used MAM Blown film lines

Biopsy device for removal of tissue during mammography As good as new. - Mammography

MAMAMTA WIN 305 foil bag sealing machine Technical condition (on a scale of 1-10): 10 Year of manufacture 2018. 0 production mileage. Status - after startup. Possibility of testing.

* General * SKU300P655 * LocationBarneveld * MakeMambretti Milano (IT) * No.1045 * Year of construction+/- 1975 * Pressure * Vacuum possiblecheck * Main Features * MaterialStainless steel * Volume100 Ltr. * Motor1 KW * Specified Features - Processing vessel * MaterialStainless steel * Closed stirring vesselcheck * Capacity100 Ltr * Vessel sizesdia.450mm x600mm * Dished bottomcheck * Slope bottomcheck * Flat top sidecheck * With covercheck * Top connectionswith funnel dia.200mm * OutletEmpty by tilting * With jacketcheck * With gate type stirrercheck * Motor0,5/1,0 KW, 380-420 Volt * Speed mixing shaft23/46 rpm * With homogenisercheck * Motor1,0/4,0 KW, 380-420 Volt * Information * With switchgearcheck * Floorspace1,8x1,4 M * Total height2,4 M * Weight900 KG * Extra SpecificationsHeight cover hydraulic adjustable cover, system with hydraulic unit, motor 0.75 KW, 230/400 volt, Working pres ...

Gottfert blown film extraction unit

Key data: 75 mm, 24

Blown film extruder for mono films TOP version Manufacturer Alpine BJ 1989 has already been partially modernized. Screw length 24d Screw diameter 75mm Blowing head BF 14-36 internal cooling from Alpine Cooling ring HK 300 with peak Output approx. 175 kg depending on the product Film thickness 12my – 50my Dosing Dosing unit with 4 volumetric feeders Winder Kuhne 1300mm Tandem Pre-treatment available 1 time Slotting device is available Flat laying 840mm – 1200mm Thickness measurement is available

See PDF attached

Line includes (1) Material Dosing Iveca (2) Extruder Windmöller & Hölscher (3) Blow Head Windmöller & Hölscher (4) Die Windmöller & Hölscher, diameter: 200mm (5) Film Cooling Windmöller & Hölscher (6) Calibration Basket Windmöller & Hölsche (7) Flat-Lay Unit Windmöller & Hölscher (8) Haul-Off Windmöller & Hölscher (9) Winder Svend Knudsen (10) steel construction, operational hours counter: ca. 7000h, with documentation, the line was only used for testing purposes.

Complete Working Melt Blown Plant Consisting of: 1 Mm 65 Extruder With 6 Heating Zones 1 Extruder Head 1 Vacuum charger 1 carpet and carpet turner 1 Reel With Meter Counter And Material Cutting 1 Electrostatic Load Control Unit And 2 Electrostatic Bars 1 Air Compressor 22kw + Soundproofing Cage 3 Dies Holes 0,20 Miss 600 Mm 1 Pyrolysis Oven X Die Cleaning 1 Ultrasonic Tank For Die Cleaning 1 Aspirator Behind The Mat For Melt Blown Formation 1 Complete System With Suction Hood And Pipes

Interplast GRAMEGNA brand that for over half a century has been operating on the heat-shrinking machinery market and is well known for the high quality and reliability of its machines. We sell our R-700 type shrink wrapping packaging machine. The equipment is in excellent condition. The machine has only been stored since the end of 2004. In 2004, we stopped producing soft drinks. We did not sell the machine because we planned to restart the activity. There are electrical drawings for it. Production capacity: nominal 20-25 packages actual 21-23 packets/min For 2 liter bottles, from the 4×2 format, according to a preliminary estimate, approx. 21 packages/minute. The machine consists of the following main units: 1 intro conveyor belt with bottle sorter for arranging bottles arriving in one row into several rows for bottles with round and square cross-sections 1 x Champion 4 HS- ...

