used MICRO TIP Sandblasting Equipment

Fit the PVS 125 or 150 mm Reework construction group or simply to fit in the Exchange or replacement for food TEC / Busser / Stephan / Dacia / or similar Reeworkanlagen for the bread / baking / food industry for the production of bread mash or similar products

For sale: Micro Motion Mass Flow Sensor CMF010P323NB Order number: 8000.2 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.

: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Amplifier unit, amplifier -Type: DT110-U15-A-C2 -Series: multiNCDT -Dimensions: 65/170/H40 mm -Weight: 0.38 kg

For sale:Micro Motion MASS flow sensor Type: CMF 200 ANSI 300 LBS Exclusive channel Order number: 8000.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.

For sale: Micro Motion MASS flow sensor 1" Order number: 8000.22 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 110 bar -Liter output: 0.25 l/min -Motor: 24 V 22 W. -Hydraulic tank -Dimensions: 195/280/H160 mm -Weight: 17 kg

Can Filling Line for Beer and CSD Micro Can 2000 cph – 2020 Complete line from can depalletizer to rotary collection table made by British Micro Can company in year 2020. The line is in very good condition and it has operated only approx. 100 hours (totally filled 133’049 cans). Filling block is linear type with five long CO2 purge tubes for pre-evacuation of air, five stainless steel bottom closing, pneumatically operated filling tubes. In CL5 V3e machine both CO2 and filling tubes are lowered and lifted by an electronic gantry that allows fine control of the filling head position and a fully electronic one head seamer that allows for more accuracy and less dependent on compressed air pressure. The seamer fully adjustable for most can sizes without requiring spacers. Filling block has also CIP sequence for upto 70 C degrees for an adequate cleaning. After sealing, full cans ar ...

Description: Machine number 4513 Power output 0.2 kW 220/110 V, 50 Hz weight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 640 x 500 x 800 mm

Description: Conventional control Clamping length 1500 mm Centre height above slide 350 mm Swing diameter 500 mm Tailstock cone MK4 Quill stroke 45 mm Main spindle speed infinitely variable 1/min Tool speed infinitely variable rpm Total power requirement 4 kW Description: Automatic oscillation of the longitudinal axis Wedge bar chuck Schunk ROTA-S 250-62 Full spindle (100 mm clamping depth in the chuck) Integrated extraction system Work area lighting Various accessories (tailstock centres, polishing discs, etc.) Approx. Onsite Dimension. (l x w x h): 2,800 x 1,200 x 1,800 mm, weight approx.: 2,000 kg

Precision air chuck Ø240mm (Type 9-500-6QC) Technology: APC Repeatability approx. 0.0015 Jaw stroke 12mm concentricity: approx. 0.005 mm base jaw DRM 134-182mm - as new unused air chuck Equipment: - Jaw Ø 174 - 182mm Use of a high-precision pneumatic pull-down chuck with special jaws and workpiece stop. To ensure accuracy during jaw change and to realize the required set-up times, the chuck is equipped with the QC precision jaw change system. Replaceable module pins in the hardened special jaws take over the task of secure tooth flank contact.

Tipper Tie Technopack TCNV pneumatically operated single-clipper for natural casings, ring-shaped casings, end casings or artificial casings made of collagen, cellulose or PVDC, as well as bags made of polyester, polyethylene or linen The machine is immediately available and can be tested in Koblenz, Germany.

TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

Tipper Tie TAN, automatic single-clipper, calibres up to 55 mm, for natural casings, ring casings or synthetic casings made of collagen, cellulose or PVDC, up to 320 cycles/minute, on a trolley You are very welcome to inspect the machine at our facility in Koblenz, Germany.

8 boxes with Tipper Tie clips

Tipper Tie Alpina Swopper SW330S 330 litre bowl cutter. Running in production until the factory closed in 2020.

Used continuous cutter TIPPER TIE ALPINA, type: TTChop 55V El. Connection: 3x 400 V, 50 Hz, 380 / 500 / 555 A, 10 kA, 212 kW, 150 bar Net weight: 7,800 kg Further information on request.

Optical button, proximity switch -Type: IRD-4P-024-12 -Construction: M30 -Ignition protection type EExd category: 2G/D -more robust and fail-safe: proximity switches -Weight: 0.7 kg

Table Clipper Tipper Tie TCNA 200, Weight approx. 12kg, used, fully functional

Table Clipper Tipper Tie TCNV 200 A, Weight approx.: 12kg, good used condition, fully functional

Tipper Tie technopack table model clipper, dimensions: 200 mm x 300 mm x 850 mm. Including crate with clips.

Tipper Tie technopack mobile double clipper, model: KDCN, number: 1094.156, dimensions: 550 mm x 1000 mm x 180 mm.

Mobile double clipper. These user-friendly and efficient machines handle natural, artificial, and fibrous casings for a variety of portioned food and non-food applications. Durable stainless steel construction. Applications – sausage, fresh ground meats, soy tofu/tempeh/seiten chubs, vegan sausage, fresh ground fish, surimi/fish sausage paste, raw/frozen/refrigerated pet food, pumpable cheese, soup, sauce, and industrial explosives chub packages. Capacity up to 130 cycles / min depending on the product. Air pressure: 6 bar. Power: 380 V - 50 Hz - 0,5 Amp. Stainless steel control panel with Siemens S7-200 PLC and on/off switches., Including ± 40 reels of clips, type XEC21-210T., Additional features:, This machine can be combined with the vacuum filler, Stock Number #1059 (Vemag HP3), see photo. Additional piping in between the 2x machines is excluded., Type of Machine: Double clipper,  ...

Max. useful capacity [dm3] 170 Max. batch weight [kg] 500 Blast room inside dimensions [mm] : Ø700 x 988 Max. workpiece diagonal [mm] : 350 Max. weight per workpiece [kg] : 23 Number of blast wheels : 1 Power per blast wheel [kW] : 11 Abrasive throughput, max. [kg/min] : 180 Initial abrasive filling [kg] : 180 Air required for dust collection [m3/h] : 1 600* Installed power, approx. [kW] : 12,3 Dimensions, approx. [mm] A : 3 730 x B: 2 070 x C : 1 610 Weight, approx. [kg] : 2 300 Max. carrying capacity of loader [kg] : 500* Power of loader [kW] : 7,5 Weight of loader [kg] : 1 250