Category: 102 lathes / Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
Latest update: 03.10.2023 add to watchlist
approved
dealer
item-No.: 160370695
New in: 2001

used

check Seller: WMH24
Location: 73563 Mögglingen Land-de

add to watchlist

Turning diameter over bed 490 mm Center width 1500 mm Spindle bore 63 mm Spindle speed 2240 min-1 Chuck diameter 250 mm 2 x Bezel Tailstock Multifix

Category: 1300 other machines and plants
Latest update: 07.09.2020 add to watchlist
approved
dealer
item-No.: 130070634

used

check Seller: Vertriebsbüro Süd
Location: 86825 Bad Wörishofen Land-de

add to watchlist

1. driveway gate, new, (total length: 7,200 mm), single / self-supporting, clear opening width: 5000 mm x height: 1,500 mm, material: frame rectangular tubes and bars in square tube in statically sufficient dimensioning, 1 post with base plate and 4 Holes, height: 1,500 mm, incl. mounting material and Foundation plan, closing direction / driveway right or left (seen from outside), surface: hot-dip galvanized, item location: ex works, self assembly. Price: On request! Freight cost: On request! Other dimensions, coatings and mounting types on request. Delivery time: approx. 6-10 weeks) depending on the season)!

Category: 204 grinding machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156641559

new

check Seller: Gebr. Engelfried oHG
Location: ab Werk Land-de

add to watchlist

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 204 grinding machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156645522

new

check Seller: Gebr. Engelfried oHG
Location: ab Werk Land-de

add to watchlist

Number of sanding units: 2 St. sanding width: 290 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 204 grinding machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156645527

new

check Seller: Gebr. Engelfried oHG
Location: ab Werk Land-de

add to watchlist

Number of sanding units: 2 st. sanding width: 390 mm Sanding height max.: 390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 204 grinding machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156645531

new

check Seller: Gebr. Engelfried oHG
Location: ab Werk Land-de

add to watchlist

Number of sanding units: 2 St sanding width: 190 mm Sanding height max.: 2 - 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 204 grinding machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156795812

new

check Seller: Gebr. Engelfried oHG
Location: ab Werk Land-de

add to watchlist

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 204 grinding machines / Grinding machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794904

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Edge sanding machine make LÖWER type KS 225Machine -No: 1931 built in 1988Technical specifications:Sanding belt width: 150 mmSanding belt length: 2250 mmWork surface: 150 x 800 mmBelt speed: 16 m / sec.Tape roll diameter: 110 mmDrive power: 1.1 kWWeight: 77 kgExternal dimensions approx .: 1300 x 400 x 1000 mmWith- swiveling sanding table- tiltable tableused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 1300 other machines and plants
Latest update: 07.09.2020 add to watchlist
approved
dealer
item-No.: 130070636

used

check Seller: Vertriebsbüro Süd
Location: 86825 Bad Wörishofen, Vertriebsbüro S Land-de

add to watchlist

1 courtyard entrance / gate, new, manually drive can be manually push, there is a need but a certain force adult (total length: 7,200 mm), single / self-supporting, clear opening width: 5000 mm x height: 1,500 mm, material: frame Rectangle tube and lattice mats filling in static adequate dimensioning, 1 post with base plate and 4 holes, height: 1,500 mm, incl. mounting material and Foundation plan, gate is on closing direction / driveway right bolted to the Foundation, or left (seen from outside), surface: hot-dip galvanized, item location: ex works, self assembly. Price: On request! Freight cost: On request! Other dimensions, coatings and mounting types on request. Delivery time: Approx. 6-10 weeks (depending on the season)!

Category: 1300 other machines and plants
Latest update: 07.09.2020 add to watchlist
approved
dealer
item-No.: 130070638

used

check Seller: Vertriebsbüro Süd
Location: 86825 Bad Wörishofen Land-de

add to watchlist

1 courtyard entrance / gate, new, manually drive can be manually push, there is a need but a certain force adult (total length: 9,500 mm), single / self-supporting, clear opening width: 7.000 mm x height: 1,950 mm, material: frame Rectangle tube and lattice mats filling in static adequate dimensioning, 1 post with base plate and 4 holes, height: 1,950 mm, incl. mounting material and Foundation plan, gate is on closing direction / driveway right bolted to the Foundation, or left (seen from outside), surface: hot-dip galvanized, item location: ex works, self assembly. Price: On request! Freight cost: On request! Other dimensions, coatings and mounting types on request. Delivery time: Approx. 6-10 weeks (depending on the season)!

