We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
MADO Selekta bandsaw
MADO Perfekta-plus MKB 649 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
used
MADO used Selekta bone bandsaw Machine runs loud, and therefore has no brake at a bargain price before use the machine must be cleaned thoroughly
used
Bandsaw Mado Dimensions: 70x75x170CM Electrical power: 3 KW
used
We sell here a bone saw from the manufacturer Mado, type MKB 649 in a very good used and functional condition. The machine runs on 400 volts, 1.1 kW, completely stainless steel, workshop tested, immediately ready for use, dimensions W/D/H 55/55/70 cm, more on request.
used
MADO MEW 620 Automatic Grinder, performance 1400kg/h, bowl capacity 35kg, stainless steel construction, Unger Cutting System reduces handling and minimizes heat rise. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
used
MADO MSM 764 SUPRA 50 M, 50 Liters bowl cutter, 2 knife speeds, mixing speed forward and reverse, 2 bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.
used
Type Grinders / Mincers Height 1580 Width 980 mm Length 1100 mm Voltage Electrical: 400V 50Hz 3N Installed Power 4 kw Main material Stainlees Steel Time of realisation 2-3 weeks Throat Diameter mm Grinder Type Feeding System Hooper
used
MADO MSM 765 SL SUPRA 70, 70 liters bowl cutter, two bowl speeds, mixing speeds, knife head with 6 knives, refurbished
used
Ground meat portionning line Mado Category Used meat processing machines Subcategory Lines Type Lines Height 950 Width 1100 mm Length 2700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel
used
MADORA SB 1300X2500 aluminium grinding machine was built in 2018 in Poland. A highly reliable machine designed for a wide range of finishing operations i.e. deburring and edge rounding, achieves excellent machining results on the entire surface of the ground workpiece. For surface finishing of workpieces with a maximum thickness of 50 mm, the machine uses a 1300 mm wide technical fleece cylindrical grinding wheel with adjustable oscillation. The SB 1300X2500 aluminium sheet grinding machine is operated via a TFT control panel, which allows, among others, to adjust the machining thickness and change the feed speed of the gantry. The total weight of the machine is 2870 kg. Technical data of the MADORA SB 1300X2500 deburring machine - work table surface (L x W): 2500 x 1300 mm - maximum workpiece thickness: 50 mm - minimum workpiece thickness: 0.5 mm - feed rate: 0,5-2 m/min - numbe ...
used
mobile, equipped with various press moulds, 2x auger, hopper size 500x550 mm, foot control
used
Bone saw Mado Perfekta Plus MKB 649 in a very good used and functional condition. Completely made of stainless steel. Table-top unit, dimensions W/D/H 55/55/90 cm. Connected values 400 volts, 1.1 kW. Workshop tested, immediately ready for use. More on request.
used
Throughput depending on material type, speed, and cutting set Capacity: up to 1.600 kg/h Main motor power: 5.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 100 Lenght: 70 Height: 210 Delivery time: 10 working days after advanced payment
used
Meat grinder Mado Optimo 2, type MEW 624, 114 stuffing grinder, Machine in stainless steel, 2 speeds, Removable screw housing, with reverse operation, Connection 400V, 6kW, year of construction 2008, Dimensions LxWxH approx. 107x72x115cm, weight approx. 247kg, good used condition, fully functional
used
MADO MEW 725 automatic grinder, including lifting device, two feeding worms, one working worm, cutting set Unger 5 pcs., including key for the removal of the working worm
used
Meat grinder, make Mado, type Optima, built in 2014, Dimensions of filling bowl: L x W: 740 x 550 mm,, Electrical connection values: 5.6 kW,, power: Machine cycle: 15 - 40 seconds, Dimensions / weight: (WxLxH): 820 x 900 x 1070 mm, 227 kg
used
Mado knife sharpener, type: MNS 650, number: 1537703, 230/400 V, 3 Ph, 50 Hz, 1.7/1 A, 0.5 kW, dimensions: 550 mm x 350 mm x 320 mm.
new
Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base
new
Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...
used
Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.
used
Used Metal Band Saw Internal machine number m3278 Manufacturer PEHAKA Type SM 4 Year of construction unknown Cutting width approx. 380 mm Total height approx. 1.95 m 2 Cutting speeds Table size approx. 625 x 480 mm Weight: approx. 350 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out under power. We will be happy to send you further photos by e-mail. A forklift/crane for loading is available. Prior sale is reserved. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data.B, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk t ...
new
BEKA-MAK BANDSAW TYPE BMSY-230 DGH -Half car mate -Hydraulic -2 Snelheden -Verstek Dubbel -Instelbaar Zaagdruk hydraulic -Koeling -Zaagblad 2730 x 27 x 0,9 mm -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
ADAL BANDSAW TYPE HB 250 C. -2 Snelheden -Verstek Dubbel -Zaagdruk hydraulic regelbaar -Snelspanklem -Koeling -Afslag automatic -Zaagblad 2915 x 0.9 x 27 mm -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
BAND SAW 260 G-TYPE BS -2 Snelheden -Ver STeK -Zaagdruk hydraulic regelbaar -Snelspanklem -Koeling -Afslag automatic -Zaagblad 2455 x 0.9 x 27 mm -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)