We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Measuring and control ring for control of three-point internal micrometers Diameter 50mm Diameter 100mm Diameter 150mm Diameter 200mm More available
used
table length: 200 mm table width: 200 mm daylight: 200 mm Control: MAHRSOFT total power requirement: kW weight of the machine ca.: 300 kg dimensions of the machine ca.: 1000 x 1000 x 1950 mm Measuring Machine with optical-, Laser and Mechanical Feeler The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine Product: Universal length measuring instruments with a direct measuring range over the entire length of the device. Comparator with horizontal base bed (hard rock with high homogeneity and rigidity) X-axis measuring system: Incremental, high-precision Heidenhain length measuring system, 100 mm long in the measuring element incremental Heidenhain incident light measurement systems over the entire length of the base bed to the left and right of the stage in the base bed Z-axis measuring system: INCREMENTAL, high-accuracy RENISHAW length measuring system, 80 mm long Product: • Standard software 828 WIN ULM "Free Measuring" • PC evaluation unit (without monitor) • Pair of measuring brackets, immersion depth 14mm (0.55 inch) • 2 parallel clamping claws 60/20 • 2 quick-release claws • 2 measuring attachments with spherical zone • Setting gauge 2 • W ...
used
Technical data Max. diam. of external gear: 600 mm Module max.: 20 mm Module min.: 0.5 mm Table load max.: 250 kg Distance between centres (min.): 25 mm Distance between centres (max.): 500 mm Error increase: 1:: 250 1:: 500 1:: 1000 Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1000 mm Width: 1000 mm Height: 2200 mm
used
Description: Serial number: 4106660 Measuring range: up to 600 mm Incl. various accessories as shown in the photos Approx. Onsite Dimension. (l x w x h): 400 x 300 x 970 mm, weight approx.: 70 kg
used
weight of the machine ca.:3 t measurement range X =:650 mm measurement range Y =:1200 mm workpiece weight:700 kg traversing speed:200 mm/s capacity:1000 VA Design: Portal measuring center with fixed measuring table and laterally driven portal, measuring table, traverse and quill made of granite. All axes are equipped with high-precision air bearing guides. It is driven by DC servo motors. Control: 3-5 axis microcontroller with vector path control Measuring system: Incremental length measuring system, resolution 0.5 m Computer: Industrial PC, Pentium class, Windows 2000 operating system, multilingual Software: MarSoft Vision 3D multisensor 3D, measuring software
used
Camp No: G15814 Type of machine: Tooth flank test device Factory: Mahr Type: 891 S built: 1986 Technical data Evolve test machine Wheel diameter up to 600 mm Module 0.2-20 mm Power 1.2 KW Weight 1.3 to Technical data The machine is used to test: Tooth flank shape (profile shape) ' tooth direction (flank line), round deviation + surface quality on forehead wheels of all kinds Wheel diameter up to 600 mm Wheel width up to 60 mm Module 0.2 to 20 module Savenboard angle 0 to 90 ° Trouble magnification 250/500/1000 times Workpiece weight up to 100 kg Vertical adjustment 150 mm Machine dimensions (LxBxH) 1,200 x 1,200 x 1,600 mm Weight approx. 1300 kg Power requirement 1.2 KW Accessories and equipment: Scribe, div. registration paper, div. tips, takeaway intermediate rope for top increase by 200 mm, mech. Key head, teaching tooth wheel ...
