1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 202
item-No.: 126876116
1995
1.092 €
-
Technical data: Brand: Ott Type: Rondomat R/260 Workpiece thickness 8-40 mmgeeignet for all commonly used edge above stand be milling Copy milling machine for flush milling, chamfer milling and mill RADIUS 0.5 kW Weight ca: 100 kg
Category: 107
item-No.: 126880105
pressure: 120 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 250 mm ram stroke speed: 90 mm/sec working feed: 7,5 mm/sec dayligth: 65 mm table height: 900 mm oil volume: 150 l dayligth: 385 mm total power requirement: 7,5 kW weight of the machine ca.: 5550 kg dimensions of the machine ca.: 4350x2100x2325 mm Domestic equipments: - DELEM DA 52 S - controlled axes: Y1 - Y2 and X - manual crowning - AKAS - laser protection device for the machine - Upper tool, Rehfuß - lower tool, die block wit ...
Category: 1101
item-No.: 126762961
Steam Turbine Plant equipment 4450 kWe This steam turbine power plant equipment was made in 2012-2013 as a part of a natural gas combined cycle power plant. The original power plant was commissioned in November 2012. The steam turbine is condensing type and it is capable of 4450 kW electrical power generation. Other equipment consists of a steam condenser, an oil module, a cooling tower for STG’s oil cooler and for condenser, the control panels and a demineralized water preparation unit. All the equipment is i ...
Category: 107
item-No.: 126880107
pressure: 130 t chamfer lenght: 3050 mm distance between columns: 2550 mm : 500 mm : 440 mm : ± 10 mm throat: 305 mm table width: 90 mm table height: 800 mm toolpiece height max.: 100 mm : Speeds: Y-rapid travel: 140 mm/s : 8 mm/s : 140 mm/s : 500 mm/s : 150 mm/s : 500 mm/s : : : 0,01 mm : 0,02 mm : 0,05 mm : 0,05 mm : : : 250 mm : 600 mm : 1000 mm : 150 mm : control: 2D-Grafiksteuerung : : : ca. 11 kW voltage: 3x 400V/N/PE 50 Hz : 6 ± 1 bar : : : ca. 3500x1700 mm height: 2600 mm weight: 9.100 kg Machi ...
Category: 103
item-No.: 126751035
Spindle speeds by 31.5 2000 13 steps (increment 1.41) UpmBohrvorschübe per Spindelumdrehung6 levels of 0.03 0.32 mm / USpindelschlitten EilgangStufenlos controllable hydromech. Feed drive for longitudinal and transverse hydr. Clamp for longitudinal and transverse table size 630 x 1000 mmTischverstellung LW 630 x 1000 mmTischverstellung across 600 mmVerst. d. boom 650 mmHmhhnz9ssVerst. d. of spindle slide 300 of mmFrässpindelausladung 630 mmGröáter workpiece diameter for circular milling: 1800 mm
Category: 107
item-No.: 126880109
pressure: 40 t chamfer lenght: 1250 mm distance between columns: 1050 mm Control: DELEM DA-52 stroke: 130 mm table height: 870 mm total power requirement: 4 kW weight of the machine ca.: 3.000 kg dimensions of the machine ca.: 2750x1950x2200 mm This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 1300
item-No.: 126738770
Qty. 1 Second-hand TIG welded stainless steel tube production line Mfc.: Woosung Machinery Co Built: 2002 ~ 2004 Condition: Excellent condition Strip thickness: 0.9 – 2.0 mm [at no. 9] thickness is 0.9 – 1.5 mm] DIA.: 12.7 - 101.6 MM Welding speed: approx. 3 m/min Welder: TIG 650a , TIG 500a Mill drives: V.S. drive at tube lines 2], 3], 5], 10], 11], 12] A.C. inverter drive at tube lines 1], 4], 6], 7], 8], 9], Motor power: 15 kW at tube lines 2], 6] 11 kW at tube lines 1], 3], 4],  ...
Category: 203
item-No.: 126880044
2013
used machinery auction RESALE 2.500 €
Land-de DE
serial number: 60.03.011.13 Weight approx.: 800 kg planing width: 510 mm Dimensions (l x w x h) approx.: 2500x1300x900 mm main motor: 7,35 kW blade: 4 piece surface table length: 2250 mm Description: FORMAT 4 Plan 51 Surface Planer The loading and unloading table must be checked and, if necessary, adjusted Technical data: -7.35 kW (10 hp) -Planing width 510 mm -Table length 2250 mm -DUAL Folding System with Spring Support -Max. Chip removal 8 mm -Professional planer fence with parallelogram adjustment -EURO-KOMFORT ...
Category: 1101
item-No.: 126738656
Motor: MWM Motortype: TRHS 518 V12 Power: 420 kVA / 336 kW Generator: Stamford HC 534 Hours of operation: Only 315, was used as a emergency power system 2009 built in container Automatic control cabinet Tank: Approx. 1000 Liter
Category: 207
item-No.: 126879942
1998
used machinery auction RESALE 4.000 €
Land-de DE
serial number: 0-261-03-8744 Weight approx.: 1200 kg Dimensions (l x w x h) approx.: 4600 x 1300 x 1700 mm feed: 11 m/min edge thickness: 0,4 - 8 mm workpiece thickness: 8 - 50 mm gluing unit: Quick Melt-Verleimteil für Schmelzkleber snipping unit: 2 Motoren je 0,27 kW, 200 Hz, 12.000 U/m rough trimming unit: 2 Motoren je 0,27 kW, 200 Hz, 12.000 U/m fine trimming unit: 2 Motoren je 0,35 kW, 200 Hz, 12.000 U/m flat scraping unit: ja/ yes edge buffing unit: 2 Motoren je 0,09 kW workpiece width min.: 70 mm Descriptio ...
