Category: 503 shredders / Woodchoppers
Latest update: 12.01.2024 add to watchlist
approved
dealer
item-No.: 66208023

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 4.600 € add to watchlist

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

Category: 904 garden and communal machines
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 177954
New in: 2009

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: 2.700 € add to watchlist

Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...

Category: 1402 other machines for mechanical handling
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 185411

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 2.200 € add to watchlist

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Category: 1101 power generators
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 185415

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 8.900 € add to watchlist

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

Category: 504 sieving machines
Latest update: 23.01.2024 add to watchlist
approved
dealer
item-No.: 5856968
New in: 2023

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 5.890 € add to watchlist

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

Category: 503 shredders
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 5856924
New in: 2015

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 115.000 € add to watchlist

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

Category: 503 shredders
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 58867192
New in: 2017

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 13.300 € add to watchlist

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

Category: 503 shredders
Latest update: 19.12.2023 add to watchlist
approved
dealer
item-No.: 58872102

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 10.880 € add to watchlist

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

Category: 904 garden and communal machines
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 72506929

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 2.580 € add to watchlist

MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...

Category: 503 shredders
Latest update: 19.12.2023 add to watchlist
approved
dealer
item-No.: 131767738

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 43.900 € add to watchlist

Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 1402 other machines for mechanical handling
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 136150983
New in: 2018

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 4.880 € add to watchlist

Scratch chain conveyor MATEC For wood chip extraction -Trogwidth 300 mm -Troghheight 450 mm -Troglänge about 5500 mm -Steel sheet 4 mm -Creation below once about 65 ° -Discard height from ground about 4500 mm -single-stranded chain guide links A-A 80 mm -Conveyor slats plastic height about 130 mm -Drive snail gearbox engine electric 1.5 kW, 3x400 V, 50 Hz Weight about 1100 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 1409 pumps
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 138012949

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 9.900 € add to watchlist

MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618  ...

Category: 709 other food machines
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 160291247
New in: 2022

used

check Seller: MATEC system + technik GmbH
Location: 4900 Langenthal Land-ch
Price: 3.500 € add to watchlist

Volcanoring MATEC V.1.0 The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached ...

Category: 709 other food machines
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 160291248
New in: 2022

used

check Seller: MATEC system + technik GmbH
Location: 4900 Langenthal Land-ch
Price: 2.900 € add to watchlist

Volcanoring MATEC mini The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

Category: 709 other food machines
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 160291249
New in: 2022

used

check Seller: MATEC system + technik GmbH
Location: 4900 Langenthal Land-ch
Price: 6.600 € add to watchlist

Volcanosquare MATEC The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

Category: 206 presses / Briquetting presses
Latest update: 22.03.2024 add to watchlist
approved
dealer
item-No.: 160370687
New in: 2023

used

check Seller: MATEC system + technik GmbH
Location: Land-ch
Price: 12.600 € add to watchlist

Briquetting press MATEC F-Cube 20 new Dimension press LxWxH: 130x74x112 cm weight 233 kg Briquette square 30x30 mm Capacity approx. 10-25 kg briquettes / hour Size feed funnel approx. 0.33 m3 Motor hydraulic pump 2.2 kW, 3x 400 V, 50 Hz Electricity consumption approx. 1.1 kWh How we work Continuous operation Year of construction 2021 Additional options: - Extension line for briquettes with stand -Auto. Start-stop system for operation with level monitoring - Sensors for level monitoring - Hydraulic oil 30 liters - 3 m cable with Euro plug 16 A - Flange adjustment filter-hopper press The spec. Density of briquettes is about 900 kg / m3. The maximum wood moisture content is 15%. The measured noise level is 62 dB. New machine, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden  ...

Category: 101 boring mills and machining centers
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163669474
New in: 2012

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

There are two identical machining centers available, table dimensions: 850x530mm, number of tool slots: 48, controls: Heidenhain iTNC 530, operational hours counter machine 1/2: 37,800/36,900h, with tool magazine and documentation.

Category: 504 sieving machines
Latest update: 08.12.2023 add to watchlist
approved
dealer
item-No.: 131732140

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 25.900 € add to watchlist

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 504 sieving machines
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 136151006
New in: 2018

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 5.980 € add to watchlist

Vibrorinne MATEC drive rear Overtime separation and â?? repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 209 other wood working machines
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 136151020
New in: 2018

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 3.320 € add to watchlist

Magnetic drum MATEC For iron capture Length about 400 mm Drive about 0.37 kW Gearbox engine with tin slide Weight about 150 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 103 milling machines / Travelling column milling machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 156885099
New in: 2000

used

check Seller: WeMa A. Pigge GmbH
Location: ab Standort Land-de

add to watchlist

x-travel: 3000 mm y-travel: 600 mm z-travel: 800 mm Control: Heidenhain TNC 426 tool changer for ... units: 48 turning speeds: 9000 U/min feed: 3000 mm/min rapid traverse: 30 m/min total power requirement: 15 kW svivel milling head inner cooling center with coolant system: 20 bar full encapsulation hydraulical clamping 4 circuit, 400 bar side loading door The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 161241508

used

Location: Land-nl

add to watchlist

Table length: 3500 mm Table width: 800 mm Longitudinal X: 3000 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 36   Positions APC: 0   CNC Brand: Siemens 5-axis CNC machine (VMC)MATEC - 30 HV SEMPUCO Roatry table Renishaw RMP 60 Renishaw RMI Integrated hydraulic connection for machine vices Working Hours 11.892 H Chip conveyor Filtration & Coolant system X - Travel:               3000mm Y - Travel:               800mm Z - Travel:               800mm A - Axis:                 - 105 to + 105° B - Axis:                 360000° Table Length:             3500mm Table Width:             ...

Category: 1405 cranes
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 157046568
New in: 2015

used

check Seller: MATEC system+technik GmbH
Location: Land-ch
Price: VB 1.500 € add to watchlist

Power fork with spring compensation for long goods or pallets payload 2500 kg Fork length 800 mm Year of construction 2015 Position of the forks according to customer requirements The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Category: 101 boring mills and machining centers / Other Machining Centres
Latest update: 20.11.2023 add to watchlist
approved
dealer
item-No.: 161463905
New in: 2000

used

check Seller: ENGINEX KOSICE
Location: 040 0 Kosice Land-sk

add to watchlist

CNC Vertical Machining center MATEC 30 L, control system Heidenhain

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 19.03.2024 add to watchlist
approved
dealer
item-No.: 158896945
New in: 2007

used

check Seller: Mamach Machinehandel BV
Location: 4761 Zevenbergen Land-nl

add to watchlist

Matec 50 HV/NC 5-Axis (Traveling Column) CNC Vertical Machining Center Table size 1150 x 510 mm. NC rotary table (integrated) 1000 mm Travel X-axis 4000 mm. Travel Y-axis 1000 mm. Travel Z-axis 1300 mm. Number of tool places 48 pieces. Maximum speed of the working spindle 8,000 rpm. Tool holder HSK 100 A CNC control Heidenhain i TNC 530 If you have any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
MATEC 3rd category level
  • MATEC briquetting presses (1)
  • MATEC numerically controlled machining centres (1)
  • MATEC other machining centres (1)
  • MATEC packer (1)
  • MATEC processing centers (2)
  • MATEC travelling column milling machines (2)
  • MATEC universal processing centres (1)
  • MATEC vertical numerically controlled machining centres (1)
  • MATEC woodchoppers (1)
 
RESALE used machinery 25 years online