used MATSUURA Numerically Controlled Machining Centres

Matsuura MAM 700 HG, 2-fold pallet changer 500 x 500mm, 1 ° indexing, tool magazine with 120 slots. High pressure internal cooling by the spindle, tuber coolant system as new, 800 liters, spindle speed 12,000 rpm Year 99 Good condition, fully operational.

Matsuura MAM 600 HG, 12-fold pallet changer with 1° indexing, 400 x 400mm, YOC 98, control Fanuc, 240 tool positions, Spindle with 15000 rpm ISO 40 BT, high-pressure internal cooling by the spindle, KNOLL coolant system with 1500 liters, Fully operational.

Machining center 5-axis Manafacture: Matsuura Type: MAM 72-25 V Year of construction: 2007 CNC control: Fanuc G-Tech 30i Travel: X/Y/Z: 550 x 410 x 450 mm Table size: Ø 130 mm Pallet changer: 10-fold Tool magazine: 60-fold Knoll high-pressure system Internal cooling 70 bar

Processing Manafacture: Matsuura Type: H Plus 405 PC6 Year of construction: 2003 CNC control: Fanuc G-Tech 16i Travel: X/Y/Z: 600 x 600 x 600 mm Table size: 500 x 500 mm 6-fold pallet changer Tool magazine: 120-fold 4. Axis Knoll high-pressure system Internal cooling 70 bar

Table size 300 x 300 mm Longitudinal travel 450 mm Cross travel 400 mm Vertical travel 400 mm Max. load on table 200 Kg Spindle speeds 50 - 15.000 rpm Tool change 60 pcs Spindle taper ISA 40 Control FANUC18 i - M Timer, machine on 82.300 Timer Cycle hours 17.200 Timer Main motor power 7,5 Kw Equipped with: Pallets 5 PCS. Internal cooling Hand wheel for axes travel Short arbors Interface RS-232 C Turn table Chip conveyor Coolant Service tools etc.

Key data: 660 , 660 , 660

CNC controller: SIEMENS 840Di Axes X-axis travel mm: 660 Y-axis travel mm: 660 Z-axis travel mm: 660 B-axis degrees: 360º (0,001º) Feed rates m/min: 60 Rapid traverse m/min: 60 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø700x850 Max. workpiece weight kg: 400 Spindle Spindle speed rpm: 40 - 12.000 Cooling Cooling through the Spindle Center bar: 70 Tank capacity: 1.400 Tool system Tool holder: SK-40 Big+ Tool magazine slots: 360 Max. Tool Diameter With free neighboring places mm: ø150 With occupied neighboring places mm: ø80 Max. Tool Length mm: 350 Max tool weight kg: 10 Equipment Electronic Handwheel Chip conveyor Infrared probe (RENISHAW OMP60) Rotating inspection windows Rinsing gun blowing air through spindle center Signal lamp High pressure pump Tool breakag ...

Key data: 1020 mm, 550 mm, 410 mm

Matsuura MC 1000 VG, Built in 2000, Control Yaskawa J 300, Dokyjh Travel X/Y/Z 1020/550/410 mm, Tool changer 30 times, Spindle speed up to 20,000 rpm, 3D edge probe,

Longitudinal X: 550 mm Cross Y: 440 mm Vertical Z: 580 mm Positions ATC: 60   CNC Brand: Fanuc CNC Model: FANUC 16 i Large package tooling ca 100 pieces Large package pallets Large package clamping equipment Knoll filtration system Renishaw laser measuring X - Travel:               550mm Y - Travel:               440mm Z - Travel:               580mm A - Axis:                 360.000° B - Axis:                 + 65 to - 125° Table load:               60 Table  Ø:                 350mm Feed rate X-Axis:         60000mm/min. Feed rate Y-Axis:   ...

Matsuura MX-520 5 axis machining center 20.000 rpm Machine is in excellent condition X : 630 mm Y : 560 mm Z : 510 mm

Cutting hours : 1200 saat Spindle speed : 20.000 rpm Control unit : Fanuc

X: 550 Y : 410 Z : 560 15000 rpm Machine is in good condition

Vertical Machining center Manufacturer Matsuura Model RA-2F Year 1998

Technical details on demand.

working condition, equipped with: bed changer, USB readout cabinet, tool changing station (space for 30 pieces) (ATTENTION! buyer is responsible for transport and possible disassembly! no charging equipment available!), watch the video via this link: https://youtu.be/oPAWbHbI-js?si=bfZGblQzpi6Ngdcz

Table length: 760 mm Table width: 380 mm Longitudinal X: 510 mm Cross Y: 360 mm Vertical Z: 460 mm Positions ATC: 20   Positions APC: 0   CNC Brand: Yasnac CNC Model: J 300 SPECIFICATIONS X - Travel  510 mm Y - Travel   360 mm Z - Travel  460 mm Controll  Yasnac J 300 Table Length x Width  760 x 380 mm Table load in kG  400 Kg Spindle Taper  Bt 40 Spindle speeds / ranges  15.000 Rpm ATC tool changer  20 Number off controlled axis  3  