Category: 1300 other machines and plants
Latest update: 07.09.2020 add to watchlist
approved
dealer
item-No.: 130070640

used

check Seller: Vertriebsbüro Süd
Location: 86825 Bad Wörishofen, Vertriebsbüro S Land-de

add to watchlist

1 courtyard entrance / gate, new, drive with dead-man switch Gates suitable for up to 10 meters ICARO NF PROX - 230 V AC 750 Watt - 9 m / min continuous operation dead man control, optional radio control only with pressure bar package,(Gesamtlänge: CA. 9.500 mm), single / self-supporting, clear opening width: 7.000 mm x height: 1,950 mm, material: frame Rectangle tube and lattice mats filling in static adequate dimensioning, 1 post with base plate and 4 holes, height: 1,950 mm, incl. mounting material and Foundation plan, gate is on closing direction / driveway bolted to the Foundation, right or left (seen from outside), surface: hot-dip galvanized, item location: ex works, self assembly. Price: On request! Freight cost: On request! Other dimensions, coatings and mounting types on request. Delivery time: Approx. 6-10 weeks (depending on the season)!

Category: 1300 other machines and plants
Latest update: 07.09.2020 add to watchlist
approved
dealer
item-No.: 130075477

used

check Seller: Vertriebsbüro Süd
Location: 86825 Bad Wörishofen, Vertriebsbüro S Land-de

add to watchlist

1. driveway gate, (total width: 5,000 mm), double sashed, clearance: approx. 4,700 mm x height: 1,500 mm, material: rectangular tubes and bars in square tube, the frame has hinge 90 ° (in sufficient static version), 2 posts, square tube, length: approx. 2,200 mm (to the concrete), including, tubular frame lock, prepared for profile cylinder with floor beams and ground sleeve. Surface: hot-dip galvanized, item location: ex works, self assembly. Price: On request! Freight cost: On request! Other dimensions, coatings and mounting types on request. Delivery time: Approx. 6-10 weeks (depending on the season)!

Category: 1300 other machines and plants
Latest update: 07.09.2020 add to watchlist
approved
dealer
item-No.: 130075486

used

check Seller: Vertriebsbüro Süd
Location: 86825 Bad Wörishofen, Vertriebsbüro S Land-de

add to watchlist

1. driveway gate, (total width: 5,000 mm), double sashed, clearance: approx. 4,700 mm x height: 1,500 mm, material: rectangular tubes and bars in square tube, the frame has hinge 90 ° (in sufficient static version), 2 posts, square tube, length: approx. 2,200 mm (to the concrete), including, tubular frame lock, prepared for profile cylinder with floor beams and ground sleeve. Surface: hot-dip galvanized, item location: ex works, self assembly. Price: On request! Freight cost: On request! Other dimensions, coatings and mounting types on request. Delivery time: Approx. 6-10 weeks (depending on the season)!

Category: 210 window production machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156641535

new

check Seller: Gebr. Engelfried oHG
Location: ab Werk Land-de

add to watchlist

Table dimensions: 1000,400 mm pneumatic clamping: 2 St. moveable: Option For quick pressing of Minizinken- or Soflineverbindungen - Independent of the angle - Particularly suitable for arched manufacturing in window - Table size 1000 x 400 mm - Pneumatic connector 10 bar - Air consumption: 0.5 cdm / stroke - Two clamping cylinders for workpiece clamping - Right half of the table stored on hardened shafts via linear ball bearings - 1 pressure cylinders for linear displacement table - CE - execution (technical data according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 204 grinding machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156645535

new

check Seller: Gebr. Engelfried oHG
Location: ab Werk Land-de

add to watchlist

Number of sanding units: 8 st. sanding width: 180 (260) mm Sanding height max.: 160 mm Dimensions (L/W/H): 3065x1600x1900 mm weight of the machine ca.: 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 210 window production machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156795813

new

check Seller: Gebr. Engelfried oHG
Location: ab Werk Land-de

add to watchlist

Table dimensions: 1000,400 mm pneumatic clamping: 4 St. moveable: Option For fast compression of Minizinken- or Softline compounds especially for larger cross-sections - Independent of the angle - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 204 grinding machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156795815

new

check Seller: Gebr. Engelfried oHG
Location: ab Werk Land-de

add to watchlist

Number of sanding units: 2 St. sanding width: 190 mm Sanding height max.: 2-180 mm LÖWER-Doppelseitige Schleifmaschine DSM 2000 Doppelseitige Einzelholzschleifmaschine zum Schleifen von Massivholz wie z.B. Fensterhölzern etc. Stabile Top-Aus- führung mit langen Gußtischen, Bürst- und Finisheinrichtung und Transportbandvorschub. Geeignet für hohe Dauerbelastung auch bei höheren Spanabnahmen. - versetzt angeordnete Schleif- und Finishaggregate oben und unten - direkt angetriebene gummierte Schleifrollen für schlupffreie Kraftübertragung - Kombischliff über Rolle und Schuh für hohe Spanabnahmen bei gleichzeitig ebener Eingriffszone - wartungs- und verschleißfreie CERMET-beschichtete Schleifschuhe mit sehr guter Wärmeleitfähigkeit und absoluter Maßhaltigkeit - Fremdkühlung der Schleifzonen für einen kühleren Schliff und höhere Schleifbandstandzeiten - zwangsgeführte pneu ...