Interplast GRAMEGNA brand that for over half a century has been operating on the heat-shrinking machinery market and is well known for the high quality and reliability of its machines. We sell our R-700 type shrink wrapping packaging machine. The equipment is in excellent condition. The machine has only been stored since the end of 2004. In 2004, we stopped producing soft drinks. We did not sell the machine because we planned to restart the activity. There are electrical drawings for it. Production capacity: nominal 20-25 packages actual 21-23 packets/min For 2 liter bottles, from the 4×2 format, according to a preliminary estimate, approx. 21 packages/minute. The machine consists of the following main units: 1 intro conveyor belt with bottle sorter for arranging bottles arriving in one row into several rows for bottles with round and square cross-sections 1 x Champion 4 HS- ...

Interplast GRAMEGNA brand that for over half a century has been operating on the heat-shrinking machinery market and is well known for the high quality and reliability of its machines. We sell our R-700 type shrink wrapping packaging machine. The equipment is in excellent condition. The machine has only been stored since the end of 2004. In 2004, we stopped producing soft drinks. We did not sell the machine because we planned to restart the activity. There are electrical drawings for it. Production capacity: nominal 20-25 packages actual 21-23 packets/min For 2 liter bottles, from the 4×2 format, according to a preliminary estimate, approx. 21 packages/minute. The machine consists of the following main units: 1 intro conveyor belt with bottle sorter for arranging bottles arriving in one row into several rows for bottles with round and square cross-sections 1 x Champion 4 HS- ...

Multivac film unwinding device, film width: 420 mm, total dimensions: 1400 mm x 900 mm x 750 mm.

1987, CAP.: 75,000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4.0 M, 2-ND LINE: CAP.: 30,000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; COIL WEIGHT: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,

Used Conveyors as needed and at your Layout with Motors, Curves, etc.

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

Description: Extruder Müller ELK 60-28 Manufacturer: Müller Type: ELK 60-28 Year of construction: 1995 Condition: very good Type of offer: second-hand machine Location: D - North Rhine-Westphalia Technical data: Müller extruder machine 40,000 h Runhour type: ELK 60-28, profile extruder control:-year: 1995 injection unit screw diameter mm: 60 other ELK 60-28 d 57 KW

Qty. 2 Second-hand pickling lines Mfc.: Sundwig Built: 1968 Tank of clean HCl: 50 m³ Tank for dirty HCl: 50 m³ Strip width: 1525 mm Qty. 3 Tanks interconnected one for each bath 3*10 m³ Qty. 3 Baths HCl 15*2.5 m Double bath pre-washing water Bath for final water washing Heater Chimney for taking out the acid vapors Acid pumps Auxiliary pumps Leveling machine Mfc.: AEG-EMG Built: Oiling machine Mfc.: Sundwig Built: Coiler Mfc.: Sundwig Built:

Hard PVC pipe extrusion plant for tubes D28/D30/D33, consisting of: Battenfeldextruder B45-24 d, ESDE tube crosshead K 010, vacuum calibration with water bath, Graewe-band trigger BA63, Graewe Abstech-and at chamfer machine STS50, various sleeves, cores, calibrations and jaws, as well as additional tube crosshead Battenfeld RS 8-40

Calender with stretching line Roll width: 450 mm Diameter of roller: 252 mm Stretching line length: 2500 mm incl. 4 GWK temperature control units, 12 kW heating capacity

Qty 1 x Berstorff 4 roll inverted L calender, serial number: 11892-907, original year 1966 (but upgraded/refurbished in 2012), Roll sizes: 850mm dia x 2440mm wide, peripherally drilled rolls (steam/high pressure hot water heating), motorised nip adjustment, cross axis, roll bending, hydraulic preload etc. 2 speed Unidrive gearbox on universal couplings, Speed setting 1: 33.7 rpm, speed setting 2: 16.85 rpm, with 98kW DC variable speed motor fitted to each roll. Operator controls renewed recently (Siemens S7 plc) Downstream equipment: Set of 5 x cooling drums Beta thickness measuring device Edge trimming unit Menzel length cutter 3 position winder Complete and in very good condition. 2 spare rolls.

Aseptic sterilizator Volume: 100 l

2 Coilhaken 1 x 9 t 1 x 1 t

Complete line of pastabox: •Formage box •Thermoformage inner bag •Remplissage pasta •Remplissages sauce •Operculage