Category: 110 accessories for machine tools / Dividing Units
Latest update: 20.03.2024 add to watchlist
approved
dealer
item-No.: 163617015

used

check Seller: Weber Werkzeugmaschinen GbR
Location: 87719 Mindelheim Land-de

add to watchlist

4. Axis incl. control for: milling, grinding, testing/measuring; Engrave IDEAL also for "machines in training" Specifications: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial runout: 0.006 (optional: 0.003 mm or 0.002 mm) Transport load max.: (limited by motor) without support: 40 kg (only if turntable is screwed down) with support: 80 kg Total weight, approx.: 25 kg Execution: - Stepper motor - motor-dependent, backlash-free timing belt drive including correct preload - With automatic spindle clamping with 6bar compressed air - Fully sealed IP 67 - Sensors with light-emitting diodes, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnostics - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis)  ...

Category: 1012 accessories
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 157300931
New in: 2003

used

check Seller: Knops Werkzeugmaschinen
Location: Land-de

add to watchlist

table length: 400 mm table width: 400 mm table load: 120 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used rotary table in very good condition, little used (less than 100 hours) Table diameter 400 mm Bosch AC-Motor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 504 sieving machines
Latest update: 06.12.2023 add to watchlist
approved
dealer
item-No.: 157724107

used

check Seller: J.G.M.N. Hensen Maschinenhandel B.V.
Location: Land-nl

add to watchlist

Size: 2.000 x 6.300 mm - Year of Manufacture: 2003 - With frame

Category: 504 sieving machines
Latest update: 06.12.2023 add to watchlist
approved
dealer
item-No.: 157724131

used

check Seller: J.G.M.N. Hensen Maschinenhandel B.V.
Location: Land-nl

add to watchlist

Size: 3.000 x 8.820 mm - Year of Manufacture: 1994 - With part of frame and conveyor belt - Vibrating screen will be overhauled, sandblasted and painted.

Category: 504 sieving machines / Screening machines
Latest update: 22.03.2024 add to watchlist
approved
dealer
item-No.: 160047543
New in: 2019

used

check Seller: L. Koreman & Zn Handelsonderneming BV
Location: 6222 NS Maastricht Land-nl

add to watchlist

Screening machine Hein Lehmann. Brand: Hein Lehmann Type: LS 1.5-32 DD Year of construction: 1998 - revision in 2019 Screen area : 7600 x 1500 mm - 2 deckers Drive: 45 kW electric motor Weight: 12 tons.

Category: 504 sieving machines / Screening machines
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 160642874
New in: 2003

used

check Seller: L. Koreman & Zn Handelsonderneming BV
Location: Land-nl

add to watchlist

Screening machine Hein Lehmann Brand: Hein Lehmann Type: flip/flop Screen area : 5300 x 1500 mm - 1 decker Drive: 11 kW electric motor Incl.: base.

Category: 1002 plants for production and converting of building materials / Screening machines
Latest update: 05.10.2023 add to watchlist
approved
dealer
item-No.: 161515690
New in: 1986

used

check Seller: ENDERS Produktion GmbH
Location: 97799 Oberleichtersbach Land-de

add to watchlist

Screen area: approx. 2,000 x 7,000 mm 30 kW electric motor

Category: 504 sieving machines / Vibrating screening machines (1-deck)
Latest update: 05.10.2023 add to watchlist
approved
dealer
item-No.: 162284265
New in: 1988

used

check Seller: ENDERS Produktion GmbH
Location: 97799 Oberleichtersbach Land-de

add to watchlist

Type: SPF 1,5x20 Screen area: 1,500 x 5,000 mm with new 6mm screen linings with steel construction

Category: 504 sieving machines / Vibrating screening machines (2-deck)
Latest update: 05.10.2023 add to watchlist
approved
dealer
item-No.: 162284267

used

check Seller: ENDERS Produktion GmbH
Location: 97799 Oberleichtersbach Land-de

add to watchlist

Type: LS2-26DD Double deck screen box 2,000 x 6,000 mm new screen linings built on 4-axle trailer with DEUTZ diesel generator and control cabinet Outlet boxes, chutes and belts

Category: 503 shredders
Latest update: 06.12.2023 add to watchlist
approved
dealer
item-No.: 162915320

used

check Seller: J.G.M.N. Hensen Maschinenhandel B.V.
Location: Land-nl

add to watchlist

L x W: 4.000 x 1.600 mm. - With frame, electrical motor, cardan-shaft and springs

Category: 504 sieving machines
Latest update: 06.12.2023 add to watchlist
approved
dealer
item-No.: 162915358

used

check Seller: J.G.M.N. Hensen Maschinenhandel B.V.
Location: Land-nl

add to watchlist

Size: 2.000 x 5.460mm. - With part of frame, E.Motor and Rubber springs

Category: 504 sieving machines
Latest update: 06.12.2023 add to watchlist
approved
dealer
ankerimg
item-No.: 162915361

used

check Seller: J.G.M.N. Hensen Maschinenhandel B.V.
Location: Land-nl

add to watchlist

Size: 1.000 x 3.780 mm - Included frame - Will be overhauled, sandblasted and painted