Category: 204 grinding machines / Belt grinders
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 157712609
New in: 2008

used

check Seller: Gebr. Engelfried oHG
Location: Oberkochen Land-de

add to watchlist

Number of sanding units: 8 st. sanding width: 150 mm Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 -------------------------------------------------- ------------------- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area ...

Category: 210 window production machines / Grinding machines for wood windows
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 161776791
New in: 1995

used

check Seller: DH Maschinenhandel
Location: 32609 Hüllhorst Land-de

add to watchlist

Single-roll grinding machine/flattender model LZ 2 year of manufacture 95

Category: 204 grinding machines / Grinding machines
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 162940777

used

check Seller: fwb-Maschinenhandel GmbH
Location: Land-de

add to watchlist

Grinding machine Löwer ESM 300 Built in 1987 Grinding width 290 mm Sanding belt width 300 mm Oscillating abrasive belt Usable height 120 mm Abrasive belt length 1800 mm Table length 1200 mm With support rail Support rail length 3000 mm Feed speed 3/6/12 m/min. Motor power drive motor 7.5 kW Air connection 6 bar Brush unit in the outlet The abrasive belt is guided over three rollers. Between the two lower rollers is the sanding pad. To get a clean cut, the front lower roller has been rubberized. She takes care of the pre-grinding, and the sanding pad behind it the finishing touches. Weight 798 kg with pallet Dimensions with support rail 3000 mm x 1200 mm x H 1700 mm Dimensions without support rail 1300 mm x 950 mm x H 1700 mm

Category: 204 grinding machines / Belt grinders
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163163697
New in: 2016

used

check Seller: Gebr. Engelfried oHG
Location: Deutschland Land-de

add to watchlist

Working width: 300 mm Number of sanding units: 6 st. Workpiece thickness max.: 8-230 mm Weight: 3100 kg Löwer double-sided grinding machine DSM 3304 GDR --------------------------------- Manufacturer short description: Double-sided single wood sander for sanding of solid wood such as window wood or Furniture components made of MDF etc. Stable top design with electronic articulated pressure shoes for fine grinding well-planed or veneered surfaces. Sanding units arranged one after the other Fine grinding, disc aggregates for defibering grinding, Cleaning brush, from above and below as follows: 1. Belt sanding unit with articulated pressure shoe 2. Belt sanding unit with articulated pressure shoe 3. Disc unit with brush sanding flaps diameter 320mm 4. Cleaning brush with Tempicofibre trim diameter 120mm --------------------------------- detailed long text of the manufacturers description a ...

Category: 204 grinding machines / Ledge grinding machines
Latest update: 12.02.2024 add to watchlist
approved
dealer
item-No.: 163347071
New in: 1991

used

check Seller: DH Maschinenhandel
Location: 32609 Hüllhorst Land-de

add to watchlist

Abrasive belt width 200 mm Grinding width 190 mm Sanding belt length 1600 mm Maximum grinding thickness 120 mm Motor power 5.5 kW Grinding motor speed 2,870 rpm. Abrasive belt speed 1,300 m/min. Oscillating abrasive belt

Category: 204 grinding machines / Grinding machines
Latest update: 12.02.2024 add to watchlist
approved
dealer
item-No.: 163347072
New in: 1981

used

check Seller: DH Maschinenhandel
Location: 32609 Hüllhorst Land-de

add to watchlist

used Löwer belt sander RSM 2800 SX Grinding width approx. 200 mm Grinding height approx. 120 mm Belt length approx. 1600 mm Belt width approx. 200 mm

Category: 204 grinding machines / Belt grinders
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163489973

used

check Seller: Gebr. Engelfried oHG
Location: Oberkochen

add to watchlist

Number of sanding units: 8 st. sanding width: 180 (260) mm Sanding height max.: 160 mm Dimensions (length / width): 3065x1600x1900 mm weight of the machine ca.: 1500 kg Löwer Leistomad SD Window single wood intermediate sanding machine --------------------------------- Machine factory tested by Löwer! Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above 0.75kW, - 1 slat roller unit L=200mm above 0.75kW - 1 soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit L=200mm below 0.75kW, - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - Linear guidance of all grinding uni ...

Category: 204 grinding machines
Latest update: 03.03.2024 add to watchlist
approved
dealer
item-No.: 163497862
New in: 2012

used

check Seller: Passform Holztechnik GmbH
Location: 32584 Löhne Land-de

add to watchlist

Timber construction sander Make: Löwer Model: HBS 400 UB Year: 2012 Grinding width: 390mm Grinding height: 400mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
LÖW 3rd category level
  • LÖW engine lathes (sliding, surfacing and screw cutting lathes) (1)
 
RESALE used machinery 25 years online