck * Floorspace2,2x1,8 M * Total height1,8 MHammer MillsHosokawa MicronMills > Hammer MillsBrand > Hosokawa Micron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU205W061 * LocationBarneveld * MakeHosokawa Micron * Type06-VB-01 * No.6045502000 * Year of construction1997 * Main Features * MaterialStainless steel * Volume72 Ltr. * Motor1.1 KW * Specified Features - Conical mixer * MaterialStainless steel 1.4306 (304L) * Density0.6 kg/dm³ * Conical mixercheck * Capacitynetto 72Ltr. with liquids, netto 60Ltr. with solids * Dished topcheck * With stainless steel armcheck * Top drivecheck * Motor1,1kW * With variable speed drivecheck with frequency converter, 39-156 rpm * Motor0,18kW * With variable speed drivecheck * Cantilevered screwcheckwith frequency converter, 1,3-5,2 rpm * Bottom dischargecheck * Outlet with sliding valvecheck * Polished insidecheck * Suitable for liquid/pastecheck * Information * Mounted in framecheck * Weight350 kg * CEcheck * With switchgearcheckConical mixersHosokawa MicronMixers > Conical mixersBrand > Hosoka ...

* General * SKU302T1369 * LocationBarneveld * MakeHosokawa micron * Type315 UPZ Mill clovebox * No.MF 2065 * Mach.No.2700/0001/0 * Main Features * MaterialStainless steel * Specified Features - Miscellaneous * MaterialStainless steel 1.4401 (316) * Capacity±1440 Ltr. * Information * Year of construction2000 * Weight500kg * Floor space1.8x1m * Total height2,2m * Extra SpecificationsRear connection Dia: 760mm MiscellaneousHosokawa MicronMiscellaneous > MiscellaneousBrand > Hosokawa Micron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU302T1369 * LocationBarneveld * MakeHosokawa micron * Type315 UPZ Mill clovebox * No.MF 2065 * Mach.No.2700/0001/0 * Main Features * MaterialStainless steel * Specified Features - Miscellaneous * MaterialStainless steel 1.4401 (316) * Capacity±1440 Ltr. * Information * Year of construction2000 * Weight500kg * Floor space1.8x1m * Total height2,2m * Extra SpecificationsRear connection Dia: 760mm MiscellaneousHosokawa MicronMiscellaneous > MiscellaneousBrand > Hosokawa Micron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Drill diameter maximum: 25 mm Drill diameter minimum: 2 mm MACH-id    5177 MAKE         Cuoghi Italia TYPE           Ep 25 YOP             1997 SPECIFICATIONS Cylindical / Surface / Other       Sharpening twist drill Grinding diameter Ø      1,5 to 25 mm        Grinding length       Edge 1 - 6 mm Grinding wheel size        40 Gr. - 180 Gr. mm kW power on spindle         0,38 kW DIMENSIONS Length         740 mm Width           680 mm Height        1170 mm  

Drill diameter maximum: 25 mm Drill diameter minimum: 2 mm MACH-id    5177 MAKE         Cuoghi Italia TYPE           Ep 25 YOP             1997 SPECIFICATIONS Cylindical / Surface / Other       Sharpening twist drill Grinding diameter Ø      1,5 to 25 mm        Grinding length       Edge 1 - 6 mm Grinding wheel size        40 Gr. - 180 Gr. mm kW power on spindle         0,38 kW DIMENSIONS Length         740 mm Width           680 mm Height        1170 mm  

Spiral drill grinding machine Offer number: 20063 Make: SCHANBACHER Type: S 3-50 Machine Number: 92-2083 Built: 1992 Technical data: - Easy to use - Grinding process by means of gearmotor - Spiral drill dimensions 3 - 50 mm - Angle 90 - 140° - adjustable free angle - Grinding motor 400 V / 0.25 kW - Gearmotor for swivel movement 400 V / 0.12 kW - Grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - Space requirement approx. W 810 x D 570 x H 1260 mm - Weight approx. 120 kg - with - Clamping device - Presetting device

Drill diameter maximum: 0 mm Drill diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. drill capacity: 3 mm Max. drill capacity: 40 mm Spitzwinkel min.: 40 ° max.: 180 ° Diameter of grinding wheel: 200 mm Width of the grinding wheel: 250 mm Drilling cap. of grind.wheel: 32 mm Grinding wheel speeds: from: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 0.76 kW Machine´s weight about: 170 kg Overall dimensions machine: Length: 840 mm Width: 820 mm Height: 1200 mm Various accessories: 6-jaw chuck diameter: 130 mm Lamp Set of grinding wheels Set of flanges Coolant system Set of service tools

Drill diameter maximum: 0 mm Drill diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. drill capacity: 0.5 mm Max. drill capacity: 6.35 mm Spitzwinkel min.: 60 ° max.: 180 ° Freiwinkel min.: 0 ° max.: 15 ° Diameter of grinding wheel: 125 x 35 x 50 mm Voltage: 220 Volt Power: 0.15 HP Machine´s weight about: 35 kg Overall dimensions machine: Length: 500 mm Width: 300 mm Height: 300 mm Various accessories: Grinding of double-edged lips Grinding of four-edged lips Centering microscop

Drill diameter maximum: 0 mm Drill diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. drill capacity: 1 mm Max. drill capacity: 12 mm Spitzwinkel min.: 75 ° max.: 150 ° Freiwinkel min.: 40 ° Diameter of grinding wheel: 125 mm Grinding wheel speeds: up to: 2800 rpm Voltage 50 Hz 3x: 230 Volt Grinding spindle motor: 0.35 kW Machine´s weight about: 50 kg Overall dimensions machine: Length: 500 mm Width: 500 mm Height: 500 mm Various accessories: Set of grinding wheels

Drill diameter maximum: 0 mm Drill diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. drill capacity: 0.2 mm Max. drill capacity: 6 mm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 900 kg Overall dimensions machine: Length: 1750 mm Width: 1200 mm Height: 1777 mm Various accessories: Coolant system Lamp

Drill diameter maximum: 0 mm Drill diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. drill capacity: 0.5 mm Max. drill capacity: 6.35 mm Spitzwinkel min.: 60 ° max.: 180 ° Freiwinkel min.: 0 ° max.: 15 ° Diameter of grinding wheel: 125 x 35 x 50 mm Voltage: 220 Volt Power: 0.15 HP Machine´s weight about: 28 kg Overall dimensions machine: Length: 400 mm Width: 300 mm Height: 280 mm Various accessories: Grinding of double-edged lips Grinding of four-edged lips Centering microscop