used
Various threaded rings, border raven gauges, measuring rings Etc in the item
used
Measuring range of 200-250mm Original packaging
used
Upon purchase, full maintenance of the machine is carried out
used
max. wheel diameter: 400 mm gear width: NA mm max. module: 5 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manual Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. wheel diameter: 120 mm gear width: 160 mm max. module: 3 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
GEAR GAUGES Manufacturer Mahr Available for internal and external toothed involute, wedge and notch flanks Gearing teaching rings GR 20x1x18xf-LQ3 DIN5480 GR 30x2x13xa-LQ3 DIN5481 GR 35x2x16xa-LQ3 DIN5480 GR 40x2x18xa-LQ3 DIN5480 GR 45x2x21xa-LQ3 DIN5480 GR 50x2x24xa-LQ3 DIN5480 GR 60x2,5x22xf-LQ3 DIN5480 GR 21x24f DIN5481Good B45x41xe9 DIN5482 Good Gearing mandrels GD 20x1x18x9H-LQ3 DIN5480 HD 60x2,5x22x9H-LQ3 DIN5480 GD 60x2,5x22xH-LQ3 DIN5480 21x24 DIN5481 Gut-Aussch.
used
Silo Manufacturer Mahr GmbH - Plants for bulk solids Year of construction 2006 Capacity 140m³ Medium cement 1,3kN/m³ Mixing plant optional
used
Mahr 865 SE Indicator Calibrator Mahr 865 SE indicator calibrator with 1505 IC indicator + 1299 IC/S printer Height-adjustable table More indicator calibrators in other sizes - new and used - can be found in our shop! International shipping costs on request!
used
voltage: 220 V weight of the machine ca.: 0,260 t dimensions of the machine ca.: 1,20 x 0,45 x 1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 999999 mm y-travel: 999999 mm z-travel: 999999 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Im Kundenauftrag: Die Maschine wurde 2015 von uns aus einem Vorführraum der Fa. Mahr gekauft und ist Baujahr 2013. Das Meßgerät war bei uns so gut wie nicht im Einsatz (deswegen auch keine aktuelle Kalibrierung) da das fertigungsbegleitende Messen zu aufwendig war. Die Hardware der Maschine ist in einem neuwertigen Zustand. Die Software arbeitet einwandfrei (Windows 7). Ein kompletter Tastersatz, sowie ein neuer Default-Taster ist mit dabei. Die Maschine arbeitet vollautomatisch. Man kann alle Form- und Lagetoleranzen sowie Konturen messen. Die Maschine steht auf einer aktiv schwingungsisolierten (Druckluftdämpfung) Granitplatte. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Micrometer, micrometer screw, measurement of tooth width, plate measuring surfaces -Measuring range: 50-75 mm -One revolution of the drum corresponds to: 0.5 mm -without locking device -large measuring areas -Measuring force: ratchet -Including: case -Setting mass -Hand protection -Number: other sizes available -Weight: 0.7 kg
used
Lever gauge, dial gauge, probe, probe, centering device -Manufacturer: Mahr, Millimess dial gauge -Measurement range: 0-50 µm -Reading accuracy: 0.001 mm -Dimensions case: 110/80/H20 mm -Weight: 0.2 kg
used
Outside micrometers, micrometer screw, outside micrometer -Manufacturer: Mahr, outside micrometer -Measuring range: 225-250mm -Reading: 0.01mm -Locking device -other sizes: also available -Dimensions box: 400/230/H30 mm -Weight: 2,2 kg
used
Gauge block box, gauge blocks, gauge block boxes, parallel gauge block set -Manufacturer: Carl Mahr, gauge block set of parallel gauge blocks, 46 pieces -Final dimensions: 1.0 - 100 mm -Measurement accuracy: Accuracy grade I -Dimensions box: 370/120/H60 mm -Weight: 2.8 kg
used
Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 630 mm -Width: 630 mm -Height: 130 mm -Plate thickness: 30 mm -with support ribs -Weight: 121 kg
used
MAHR GMX 275 CNC GEAR TESTING MACHINE
used
Description: 75-100 mm Approx. Onsite Dimension. (l x w x h): 245 x 135 x 30 mm, weight approx.: 1 kg
used
Description: '- Consisting of 2 pieces - Digital' Approx. Onsite Dimension. (l x w x h): 70 x 50 x 50 mm, weight approx.: 3 kg