Category: 1200 machines and plants for process engineering
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163419353

used

check Seller: Foeth
Location: Barneveld Land-nl

add to watchlist

* General * SKU342U846 * LocationBarneveld * MakeLehmann * TypeFM 20 Ex * No.011766 * Year of construction1998 * Main Features * MaterialStainless steel * Volume20 Ltr. * Motor17.5 KW * Specified Features - Sand mill * MaterialStainless steel 1.4306 (304L) * Horizontal sand millcheck * Capacity20 Ltr. * Housing dimensions dia. 300x415 mm * Inletdia. 45 mm * With mechanical sealcheck (Chetra GmbH) * With jacketcheck * Motor17,5 kW 400 Volt (Ex) * With ballscheck (Ø 1,2/1,7 mm) * Information * Mounted on framecheck * With switchcheck * Weight900 kg * CEcheck * With switchgearcheck(as is) * Floorspace2,1x0,7 m * ATEX compatiblecheckSand millsLehmannMills > Sand millsBrand > Lehmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

Category: 1200 machines and plants for process engineering
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163419535

used

check Seller: Foeth
Location: Barneveld Land-nl

add to watchlist

* General * SKUR1274 * LocationBarneveld * MakeFb Lehmann * TypeFM-20 * No.204 503 * Year of construction1992 * Main Features * MaterialStainless steel * Volume18.3 Ltr. * Motor18.5 KW * Specified Features - Sand mill * MaterialStainless steel * Horizontal sand millcheck * Capacity18.3 Ltr * Housing dimensions dia. 265x450 mm * Inletdia. 25mm * OutletDN40 * With mechanical sealcheck (Feodor Burgman) * With jacketcheck * Motor18,5 kW 415 Volt * Information * With switchgearcheck * Total height1,7 M * Weight900 Kg * CEcheck * Floorspace2,1x0,7 M * Technical specs * Extra informationBarrel inside is SS430 (Stainless steel with magnetic properties)Sand millsFb LehmannMills > Sand millsBrand > Fb Lehmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the m ...

Category: 1200 machines and plants for process engineering
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163420001

used

check Seller: Foeth
Location: Barneveld Land-nl

add to watchlist

* General * SKU059G268 * LocationBarneveld * MakeF.B. Lehmann GmbH Aalen * TypeVSC * No.010580 * Year of construction1993 * Main Features * MaterialStainless steel * Surface0.4 m2 * Sizes diameter764 mm * Specified Features - Vibro sieve * Vibro sieve(1x) * Sieve surface0,46 m2 * Number of sieve decks:1 * Sieve sizesdia. 840mm * With cover(plastic) * Inletdia. 100mm * Outlet1x dia. 145mm * Motor3,2 KW, 380 Volt * Sieve perforation± 1,5x1,5mm * With ring cleaningcheck * With brush cleaningcheck * MaterialStainless steel * Information * Floor space1,1x1,0 M * Total height1,5 M * Weight430 KGMinerals & inorganicPlastic & rubberPlastic & polymersSolid pharmaceuticsOther feedRubberAnimal feedOther chemicalStarchSugarOrganicsOther pharmaceuticsGeneric medicinesPowdered foodsConsumer wasteVibro sievesPaper & otherFeed additivesFb LehmannIndustries > Chemical > Minerals & inorganicIndustries >  ...

Category: 1200 machines and plants for process engineering
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163420215

used

check Seller: Foeth
Location: Barneveld Land-nl

add to watchlist

* General * SKU319M527 * LocationBarneveld * MakeLehmann * TypeWD-13 * No.09442 * Year of construction1990 * Main Features * Motor55 KW * Inlet diameter400 mm * Width1300 mm * Specified Features - Three roll mill * Three roll millcheck * Roll diameter400mm * Roll width1300mm * Rolls placed inclinedcheck * Motor+/- 55KW * Hydraulic roll adjustmentcheck * Rolls can be cooledcheck * With inlet hoppercheck * With scrapercheck * MaterialMild steel * Information * Floorspace2,7x1,7 M * Total height1,8 M * Weight5900 KGThree roll millsLehmannMills > Three roll millsBrand > Lehmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 1200 machines and plants for process engineering
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163420450

used

check Seller: Foeth
Location: Barneveld Land-nl

add to watchlist

* General * SKU219S087 * LocationBarneveld * MakeF.B. Lehmann Maschinenfabrik GmbH (D) * TypeFM-20 * No.010666 * Year of construction1995 * Main Features * MaterialStainless steel * Volume18.3 Ltr. * Motor18.5 KW * Specified Features - Sand mill * MaterialStainless steel * Horizontal sand millcheck * Capacity18,3 ltr * Housing dimensions dia. 265x450mm * Inletdia. 30mm * Outletdia 30mm * With mechanical sealcheck * Motor18,5kW 415 Volt * With ballscheck * Information * With switchgearcheck * Total height2 M * Weight900 Kg * CEcheck * Floorspace1,7x0,8 M * Extra Specificationsunused including Rotan pump type HD 51 ECHD 1M22BS Sand millsFb LehmannMills > Sand millsBrand > Fb Lehmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