Category: 104
item-No.: 126727171
SAW BLADES - AT CHAMFER MACHINE LOROCH AK - 21-99-001 Shipping time: immediately Number: 21-99-001 Manufacturer: Loroch Type: AK MACHINE DATA Year of production: around 1995 L x W x h: approx. 1200 x 800 x 1900 mm Weight: 1300 kg Very good condition TECHNICAL DATA Loop scope: Min. blade Ã?: approx. Ã? 70 mm Max blade diameter: approx. Ã? 710 mm Smallest pitch: approx. 3 mm Largest tooth pitch: approx. 25 mm Max blade width: 6.5 mm Chamfer angle: 45 degree ...
Category: 702
item-No.: 126876505
tools: 1 whip, 1 four wing beater, 1 two wing beater (like a guitar)\r\nbowls stainless steel include trolley
Category: 104
item-No.: 126727137
CNC - SÃ?GEBLATTSCHÃ?RFMASCHINE LOROCH K/CNC 910 - 21-06-006 Shipping time: immediately Number: 21-06-006 Manufacturer: Loroch Type: K / CNC 910 MACHINE DATA Year of construction: approx. 1990 L x W x h: approx. 1500 x 800 x 1900 mm Weight: approx. 900 kg Good general condition TECHNICAL DATA Loop scope: Min. blade Ã?: approx. Ã? 80 mm Max blade diameter: approx. Ã? 910 mm Smallest pitch: approx. 16 Largest tooth pitch: approx. 999 Max blade wi ...
Category: 702
item-No.: 126876627
chamfered up at the rear,\r\nwith supporting frame with panels on 3 sides.\r\nbelow basin d 535/400 / w 500/400, h 200mm\r\nupper basin d 335/280 / w 500/400, h 280mm\r\ndistance basin from the floor\r\nbelow 525 / upper 1060 mm\r\n
Category: 104
item-No.: 126727135
CNC - SÃ?GEBLATTSCHÃ?RFMASCHINE LOROCH K/CNC 910 - 21-06-005 Shipping time: immediately Number: 21-06-005 Manufacturer: Loroch Type: K / CNC 910 MACHINE DATA Year of construction: approx. 1990 L x W x h: approx. 1500 x 800 x 1900 mm Weight: approx. 900 kg Good general condition TECHNICAL DATA Loop scope: Min. blade Ã?: approx. Ã? 80 mm Max blade diameter: approx. Ã? 910 mm Smallest pitch: approx. 16 Largest tooth pitch: approx. 999 Max blade wi ...
Category: 806
item-No.: 126869161
2006
24.438 EU?
Land-pl PL
The machine is a combination of offset with digital printing. The entire process runs automatically - from setting up the plates to exposure, printing and cleaning - in one system. Thermal exposure of the plates takes place directly on the machine cylinders, it does not require chemical processing with a perfect fit. The machine works in anhydrous printing technology.
Category: 1101
item-No.: 126726367
NEW UNUSED WARTSILA 3 x W4L20 Gen sets DNV CLass WITH IMO MARINE_EPA-TIER 2 650KW, 900 RPM, 60Hz;937 KVA MFT YEAR : 2009 QTY- 3 SETS
Category: 207
item-No.: 126833967
2003
used machinery auction RESALE 5.500 €
Land-de DE
serial number: 0-261-06-2100 Weight approx.: 2500 kg control: PC 16 Dimensions (l x w x h) approx.: 5300x1250x1820 mm feed: ca. 11 m/min edge thickness: 0,4 - 8 mm workpiece thickness: 8 - 40 mm joint trimming unit: 2 x 2,2 kW, 200 Hz, max. 3mm snipping unit: Fase/Gerade, je 0,27 kW, 200 Hz, 12.000 fine trimming unit: 2 x 0,40 Kw profile trimming unit: 2 x 0,35 kW, 200 Hz, 12000 1/min. flat scraping unit: ja / yes profile scraping unit: ja / yes edge buffing unit: 2 x 0,18 kWja total power approx: 12,2 KW Descri ...
Category: 2100
item-No.: 126664425
new
149 €
-
The portable LCR measuring instruments of series U1730C of Keysight skills, usually only linked table instruments in connection. The measurement is faster by identifying with a simple touch of a button. Mobile measurements are made easier by a battery that keeps for up to 16 hours. The portable LCR measuring instruments allow the inspection of component types including secondary components of the dielectric dissipation factor (D), of the quality factor (Q) and the angle display of impedance (θ). They i ...
Category: 102
item-No.: 126817711
turning diameter: 200 mm turning length: 555 mm control: Siemens 840C spindle bore diameter: 65 mm turning speed range: 25 - 5000 U/min power requirement: 28 / 18 kW number of tapers in turret head: 12+12 number of driven tools in turret: 12+12 Spindel speed of driven tools: 40 - 4200 U/min y-axis: +/- 40 mm weight: 7 t dimensions: 5,2 x 2,3 x 2,1 m swing diameter: 240 mm spindle distance: 800 mm CNC-Lathe with driven tools, Y-axis, sub-spindel, tailstock. This ad was created with MODUL MWS - the software solution ...
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more MF types: