used MEUSER Production Lathes

MEUSER M II S gap bed engine screw cutting lathe Swing over ways 600 mm Swing over cross slide 400 mm Swing in gap 860 mm Turning length 1500 mm Spindle speed 1200 rpm Steady rest Chucks- 3 pcs Threads metric & English Weight ca. 2500 kg

3 claw chuck 4 claw chuck dia 1100 mm 1 steady Distance between centers: 7000 mm Swing over bed: 1480 mm Swing over cross-slide: 1150 mm Swing in gap: 1800 mm Diametre of main spindle bore: 102 mm Power on main spindle: 22 kW Number of speeds: 8 > 400 rpm

Luenette of a Lathe Meuser M4. Tadeloser very good condition. Maximum diameter approx. 260mm Peak height approx. 450 - 460mm 2 Roller guides and a gliding guide Drawing approx. mass plus /minus 5mm Special price

Three-jaw chuck diameter 240mm

Center width: 1500mm, max. chuck diameter: 200/240mm, motor power: 4kW, including steady rest, on-site inspection is possible.

Center height: 360mm, bed width: 430mm, turning length: 1500mm, with documentation.

Center width: approx. 1400mm, center height: approx. 550mm, spindle diameter: approx. 100mm, faceplate: 1000mm/820mm. Speed: 560rpm, lathe chuck: 400mm/320mm.

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm centre height: 205 mm centre distance: 1000 mm spindle bore: 47 mm spindle turning speed range: 28 - 1250 U/min feeds - longitudinal: 0,03 - 8,8 mm/U feeds - cross: 0,006 - 1,84 mm/U thread - mm pitch: 0,25 - 76 mm thread - inch: 1/2 - 152 Gg/ thread - module: 0,25 - 22 mm bed width: 320 mm tailstock quill diameter: 55 mm tailstock taper MT: 4 total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimensions of machine L x W x H: 2,32 x 1,15 x 1,22 m Accessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 25 - 2000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,5 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,50 x 1,08 x 2,50 m Accessories: box table 1100 x 700 x 550 mm, coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1400 mm turning diameter over slide rest: 1400 mm centre distance: 1500 mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 50 mm, 1500 mm, 1400 mm

Code 231017 Description Radial drilling machine Make MEUSER + CO Model M 50 R Serial No. 39112 Year ???? Capacity in Steel 60 50 mm Capacity in Cast Iron 60 mm Thread cutting in Steel 60 M 45 Thread cutting in Cast Iron M 55 Spindle taper 5 MC Spindle radius: max/min 1700/600 mm Spindle traverse 1100 mm Min / Max height spindle / top of base plate 500 / 1400 mm Arm truss 600 mm Quill stroke 310 mm Number of speeds 18 Spindle speed range 25 – 2000 rpm Number of spindle feeds 14 Spindle feed range 0.06 – 0.80 mm/rev Baseplate size 2400 x 860 mm Clampsurface base plate 1700 x 860 mm Main motor 5 kW - 380 Volts Dimension of machine 2400 x 1100 x 2800 (3100) mm ( L x W x H ) Weight 4070 kg Accessories Box 650 x 500 x500 mm Coolant Hydraulic clamping Conditon Machine is in very good and nice condition

Bezel traveling, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, bezel from lathe type MV SKV/2-1 -Bezel: driving -Max. Passage: Ø 170 mm -Center height: 230 mm -technical drawing: with the photos -Dimensions: 520/405/H510 mm -Weight: 33kg

Bezel, steady rest, lynette -Manufacturer: Homemade fits Meuser, bezel from lathe type MV SKV/2-1 -Bezel: max. passage Ø 370 mm -Center height: 460 mm -technical drawing: with the photos -Total dimensions: 910/255/H985 mm -Weight: 152 kg

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg

Bezel, steady rest, lynette -Manufacturer: Meuser, bezel with coolant connection from lathe type MV SKV/2-1 -Max. Passage: Ø 350 mm -Center height: 460 mm -technical drawing: with the photos -Dimensions: 820/270/H895 mm -Weight: 160kg

Bezel, steady rest, lynette -Manufacturer: Meuser, bezel with coolant connection from lathe M4L -Max. Passage: Ø 500 mm -Center height: 390 mm -technical drawing: with the photos -Dimensions: 840/140/H850 mm -Weight: 98 kg

Moving bezel, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, steady rest from lathe M4L -Max. Passage: Ø 180 mm -Center height: 315 mm -technical drawing: with the photos -Dimensions: 520/535/H560 mm -Weight: 32 kg

Bezel, steady rest, lynette -Manufacturer: Meuser, bezel lathe type M4L -Max. Passage: Ø 325 mm -Top height: 360 mm -technical drawing: in the photos -Dimensions: 640/100/H725 mm -Weight: 70.5kg

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 12,5 - 1000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,7 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,53 x 1,15 x 2,82 m Accessories: swivelling box table, coolant - additional column guide at the end of arm - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35.0 mm bore capacity in cast iron: 40.0 mm arm length: max. 1230 mm turning speeds: 50 - 2250 U/min spindle taper MT: 4 MK base plate: 2030 x 200 mm quill stroke: 220 mm quill feed: 0.04 - 0.40 mm/U total power requirement: 3.62 kW weight of the machine ca.: 1500 kg range L-W-H: 2100 x 1000 x 2570 mm Description - Good gliding ability of the boom thanks to the ground . surface of the outer column - Mechanical locking of the swing movement of the boom - and the headstock displacement - Easy to adjust to the fixed workpiece - Simple, central operation at the front of the machine - Optimum cutting speed thanks to a wide speed range - Quiet running thanks to stable construction - Pole-changing drive motor - automatic spindle feed (0.04/0.07/0.11/0.17/0.28/0.40 mm/rev) - 1x MEUSER clamping cube with T-slots .. 615 x 500 x 510 mm - machined base plate - orig ...

Description: Turning diameter over bed: approx. 500 mm Turning diameter over support: approx. 350 mm Center width: approx. 1500 mm Through bore: approx. 55 mm Speed range: approx. 28 - 1250 rpm Serial nr.: 25689 weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,000 x 1,400 mm

Description: Attention: Drive motor broken off - transport damage (see pictures)! Turning diameter: Over bed: 410 mm Over support: 240 mm Turning length: 1000 mm Center height: 205 mm Center distance: 1000 mm Spindle bore: 47 mm Spindle speeds: 28 - 1250 rpm weight approx.: 1,300 kg, Approx. Onsite Dimension. (l x w x h): 2,320 x 1,150 x 1,220 mm

centre height: 620 mm hollow: max. 400 mm weight of the machine ca.: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

<br>DO PAPER PRODUCTION WITH 2 PAPER FACTORIES & WAREHOUSE, STEINSCHLIFF M'HLE; BleachING, COATING, DEARKING, WATER TREATMENT USW.. <br><br>Still in operation: No<br>Verf Gbar: immediately

Machinery and equipment for the production of cement, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own e ...