used MATRA Round Table Flat Grinding Machines

grinding length:600 mm grinding width:300 mm workpiece height:450 mm total power requirement:8 kW weight of the machine ca.:2,2 t dimensions of the machine ca.:2,8 x 3,0 x 2,0 m grinding spindle speed:1440 / 2905 U/min with magnetic plate 600 x 200 mm autom. vertical feed coolant attachment

Brake drum turning and grinding machine - see pictures More: Brake jaw grinding machine SCLEDUM SC 600 see picture below

various accessories

Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit

Table length: 1000 mm Table width: 500 mm Longitudinal X: 800 mm Cross Y: 500 mm Vertical Z: 610 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Fanuc CNC Model: OM Make Matra VMC 85 Type VMC 850 A Year 2002 Fanuc OM Table length (mm)L = 1.000 Table width (mm)W = 500 Longitudinal X (mm)X = 800 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 610 Sk40 / 8.000 / 10Hp ATC 24 Positions  Chip conveyor  

Table length: 1000 mm Table width: 500 mm Longitudinal X: 800 mm Cross Y: 500 mm Vertical Z: 500 mm Positions ATC: 20   Positions APC: 0   CNC Brand: Fanuc CNC Model: OM Make Matra VMC 85 Type VMC 850 A Year 2002 vertical maching center Table length (mm) L = 1.000 Table width (mm)W = 500 Longitudinal X (mm)X = 800 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 500 Bt40 / 10.000 / 7.5 kW ATC 20 Pos / 18.000 Rapid FANUC OM- Chip conveyor - Very little used - Tooling packge  

Surface grinding machine make MATRA type MF 6 AFabr. -No: 73 159, built in 1973X-way: 600 mmZ-way: 200 mmGrinding wheel: 225 x 25 x 51 mmConnected load: 2.8 kWWeight approx : 1,4 tDimensions approx: 2500 x 1350 x 2000 mmwithout magnetic disk and cooling device!We need space!Special price from stock MörsdorfPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic single-column press make MATRA type ME 63.2Machine No: 519299Press force: 63 tOperating pressure: 200 barPiston diameter: 185 mmTable size: 700 x 600 mmOutside dimensions: 1100 x 1700 x 3200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turning pin press make MATRAPressing force: 1.5 tProjection: 200 mmInstallation height: 300 mmTable diameter: 180 mmMandrel diameter: 55 mmOutside dimensions (without base) approx: 500 x 280 x 750 mmWith- UnderframeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Capacity: 40 t Distance between uprights: 850 mm Stroke: 850 mm Day light: 850 mm Capacity Kg:           40000 Distance between column:850mm Table Length:          850mm Table Width:           400mm Table Height:          850mm Ram stroke:            400mm Approche speed:        90mm/min. Power:                 2,2kW Length:                1400mm Width:                 500mm Height:                1800mm Weight:                1000kg

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: FANUC 18iM Super CAP II total power requirement: 22/26 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 6,25 x3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bezel, steady rest, lynette -for: crankshaft grinding machine -Max. Passage: O mm -Top height: mm -Technical drawing: in the photos -Number: 1x bezel available -Price per piece -Dimensions: 380/85 / H200 mm -Weight: 4.7 kg

x-travel: 800 mm y-travel: 500 mm z-travel: 610 mm Control: Fanuc type: 18 M table surface area: 1000x500 mm Tool changer: 24 spindle taper ISO: 40 turning speeds: 8000 U/min total power requirement: kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4,2x3,3x3,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Wire EDM Machine FANUC MATRA ROBOCUT a-1iA5 Year of construction 2001 Travel: X-axis 520 mm Y-axis 370 mm U-axis 120 mm V-axis 120 mm Z-axis 310 mm Max. workpiece dimensions: 790 x 730 x 300 mm Max. workpiece weight 1,000 kg Wire diameter 0.1 to 0.3 mm Wire feed speed 250 to 2500 g Max. taper angle +/- 30°/ 80 mm Control: FANUC Series 16i-W Machine weight: approx. 2,600 kg

x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: Fanuc 18iM Super Cap II turning speeds: 60-6000 U/min tool magazin:: 60 tool taper: BT50 total power requirement: 26 kW weight of the machine ca.: 23,6 t required space: 6,3 x 3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: typ 45400000000E , nr. 003 , max 700 bar , voltage 380 V , force: 80Ton Approx. Onsite Dimension. (l x w x h): 2,200 x 700 x 1,800 mm, weight approx.: 1,600 kg

Description: Machine number 461048 , Operating pressure 80 at Max. pressing force: 4 to, Approx. Onsite Dimension. (l x w x h): 1,200 x 950 x 2,200 mm, weight approx.: 1,500 kg

Key data: 1 t, 110 mm

Hydraulic fine press, MATRA, , up to 1000kg, table: 260x200mm, projection 110, Foot or manual release, without UVV Fully functional, energized to visit

Description: CNC machining Axis X/Y/Z 1300 x 850 x 710 mm Table 1500 x 750 mm Load capacity 3300 kg Sk 50 spindle 18.5 kW and 4500 revolutions ATC 20 changer Double chip conveyor Oil cooler Shuttle table Fanuc 18-M weight approx.: 16,500 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 4,525 x 3,480 mm

NC – controlled precision rotary table surface grinding machine with horizontal grinding spindle and transverse slider - brand new Rotary table diameter 1,000 mm Largest grindable diameter 1,150 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 800 kg Circumferential grinding wheel Ø 450/203 mm x W 80 mm Highest workpiece height with new grinding spindle 700 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 14.7 kW Rotary table drive power 5 kW Torque 30 Nm Weight approx. 15,000 kg

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : roundtable / turntable diameter : 800mm / 1000mm/1200mm/1400mm/2000mm electrical : 230 VAC / on request 400V/3ph - Legs adjustable - Stainless steel construction - Speed control with frequency converter - CE confirmation - Manual and electr. draw - driven with geared motor - edge high 30mm The base frame has a support for the lift truck transport I offer this machine in NEW condition Round table in Stainless steel Ø mm Round table 800 Round table 1000 Round table 1200 Round table 1400 Round table 2000 Example fotos, with additional parts

Hydraulic rotary indexing table with face teeth FIBROTAKT Hydraulic rotary indexing table, rotary table type Y 13 630 FN3RA T6 Fabr. No. 11 136-0840 Year of construction 1981 Table diameter 630 mm Table height = height 250 mm Table passage 50 mm Switching angle 60 Hydraulic working pressure 30 bar - fixed switching step of 6 pitches - Face toothing for highest part accuracies - Hydraulic drive - Table structure with 6 hydraulic clamping devices (inner collets 90/100 mm) Space requirement table L x W x H 700 x 700 x 250 mm Space requirement with structure L x W x H 1380 x 1380 x 800 mm Weight table approx. 600 kg Weight with superstructure 1350 kg good condition; used

rotary table diameter: 1000 mm grinding height: 500 mm grinding head - power requirement: 15/5,5 kW total power requirement: 30 kW weight of the machine ca.: 18 t dimensions of the machine ca.: m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _______________________________________________________ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx.  ...

rotary table diameter: 800 mm grinding height: 1200 mm grinding head - power requirement: kW total power requirement: 30 kW weight of the machine ca.: 8500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.