We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
380V.
used
Jäger self cleaning filter
used
Machine number: ST-R-1660 Buerstentgratmaschine for the deburring of metal sheets or plates Power supply: 380 V 50 Hz 1.0/1.4 kW 2 speeds: 1500-3000 rpm. Brush diameter: 250 mm
used
Sell a mobile suction system. Well suited for double grinding brackets, tool grinding machines Suction comes from a laboratory workshop and came for sale because of the site closure Dimensions 660mm*680mm*1900mm High top suction pipe Weight150Kg Ffirn32r Extraction capacity 1250m3/h Energy demand 1.1Kw
used
3 phase AC Transformator #4495 Primer: 400V Secunder: 200 V Capacity: 60 kVA
used
Max. pipe diameter: 42mm.
used
Max. bending diameter: 30mm, an inspection is possible.
used
There are five identical machines available, an inspection is possible.
used
Number of filling stations: 10, with hoses.
used
Generator power: 10kW, with documentation.
used
For the storage and pre-treatment of two-component materials such as polysulphides or silicones etc. There are 3 Reinhardt Technik NF1 freezer available. Years of construction: 1) 2009/2) 2000/3) 1999. min. temperature 1/2/3: -45°C/-25°C/-25°C. Capacity: 18l, container diameter/length: 175mm/1000mm, refrigerant: R 404 A / 15. Dimensions: 910mm/500mm/1150mm, weight: approx. 70kg. Documentation available.
used
Technical details on demand.
used
workpiece diameter: 125 mm grinding depth: 50 mm clamping length: 2000 mm total power requirement: 0,5 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _______________________________________________________ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm Max.weight of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head ...
used
Builder: GREEN TECHNIK Model: BS 750 PTO Engine: 66 kW (90 HP) Data: L. 5.700 mm x W. 1.920 mm x H. 2.900 mm Year: 2003 Hourly Production: 25 m³/h Shredding System: 64 HAMMER
used
Capacity: 30 Keg/h , Pressure: 5 bar, Formats: flat- and basket-fitting, Operation / Control: Siemens S5, Features: 2 heads (both filling and cleaning), 2 CIP- vessels , Code: 890
used
Flat conveyor belt on aluminium substructure - MTF Technik GL-HM140 Year of construction:* Flat conveyor belt on aluminium substructure Length of the support belt 260 cm, width of the support belt 37.5 cm With the regulation of the height Mobile conveyor belt, on wheels Price: On request
used
Flat conveyor belt on aluminium substructure - MTF Technik GL-HE010 Year of construction: 2015 Flat conveyor belt on aluminium substructure Length of the support belt 185 cm, width of the support belt 76 cm With the regulation of the height Price: On request
used
- Working range pipe Ø 4 - 28 mm x 3 mm for steel - Working range pipe Ø 4 - 35 mm x 2 mm for non-ferrous metals - Pipe sliding length 3,000 mm - Electronic single-axis control / angle input - Bending radius max. 90 mm - Minimum quantities - Mandrel lubrication - incl. existing tools ( 17.2 x 2 / 21.3 x 2 / 25.0 x 2 / 26.9 x 3 mm ) - Weight approx. 600 kg - L x W x H approx. 3,800 x 600 x 1,100 mm - Incl. operating instructions and spare parts list
used
- Pipe diameter max. 76.1 mm - Pipe sliding length max. 4,500 mm - bending radius 200 mm - Bending direction right - electronic 1-axis control - Twist angle unit with stops - electronic display of rotation - electronic display of the longitudinal position - Mandrel lubrication man. - L x W x H approx. 5,700 x 850 x 1,150 mm - Weight approx. 1,700 kg
used
pressure: 200 t passage width: 2122 mm table surface area: 2100 x 1400 mm total power requirement: 60 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m Press/punch with injection molding unit 200 ton punch upstroke press with injection molding machine (400to) Additional guard locking via 4 power strokes Manufacturer: R+S Technik Year of construction: 2013 / rebuild 2016 Mains voltage/frequency: 400V/50Hz 3~(N/PE Connected load: 60KW Weight about 35000kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: IRW Technik GmbH Type: TZ-100 Power: 100 kVA
used
Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import
used
Transformatoren Technik Jahnsmüller TU6/90M Pri:115/230V 82/41A Sec:230V 39.1A Weight: 49.5kg
used
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Manufacturer: MTF-Technik Year of construction: 2011 Model/ Type: GL-HM140 Condition: Used T20 cleats - approx. 700mm pitch total length: approx. 4600 mm Total width incl. motor: approx. 860 mm Total width without motor: approx. 650 mm Belt width: approx. 625 mm Strap Type: Smooth with studs Material: Steel/ Aluminum Frame height: approx. 110 mm Includes feet on wheels (height adjustable) Includes engine Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to ...
used
- Working range pipe Ø 20 to 60.3 mm (wall thickness 2.3 mm / mild steel) - Preselection 4 bending angles by rotary control - Bending, deburring - Pipe extension length 4,500 mm - Rotation angle unit manual - Spine retreat