Table length: 480 mm Table width: 400 mm Longitudinal X: 550 mm Cross Y: 450 mm Vertical Z: 500 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Yasnac CNC Model: MX 3 SPECIFICATIONS X - Travel 550 mm Y - Travel  450 mm Z - Travel   500 mm bed / plano / portal / moving column  VMC Controll  YASNAC MX3 Table Length x Width  480 x 400 mm Spindle Taper Sk 40 Spindle speeds / ranges  8000 Rpm ATC tool changer 30 Number off controlled axis 3 DIMENSIONS Length  2500 mm Width  2200 mm Height  2600 mm  

Horizontal CNC machining center make MATSUURA type MC 600 H - 45Masch. -No: 870706216 Year of construction 1987Table work area: 450 x 450 mmTable longitudinal path X: 600 mmvertical travel of the headstock Y: 450 mmStander traversing Z: 480 mmTable index increment: 0.001 mmMax. Table load: 500 kgNumber of tools in the changer: 50Distance table spindle axis: 85 - 525 mmCenter of table spindle: 125 - 605 mmSpindle diameter: 80 mmSpindle mount: BT 40Spindle speed: 30 - 6000 rpm.Rapid traverse XYZ: 15000/15000/15000 mm / min.Feed rate stepless: 1 - 5000 mm / min.Drive power: AC 7.5 / 11 kWWeight: 8200 kgWith- CNC control Fanuc 11 M- Number of change tables 2- a lot of tool holders- 14461 operating hours- Chip conveyorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Err ...

Table length: 540 mm Table width: 320 mm Longitudinal X: 330 mm Cross Y: 300 mm Vertical Z: 250 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Yasnac X - Travel:     330mm Y - Travel:     300mm Z - Travel:     250mm Table Length:   540mm Table Width:    320mm Table load:     100 Feed rate X-Axis:90000mm/min. Feed rate Y-Axis:90000mm/min. Feed rate Z-Axis:90000mm/min. Spindle Taper:  30ISO/Bt/Mk Power on spindle:7.5kW Speeds / ranges:40000Rpm ATC / revolver: 30 Chip conveyor:  Yes Length:         2800mm Width:          2600mm Height:         28000mm

Table length: 400 mm Table width: 400 mm Longitudinal X: 550 mm Cross Y: 400 mm Vertical Z: 460 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Yasnac X - Travel:     550mm Y - Travel:     400mm Z - Travel:     460mm Feed rate X-Axis:30000mm/min. Feed rate Y-Axis:30000mm/min. Feed rate Z-Axis:24000mm/min. Spindle Taper:  40ISO/Bt/Mk Power on spindle:7,5kW Speeds / ranges:15000Rpm ATC / revolver: 30 Chip conveyor:  Yes Length:         2700mm Width:          2800mm Height:         2800mm Weight:         4600kg

Table length: 1150 mm Table width: 510 mm Longitudinal X: 1020 mm Cross Y: 550 mm Vertical Z: 510 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Yasnac X - Travel:     1020mm Y - Travel:     550mm Z - Travel:     510mm Table Length:   1150mm Table Width:    510mm Feed rate X-Axis:15000mm/min. Feed rate Y-Axis:15000mm/min. Feed rate Z-Axis:15000mm/min. Spindle Taper:  40ISO/Bt/Mk Power on spindle:30kW Speeds / ranges:15000Rpm ATC / revolver: 30 Chip conveyor:  yes Length:         2800mm Width:          2500mm Height:         2800mm Weight:         6800kg

Description, subject to prior sale. CNC 4-axis horizontal machining center Control: Fanuc i18-M X 450 mm Y 400 mm Z 400 mm Spindle revolution 15000 rpm 61 ATC 5 pallets 300 x 300 mm SK 40 IKZ 25-50 bar Measuring Probe Tool breakage monitoring KSS Cooling The machine is in good working condition and can be inspected working under power. Availability short-term Technical specifications, subject to error.

Description, subject to prior sale CNC 4-axis horizontal machining center Control: Fanuc/Matsuura i30 G-Tech X 500 mm Y 500 mm Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Number of pallets 5 SK40 IKZ 25-50 bar Measuring Probe Tool breakage monitoring KSS Cooling Spindle hours 11000 November 2020 - tool spindle renewed January 2021 - hydraulic aggregate renewed February 2021 - ATC retrofitted August 2021 - engine/motor pallet station renewed December 2022 - tool breakage monitoring renewed October 2023 - spindle oil cooler renewed Machine is in very good working condition. It can be inspected working under power. Technical indications, subject to error.

Description, subject to prior sale. CNC Horizontal 4-axis machining center - Y 560 mm Control: Matsuura Gtech 30i (programmable FANUC/Matsuura) X 500 mm Y 560 mm !!! Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Number of pallets 5 SK40 IKZ 25-50 bar Measuring Probe Tool breakage monitoring KSS Cooling New spindle in January 2021 New spindle in April 2023. Telescopic cover renewed in September 2023 Machine is in very good working condition. It can be inspected working under power. Technical indications, subject to error.

Matsuura FX1 for sale. Functional cnc milling maschine or for spare parts. Year 1995. Spindel 30000 rpm. With toolholders.

machine equipped with pallet changer Longitudinal travel X 510 mm Cross travel Y 360 mm Vertical travel Z 460 mm Rotary table yes Type de CNC Matsuura J 300 Table length 760 mm Table width 380 mm Maximum weight on the table 400 kg Tool magazines 20 Big plus spindle connection Maximum spindle speed 8000 rpm