Category: 505 other machinery for waste disposal and recycling / Conveying belts
Latest update: 02.10.2023 add to watchlist
approved
dealer
item-No.: 37711792

new

check Seller: BELTech GmbH
Location: Lüdenscheid Land-de
Price: VB 110 € add to watchlist

FOOD CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -one side coated underside of fabric with additional wedge bar, (11 mm wide x 8 mm high) in the Middle -endless -Food safe, white -Dimensions: 5,100 mm x 300 mm width x thickness length approx. 1.2 mm, surface with tunnels. -Tunnel approx. 20 mm in height, distance approx. 300 mm, tunnel length 245 mm, studs tip inclined (see photo) On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible)

Category: 505 other machinery for waste disposal and recycling / Conveying belts
Latest update: 05.01.2021 add to watchlist
approved
dealer
item-No.: 12359124

used

check Seller: Reinhard
Location: Land-de

add to watchlist

Stockpile conveyor: length 18 m width: 0.60 Gemuldet, Glattgurt.hydraulisch height-adjustable Stockpile conveyor: 18 m length 0.60 width troughed. hydraulic adjustable. Kontakt:rerec@Web.de or mobile: 0049 160 96232593

Category: 1406 conveyor belts
Latest update: 18.12.2023 add to watchlist
approved
dealer
item-No.: 10886906
New in: 2023

new

check Seller: Markus Klanke Entsorgungssysteme
Location: Land-de

add to watchlist

Container filling system Turret with horizontal Rotary and longitudinal moving conveyor on sturdy galvanized frame, swivel bearings. Incl. support climbing belt and tied up to the automatic filling of three large containers. PLC control Distribution belt gear motor 2 .2kW / conveyor width 900 mm Achabstand 5500 mm Drive rotation 0, 6kW Rotation drive +/-90 ° Climbing belt conveyor width 600 mm / distance 4000 mm / drive 1, 1kW High belt conveyors conveyor width 600 mm / distance 4700 mm / drive 1, 1kW Colour RAL 9006 / White aluminium System now available Price and further details on request

Category: 505 other machinery for waste disposal and recycling / Conveying belts
Latest update: 16.01.2024 add to watchlist
approved
dealer
item-No.: 150039785
New in: 1995

used

check Seller: Brand GmbH
Location: 01587 Riesa Land-de

add to watchlist

Chain rubber belt conveyor, feed belt for recyclables, conveyor belt, conveyor belt, flat belt used HÖMA GmbH KGF 1200 Built in 1995 Length approx. 2.5 m Width band approx. 1150 mm Chain rubber belt Construction width approx. 1600 mm Gearmotor 1.5 kW Total dimensions: approx. 2500 x 1600 x 1100 mm The tape was used in the recycling industry and was used to feed paper and cardboard for a baling press.

Category: 505 other machinery for waste disposal and recycling / Conveying belts
Latest update: 02.02.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 150056670

used

check Seller: NEUE HERBOLD Maschinen- u. Anlagenbau GmbH
Location: 74889 Sinsheim-Reihen Land-de

add to watchlist

Horizontal conveyor belt Axle distance: 5000mm Belt width: 1500mm Speed: 0.015 m/s Belt quality: smooth EP 400/3 Grid frame construction Colour: RAL 5015 Drive 1.1 kW Side guides with PVC thickening

Category: 308 other machines for plastic / Conveying belts
Latest update: 02.02.2024 add to watchlist
approved
dealer
item-No.: 150056700
New in: 2012

used

check Seller: NEUE HERBOLD Maschinen- u. Anlagenbau GmbH
Location: 74889 Sinsheim-Reihen Land-de

add to watchlist

Conveyor belt / belt conveyor Belt width: approx. 1,400 mm Axle distance: approx. 8,000 mm Drive: 2.2 kW

Category: 308 other machines for plastic / Conveying belts
Latest update: 02.02.2024 add to watchlist
approved
dealer
item-No.: 150056702
New in: 2017

used

check Seller: NEUE HERBOLD Maschinen- u. Anlagenbau GmbH
Location: 74889 Sinsheim-Reihen Land-de

add to watchlist

Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use

Category: 505 other machinery for waste disposal and recycling / Conveying belts
Latest update: 25.10.2023 add to watchlist
approved
dealer
item-No.: 150397381
New in: 2012

used

check Seller: Brauner Recyclingtech GmbH
Location: Land-de

add to watchlist

used conveyor belt Manufacturer: AVERMANN Type: Chain conveyor belt Year of construction: submitted technical data: Conveyor width: 1,800 mm Axle distance: approx. 10,000 mm Installation according to photos. Subject to errors in the technical data!

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online