We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Brake drum turning and grinding machine - see pictures More: Brake jaw grinding machine SCLEDUM SC 600 see picture below
new
used
Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit
used
Table length: 1000 mm Table width: 500 mm Longitudinal X: 800 mm Cross Y: 500 mm Vertical Z: 610 mm Positions ATC: 24 Positions APC: 0 CNC Brand: Fanuc CNC Model: OM Make Matra VMC 85 Type VMC 850 A Year 2002 Fanuc OM Table length (mm)L = 1.000 Table width (mm)W = 500 Longitudinal X (mm)X = 800 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 610 Sk40 / 8.000 / 10Hp ATC 24 Positions Chip conveyor
used
Table length: 1000 mm Table width: 500 mm Longitudinal X: 800 mm Cross Y: 500 mm Vertical Z: 500 mm Positions ATC: 20 Positions APC: 0 CNC Brand: Fanuc CNC Model: OM Make Matra VMC 85 Type VMC 850 A Year 2002 vertical maching center Table length (mm) L = 1.000 Table width (mm)W = 500 Longitudinal X (mm)X = 800 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 500 Bt40 / 10.000 / 7.5 kW ATC 20 Pos / 18.000 Rapid FANUC OM- Chip conveyor - Very little used - Tooling packge
used
Surface grinding machine make MATRA type MF 6 AFabr. -No: 73 159, built in 1973X-way: 600 mmZ-way: 200 mmGrinding wheel: 225 x 25 x 51 mmConnected load: 2.8 kWWeight approx : 1,4 tDimensions approx: 2500 x 1350 x 2000 mmwithout magnetic disk and cooling device!We need space!Special price from stock MörsdorfPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic single-column press make MATRA type ME 63.2Machine No: 519299Press force: 63 tOperating pressure: 200 barPiston diameter: 185 mmTable size: 700 x 600 mmOutside dimensions: 1100 x 1700 x 3200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Turning pin press make MATRAPressing force: 1.5 tProjection: 200 mmInstallation height: 300 mmTable diameter: 180 mmMandrel diameter: 55 mmOutside dimensions (without base) approx: 500 x 280 x 750 mmWith- UnderframeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Capacity: 40 t Distance between uprights: 850 mm Stroke: 850 mm Day light: 850 mm Capacity Kg: 40000 Distance between column:850mm Table Length: 850mm Table Width: 400mm Table Height: 850mm Ram stroke: 400mm Approche speed: 90mm/min. Power: 2,2kW Length: 1400mm Width: 500mm Height: 1800mm Weight: 1000kg
used
turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: FANUC 18iM Super CAP II total power requirement: 22/26 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 6,25 x3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Bezel, steady rest, lynette -for: crankshaft grinding machine -Max. Passage: O mm -Top height: mm -Technical drawing: in the photos -Number: 1x bezel available -Price per piece -Dimensions: 380/85 / H200 mm -Weight: 4.7 kg
used
x-travel: 800 mm y-travel: 500 mm z-travel: 610 mm Control: Fanuc type: 18 M table surface area: 1000x500 mm Tool changer: 24 spindle taper ISO: 40 turning speeds: 8000 U/min total power requirement: kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4,2x3,3x3,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC Wire EDM Machine FANUC MATRA ROBOCUT a-1iA5 Year of construction 2001 Travel: X-axis 520 mm Y-axis 370 mm U-axis 120 mm V-axis 120 mm Z-axis 310 mm Max. workpiece dimensions: 790 x 730 x 300 mm Max. workpiece weight 1,000 kg Wire diameter 0.1 to 0.3 mm Wire feed speed 250 to 2500 g Max. taper angle +/- 30°/ 80 mm Control: FANUC Series 16i-W Machine weight: approx. 2,600 kg
used
x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: Fanuc 18iM Super Cap II turning speeds: 60-6000 U/min tool magazin:: 60 tool taper: BT50 total power requirement: 26 kW weight of the machine ca.: 23,6 t required space: 6,3 x 3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Machine number 461048 , Operating pressure 80 at Max. pressing force: 4 to, Approx. Onsite Dimension. (l x w x h): 1,200 x 950 x 2,200 mm, weight approx.: 1,500 kg
used
Key data: 1 t, 110 mm
Hydraulic fine press, MATRA, , up to 1000kg, table: 260x200mm, projection 110, Foot or manual release, without UVV Fully functional, energized to visit
used
grinding length:600 mm grinding width:300 mm workpiece height:450 mm total power requirement:8 kW weight of the machine ca.:2,2 t dimensions of the machine ca.:2,8 x 3,0 x 2,0 m grinding spindle speed:1440 / 2905 U/min with magnetic plate 600 x 200 mm autom. vertical feed coolant attachment
used
-Digital display Fagor. -Accessories available. Tip height 200 mm Top width 800 mm Turning diameter over slide/bed 240/425 mm Length of the bend of the Planscheibem with 4 JAWS 180 mm Spindle bore 51 mm Inner cone 60 metric Recording camlock D6 " Speed 45-2240 Rev/min The lead screw pitch 6 mm Tailstock spindle mount MT 4 Diameter of tailstock Quill 70 mm Quill: 200 mm stroke Feeds: Along 0.05 2.8 mm / Rev Plan 0.05 2.8 mm / Rev Rapid traverse: LW Thread pitches: Metric 0.5 14 mm English 2-56 U/1 " Module 0.125 3.5 Motor 380 Volt, 12.5 HP Machine dimensions: B x T x H 2400 x 1200 x 1800 mm Weight 2100 kg
used
SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...
used
Emco Emcomat 17S Year of construction: 1999 Center height 140/280 mm Weight 725 kg Dimensions: 1650x 1060 x 1290 Speed 15- 3550 rpm
new
Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Robust, high-quality welding rotator with a load capacity of 5 tons. Diameter range: 100-3500 mm. A sustainable turning device that is ideal for welding pipes and steel tanks. Easy adjustment of the roller spacing. Includes wired remote control and foot pedal. With the built-in master-slave function, you can control several driven units synchronously. CE conformity, 1 year warranty. The price does not include VAT and transport. Depending on your wishes, we can organize the transport.
used
Technical data: Double column vertical turret lathe CNC control Siemens 802 D Weight 66 to 63 kw Dimensions 13,600 x 9,800 x 6,750 mm Faceplate diameter 3,500 mm Maximum workpiece height 2000 mm Max support adjustment 30 ° Maximum workpiece diameter 4,000 mm Maximum workpiece diameter with page support 3,750 mm Number of support 2 Max turning height 1,400 mm Maximum workpiece weight 25 to Max speed 30/min Min. speed 1/min
used
Lathe - cycle VOJUS Turntec controlled 63 bearing no 1105-02244 make VOJUS type Turntec 63 built in 1999 State second-hand machine control CNC SIEMENS 840 D storage France origin SK delivery immediately cargo base EX WORK technical details turning diameter 630 mm turning length 3000 mm control SIEMENS 840 D spindle bore 110 mm spindle speeds infinitely 2500 revs/min rapid traverse - longitudinal/plan 10/5 m / min dimensions L W H 3000 x 1800 x 1790 mm turning diameter over support 420 mm overall power demand 26 kW machine weight approx. 4,5 t description * CNC - control SIEMENS 840 D SHOP TURN * MULTI FIXED HOLDER * 1 open, revolving bezel TURNING DIAMETER OVER SLIDE 420 MM BED 6300 TURNING LENGTH 3000 MM 2500 U/MIN