We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
weight approx.: 1 kg, Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm
weight approx.: 1 kg, Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm
used
- German production - universal head 360" TECHNICAL PARAMETERS: - planing width 230 mm - planing height 130 mm - spindle diameter 40 mm 1 bottom spindle 5.5 kW 2 right spindle 4 kW 3 left spindle 4 kW 4 top spindle 4 kW 5 universal spindle 4 kW electric height adjustment feed on cardan shafts two types of feed speed pre-table top length 2500 mm minimum element length 350 mm connection diameter 140 mm Machine dimensions 450x170x160 cm weight ~ 1400 kg
used
Technical data/equipment: - Working width 530 mm - Strip knife shaft, 4 knives - Connection 12A, 5.6 kW, 380 V, 50 Hz - Vibration protection planer shaft cover - electr. Table height adjustment - Shaft speed 5,000 rpm
BAZ ideal for room door production with tool changer Lock box milling unit separate from the side Belt milling or drilling units on the other side incl. tools
used
Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale
Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale
used
Cutting length: 3000mm, cutting width: 1000mm, connected load: 5.5kW, weight: 795kg.
used
The machine cannot be started up at the moment, it will probably be the memory batteries of the control, including replacement control with display, an inspection is possible.
used
CNC for doors or stairs Boom machine with console table 4-axis x- axis 5000 mm Y-axis 1350 mm z- axis 450 mm a- axis 190 degrees Double occupancy at the table Machine has run little
used
– German production – year of production 1997 TECHNICAL PARAMETERS: track width 250 mm cutting height 120 mm .max. disc diameter 350 mm spindle diameter 50 mm sleeve diameter 70 mm six upper pressure rollers four rows of latches Min. material length 600 mm .max. width materials 680 mm smooth feed adjustable up to 22 m/min electric height adjustment ruler central lubrication engine power 22 kW connection diameter 150 mm machine dimensions (L/W/H) 210 / 160 / 210 cm weight 1600 kg
used
Nakamura Tome Super-Mill WY-250L CNC Multi-Axis Turning/Milling Center Age : 2012 FEATURES: FANUC 31I-A CNC CONTROL DUAL OPPOSED SPINDLES WITH C-AXIS UPPER & LOWER TURRETS WITH Y-AXIS LIVE MILLING ON BOTH TURRETS CHIP BLASTER LNS QL SERVO S3 BAR LOADER CHIP CONVEYOR SPECIFICATIONS: DISTANCE BETWEEN SPINDLES 47.24" MAXIMUM TURNING DIAMETER 8.9" MAXIMUM TURNING LENGTH 35.8" X-AXIS TRAVEL, X1/X2 6.3" / 6.5 Z-AXIS TRAVEL, Z1/Z2 35.8" BAR CAPACITY 1” MAIN SPINDLE: MAIN SPINDLE SPEED 3500RPM MAIN SPINDLE MOTOR 25 HP MAIN SPINDLE BORE 2.6" MAIN SPINDLE NOSE A2-8 C-AXIS ROTATION 0.001 DEGREE SUB-SPINDLE: SUB SPINDLE SPEED 4500RPM SUB SPINDLE BORE 2" SUB SPINDLE MOTOR 20 HP SUB-SPINDLE NOSE A2-6 C-AXIS ROTATION 0.001 DEGREE B-AXIS TRAVEL 37.2" UPPER & LOWER TURRETS: DRIVEN TOOL SPEEDS 6000RPM DRIVEN TOOL MOTOR 7.5 HP Y-AXIS MOVEMENT 4"/2" EQUIPPED WITH: FA ...
