used LEISTRITZ Extruders

Key data: 130 mm, 35 , 600 U/min

Material: PE, PP, PS, ABS Details: DC motor, segmented screws and barrels, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors. Control cabinet for heating and motor control (NEW. Siemens S7) Screw Ø: 2x 130 mm L/D: 35:1 Motor: 500 kW (DC) Optional: side feeding, screen changer, GALA underwater pelletizing

* General * SKU231U203 * LocationBarneveld * MakeLeistritz * TypeSZE-50 GL * Mach.No.94.91.2168/7 * Main Features * Motor52 KW * Inlet diameter49.7 mm * L/D42 * Specified Features - Double screw extruder * Double screw extrudercheck * Number of hours31783 * Screw diameter49,7 mm * L/D42 * Co-rotatingcheck * Number of heating zones:9 * Electric heating33 kW * Water coolingtype: ZIK - (Zylinder Intensiv Kühlung, eng. Barrel intensive cooling) * DC-motor46 kW, 460 Volt * AC-motorside dosing screw of the extruder: 1,5 kW 230-400 Volt * Screw speedmax. 400 rpm * MaterialNitriding Steel 1.8550 * Information * Year of construction1994 * Sizes switchgearcheck(as is) * Total height1,9 m * CEcheck * Floorspace4,26x0,80 m * Weight2000 * Extra Specificationspower cabinet dimention: 2,26x0,62x2,2 mDouble screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect  ...

* General * SKU011C013 * LocationBarneveld * MakeLeistritz * TypeZSE-110 * Year of construction1986 * Main Features * Motor110 KW * Inlet diameter110 mm * L/D20 * Specified Features - Double screw extruder * Double screw extruder(1x) * Screw diameter110mm * L/D20 * Counter rotatingcheck * Number of heating zones:4 * Electric heatingcheck * DC-motor10-110 KW * Information * Mach.No.86.02.1822 * With switchgearcheck * Sizes switchgear120x70x230 CM * Floorspace4,7x1,4 M * Total height2,2 MDouble screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)

URGENT, Machine on pallet ready to be loaded, in production from 2008 to 2018 for plasticized PVC formulations

Material: PE, PP, PS, ABS // Details: Screw diameter 2x 50 mm, L/D 32, DC motor 52 kW, Runner, segmented screws and cylinders, degassing, vacuum pump, screw speed: 400 rpm, strand nozzle, water bath, strand granulator. Power: approx. 150 - 250 KG/hr.

Compounding system with GALA underwater granulation Material: PE, PP, PS, ABS // Details: segmented screws and cylinders, screw diameter 2x 40 mm, L/D 44, DC rotor, DC motor 104 kW with gearbox, worm speed: max. 1,200 rpm, 2-fold degassing, ground pressure transducer, start-up valve, water box, Gala A1PAC6 underwater granulation with water circulation system and centrifugal dryer, temperature control unit SINGLE STW 150/1-6-100-NS/E, 6-fachimetric dosing incl. control. Control: Macromatex. Power: approx. 200 - 400 KG/hr

Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC

pdf description attached

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)

Capacity: 2 t Stroke: 500 mm Number of broaches: 1   Key width 2 - 50 mm Pulling force 16.000 Nm Max. diameter product 500 mm Boring diameter 10 - 350 mm Large package key seating broching tools Table  Ø:     675 x 550mm Table load:   2000 Ram adjustment:0 - 400mm Length:       1200mm Width:        1450mm Height:       1600mm Weight:       1450kg

Screw Diameter: 50 mm // Throughput: 120 kg/h

Key data: 17 mm, 40 , 1200 U/min

Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //

groove width: 2-70 mm drawing length: 600 mm working speed: 0-20 m/min Control: Siemens 828D boring diameter: 10 - 440 mm drawing capacity - hydraulic: 21000 N max. load: 20000 kg return speed: 20 m/min feed freely programmable: 0 - 5 mm working height: 1030 mm weight of hydraulic aggregate with oil filling: 600 kg total power requirement: 7,5 kW machine weight ab.: 1500 kg dimensions of the machine ca.: 1,2 x 2,3 x 1,75 m Hydraulic Profile Keyseating Machine Equipment / Accessories: - automatic dividing head SKH-NC 6/53, complete / servo - overall height: 240 mm - inner Ø: 250 mm - outer Ø of table plate: 600 mm - table speed: 16.6 1/min - dividing options: via CNC, every 0.01° - coolant system consisting of oil tank, pump, pipework, spray nozzle - many !!!! accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 70 mm drawing length: 300 mm working speed: 0-25 m/min Control: SIEMENS OP 17 workpiece weight: 25.000 kg return speed: 40 m/min dimensions of the machine ca.: 1,2x2,3x1,65 m drawing capacity: 21.000 N total power requirement: 5 kW Machine does not need a foundation, accessories Products / Grooving machines - Polymat 25/32/70/100/125 CNC The machine series for medium and large quantities with great flexibility and many options. The universally applicable machines in the CNC series are used for the production of production of standard grooves as well as for the machining of special grooves. special grooves. The up to four controlled axes allow the production of workpieces with with helical grooves, grooves in blind holes and other special applications. CNC control, SIEMENS OP 17, innovative, because: 4-axis -> expandable Program memory Axis interpolation worldwide service mu ...

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

Barwell C3 Preformer Extruder 2500 psi Output 600kg/hour Ram type Extruder Extruder size 250mm With Rotary Cutter 8 fixed speeds Year 1980

Manufacturer: Paul Troester Maschinenfabrik/Hannover Year of construction: 1978, machine was in operation until the end of 2015 Screw diameter: 150 mm Length: 16 D (approx. 2,400 mm) Screw speed: 2.5-25 / 4 - 40 U/Min. Centre height of the extruder: 1,100 mm Type of gearbox 3 TH 990 K / 2s, 2 speeds. Gear ratio: = i1 16.5: 1 i2 = 26.4: 1 Maximum gearbox output torque: 45,000 nm Maximum permissible injection pressure: 350 bar without limitation through the extrusion head. The extruder will be overhauled and designed/changed according to customer's specification. Below pictures 1-4 show an extruder overhauled by us.

1 x Buss PR200? Ko-Kneader, supplied fully refurbished by Buss in 1995, G130 gearbox, 11 L/D ratio, with 340kW dc motor and controls. Including oil heater and TCU 2t/hr output. Spare screw and barrel segments.

According to the description below

8" Cold Feed Rubber Extruder

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.