used LEHMANN MASCHINENBAU Extruders

4. Axis incl. control for: milling, grinding, testing/measuring; Engrave IDEAL also for "machines in training" Specifications: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial runout: 0.006 (optional: 0.003 mm or 0.002 mm) Transport load max.: (limited by motor) without support: 40 kg (only if turntable is screwed down) with support: 80 kg Total weight, approx.: 25 kg Execution: - Stepper motor - motor-dependent, backlash-free timing belt drive including correct preload - With automatic spindle clamping with 6bar compressed air - Fully sealed IP 67 - Sensors with light-emitting diodes, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnostics - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis)  ...

table length: 400 mm table width: 400 mm table load: 120 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used rotary table in very good condition, little used (less than 100 hours) Table diameter 400 mm Bosch AC-Motor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: 2.000 x 6.300 mm - Year of Manufacture: 2003 - With frame

Size: 3.000 x 8.820 mm - Year of Manufacture: 1994 - With part of frame and conveyor belt - Vibrating screen will be overhauled, sandblasted and painted.

Screening machine Hein Lehmann. Brand: Hein Lehmann Type: LS 1.5-32 DD Year of construction: 1998 - revision in 2019 Screen area : 7600 x 1500 mm - 2 deckers Drive: 45 kW electric motor Weight: 12 tons.

Screening machine Hein Lehmann Brand: Hein Lehmann Type: flip/flop Screen area : 5300 x 1500 mm - 1 decker Drive: 11 kW electric motor Incl.: base.

Screen area: approx. 2,000 x 7,000 mm 30 kW electric motor

Type: SPF 1,5x20 Screen area: 1,500 x 5,000 mm with new 6mm screen linings with steel construction

L x W: 4.000 x 1.600 mm. - With frame, electrical motor, cardan-shaft and springs

Size: 2.000 x 5.460mm. - With part of frame, E.Motor and Rubber springs

Size: 1.000 x 3.780 mm - Included frame - Will be overhauled, sandblasted and painted

* General * SKU342U846 * LocationBarneveld * MakeLehmann * TypeFM 20 Ex * No.011766 * Year of construction1998 * Main Features * MaterialStainless steel * Volume20 Ltr. * Motor17.5 KW * Specified Features - Sand mill * MaterialStainless steel 1.4306 (304L) * Horizontal sand millcheck * Capacity20 Ltr. * Housing dimensions dia. 300x415 mm * Inletdia. 45 mm * With mechanical sealcheck (Chetra GmbH) * With jacketcheck * Motor17,5 kW 400 Volt (Ex) * With ballscheck (Ø 1,2/1,7 mm) * Information * Mounted on framecheck * With switchcheck * Weight900 kg * CEcheck * With switchgearcheck(as is) * Floorspace2,1x0,7 m * ATEX compatiblecheckSand millsLehmannMills > Sand millsBrand > Lehmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

* General * SKUR1274 * LocationBarneveld * MakeFb Lehmann * TypeFM-20 * No.204 503 * Year of construction1992 * Main Features * MaterialStainless steel * Volume18.3 Ltr. * Motor18.5 KW * Specified Features - Sand mill * MaterialStainless steel * Horizontal sand millcheck * Capacity18.3 Ltr * Housing dimensions dia. 265x450 mm * Inletdia. 25mm * OutletDN40 * With mechanical sealcheck (Feodor Burgman) * With jacketcheck * Motor18,5 kW 415 Volt * Information * With switchgearcheck * Total height1,7 M * Weight900 Kg * CEcheck * Floorspace2,1x0,7 M * Technical specs * Extra informationBarrel inside is SS430 (Stainless steel with magnetic properties)Sand millsFb LehmannMills > Sand millsBrand > Fb Lehmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the m ...

* General * SKU059G268 * LocationBarneveld * MakeF.B. Lehmann GmbH Aalen * TypeVSC * No.010580 * Year of construction1993 * Main Features * MaterialStainless steel * Surface0.4 m2 * Sizes diameter764 mm * Specified Features - Vibro sieve * Vibro sieve(1x) * Sieve surface0,46 m2 * Number of sieve decks:1 * Sieve sizesdia. 840mm * With cover(plastic) * Inletdia. 100mm * Outlet1x dia. 145mm * Motor3,2 KW, 380 Volt * Sieve perforation± 1,5x1,5mm * With ring cleaningcheck * With brush cleaningcheck * MaterialStainless steel * Information * Floor space1,1x1,0 M * Total height1,5 M * Weight430 KGMinerals & inorganicPlastic & rubberPlastic & polymersSolid pharmaceuticsOther feedRubberAnimal feedOther chemicalStarchSugarOrganicsOther pharmaceuticsGeneric medicinesPowdered foodsConsumer wasteVibro sievesPaper & otherFeed additivesFb LehmannIndustries > Chemical > Minerals & inorganicIndustries >  ...

* General * SKU319M527 * LocationBarneveld * MakeLehmann * TypeWD-13 * No.09442 * Year of construction1990 * Main Features * Motor55 KW * Inlet diameter400 mm * Width1300 mm * Specified Features - Three roll mill * Three roll millcheck * Roll diameter400mm * Roll width1300mm * Rolls placed inclinedcheck * Motor+/- 55KW * Hydraulic roll adjustmentcheck * Rolls can be cooledcheck * With inlet hoppercheck * With scrapercheck * MaterialMild steel * Information * Floorspace2,7x1,7 M * Total height1,8 M * Weight5900 KGThree roll millsLehmannMills > Three roll millsBrand > Lehmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU219S087 * LocationBarneveld * MakeF.B. Lehmann Maschinenfabrik GmbH (D) * TypeFM-20 * No.010666 * Year of construction1995 * Main Features * MaterialStainless steel * Volume18.3 Ltr. * Motor18.5 KW * Specified Features - Sand mill * MaterialStainless steel * Horizontal sand millcheck * Capacity18,3 ltr * Housing dimensions dia. 265x450mm * Inletdia. 30mm * Outletdia 30mm * With mechanical sealcheck * Motor18,5kW 415 Volt * With ballscheck * Information * With switchgearcheck * Total height2 M * Weight900 Kg * CEcheck * Floorspace1,7x0,8 M * Extra Specificationsunused including Rotan pump type HD 51 ECHD 1M22BS Sand millsFb LehmannMills > Sand millsBrand > Fb Lehmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

Cartons for standing products

Made in Germany

Made in Germany

Made in Germany

Made in Germany

Made in Germany

Made in Germany

Made in Germany

Made in Germany