used
Carriage length: 3000 mm; Cutting width at width fence: 1100 mm; Cutting width at cut-to-length fence: 2800 mm; Cutting depth: 125 mm; Scorer: Height adjustment saw blade: handwheel; Saw blade swivel adjustment: handwheel; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 400mm; Speeds: 3200 / 4000 / 6000; Motor power: 5.5 kW; Engine braking: yes / automatic; Suction port: 80 mm and 125 mm; Machine length: 3400 mm; Machine width: 1800 mm; Weight:
used
stepless feed speed---------- Technical data ---------- Rolls: 3 pieces ; TOP! Workshop-tested & immediately ready for use
used
Maka V250 - Multi-blade saw Product name: Multi-blade saw Type: V250 Manafacture: Maka Machine number: 31209 Year of construction: 2010 Condition: used, revised and checked Technical details: - max. cutting thickness: 110 mm - Width of the transport carpet: 250 mm - min. length workpiece: 280 mm (with a special wooden pressure shoe - 1x available as a sample) - Length of the workpieces to be machined: 560 mm - Feed speed of the transport carpet: 0-36 m/min - Max. throughput width: 680 mm - Height of the work table from the floor: 780 mm - Diameter of the suction opening: 250 mm - Weight: approx. 1,700 kg Engine data: - Total power: 18 kW - Voltage: 400 V - Current: 34 A - Speed: 2,930 / 3,515 rpm Machine dimensions/set-up dimensions (L x W x H): 2,750 x 1,790 x 1,850 mm - Number of packaging units: 1 - Weight: approx. 1,700 kg standard accessory: - 1 pie ...
used
working width: 180 mm; working height: 120 mm; number of spindles: 4; Spindle configuration: unten, rechts, links, oben; motor shaft spindle down: ca. 5,5 kW; motor shaft spindle top: ca. 5,5 kW; motor shaft spindle right: ca. 5,5 kW; Motorleistung Welle left: ca. 5,5 kW; adjustment shaft down: Kurbel; adjustment shaft right: Kurbel; adjustment shaft left: Kurbel; adjustment shaft top: elektrisch; cutter heads: Wendemesser; feed speed: stufenlos; feeder pressure: Feder; power consuption: 20 kW; motorbrake: - ; weight:
used
Cutting and planing machine MAKA / Weinig • Lift table • Multi-rip saw MAKA type V350: o Year of construction: 1996 o Chain width (mm): 350 o Cutting height max. (mm): 120 o Engine power (kW): 22 o Feed rate (m/min.): 0 – 40 • Material transfer to the moulder • Moulder Weinig PFA 14/7: o Working width (mm): 140 o Shafts: 7 o 1st shaft: bottom o 2nd shaft: right o 3rd wave: left o 4th shaft: right o 5th shaft: top o 6th shaft: bottom o 7th wave: Uniwelle
used
Manufacturer: Maka, Type: STV 71, Year: ca. 1980, Control: hand, Work stations: 1, Horizontal moulding unit: 1, Motor kW: 3, Clamping hight max. mm: 120, Trench deepth max mm: 130, Lifting device: yes, Year :ca. 1980
used
Three-phase motor, electric motor, Maka milling motor -Power: 1.3 kW -Speed: 2800 rpm -Shaft: Ø 18 x 40 mm -Construction with: dovetail guide -Dimensions: 330/135/H195 mm -Weight: 15.7 kg
used
working width: 630 mm; working height: 250 mm; cutter head: Centro Fix; number of blades: 4; height adjustment: elektrisch; read out workpiece thickness: mech. counter; feed speed: variable ca. 6-18 m/min; infeed roller: steehl; outfeed roller: 2 x steehl; table roller: Ja; motor power: 7,5 kW; suction connection: 160mm; machine length: 1200mm; machine width: 1200 mm; weight: 1100kg;
used
Multi-rip saw MAKA type V350 Specifications: Chain width (mm): 350 Cutting height max. (mm): 120 Engine power (kW): 22 Feed rate (m/min.): 0 - 40
used
Number of agregats: 1 St. range L-W-H: 1.350 x 1.200 x 1.200 mm weight: 800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
working width: 1100 mm; working height: 140 mm; min. Workpiece length: height adjustment: elektrisch; read out Workpiece thickness: digital; Units: 2; 1. unit: drum unit; 2. unit: sanding pad; dedusting brush: no; power consuption: 15kW; electricity: A; connecting diameter suction: machine length: machine width: weight: 1800kg;
used
Router model OF 950 year 90
used
Vibrating chisel chiseling machine Manufacturer: MAKA Model: STV 71 Horizontal chiseling unit