lathe used for sale

LOCATELLI- model BIG-ARIETE- Hi production- automatic copy lathe fully hydraulic cycles and tooling advances: automatic hopper feeds squares or round blanks Station #1...blank is advanced...first trim knife trims to blank to fit thru hollow chuck Station #2...(1) roughing knife follows template...to rough to basic shape Station #3...(1) finishing knife makes the first finish cut Station #4...(1) finishing knife (set slightly deeper) makes finish cut Station #5 & #6 end boring or shaping the outer edge (if needed) Station #7...(1) parting tool ...mills the finished part off the blank finish part drops.head stock advances to scheduled stop ...cycle continues 400+ parts per hour are possible complete with lots of tooling and various size steady rests

Reichenbacker copy lathe mills/ turns (6) concentric or non concentric pieces at a time (1) station for your model/sample (models may be wood or metal) complete set up for duck decoys various sizes - items like Queen Ann legs, ect (photos available) (6) milling /working stations

Hemco hydraulic tracing lathe Hopper feed very good condition...$7,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Special attachment for lathes gt; for reworking crankshafts - this attachment can be fixed on top of the cross-slide - via a pneumatic cylinder the top part of the attachment can tilt op to allow the crankshaft to be installed in the chuck - once the crankshaft has been installed in the chuck of the lathe the top part can be closed and positioned around the area that needs to be reworked - once activated the tool insert of the attachment will start turning around the crankshaft to remove excess material. The chuck does not have to turn the crankshaft! The advantage of this concept is that the tool moves around the crankshaft - by doing this the least amount of stress is put on the crankshaft. This in contrast to the classic setup where the stationary tool is pressed into a workpiece being turned by the chuck of the lathe. Max dia of crankshaft: 330 mm

ZUCKERMAN CHALLENGER- auto copy lathe and sander, capacity - ( mills 10" dia.by a max. of 120" long) mills using cup cutters- followed by (1) sanding station, unit has hopper feeder, mills & sands one part at a time, does parts like: boat oars, shovel handles, gunstocks, chair legs, ect. Price-$10,900

Lathe, dimensions: 2350 mm x 200 mm x 1600 mm.

Reinbacker- rope turning lathe chuck up your part- twin routers transverse your material as lathe slowly rotates your material several passes give you a straight or tapered spiral like a rope turning or straight or spiral flutes

AUTOMATIC SPINNING LATHE DENN RPE-290 Denn Mod.RPE-290 Automatic Spinning Lathe- Spindle Speeds 615/1060/1825 RPM. More information on request.

Screw-cutter lathe Ryazan1A64 - max turning length: 2800 mm - turning diameter above the bed (max): 800 mm - turning diameter above cross slide (max): 450 mm - workpiece weight in chuck (max): 5000 kg - lathe length: 5825 mm - lathe width: 2000 mm - lathe height: 1660 mm - lathe weight: 11.5 t Price - 7800 Eur

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...

Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0  Diametrical thread: (32) 7.5 - 112  Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...

Specifications: Center height: 230 mm Center width: 1000 mm Circulation diameter over bed: 475 mm Circulation diameter over bed slide: 320 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (18) 25 - 2240 1/min Motor power: 3.5 / 6 kW, 2-stage Tailstock mount: MK 4 Quill stroke: 120 mm Longitudinal feed: 0.06 - 0.8 m/rev Transverse feed: 0.044 - 0.6 m/rev Weight, approx.: 1800 kg Dimensions (wxDxH), approx.: 2560 x 1200 x 1710 mm Equipment: - 3-axis digital display, brand: Heidenhain - 3-jaw lathe chuck ø 315 mm with reversible jaws - Quick-change holder System Multifix - Rotating grain tip - Lathe chuck protection with limit switch protection - Emergency stop push button - Coolant device - Machine light - Chip pan

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

TH 3309 Control and spindle lathe Fixed bezel D = 19-70 mm Revolving bezel D = 16-50 mm LED machine lamp Reduction sleeve MK 3 / MK 5 Motor protection switch Emergency stop foot operated Engine: 400V 1, 5 kW 50 Hz Tip height 156 mm Top width 830 mm Spindle speed 60 - 2000 min-1 16 levels Spindle cone MK 5 Spindle bore D = 38 mm Weight 430 kg Dimensions Lxwxh: 1685 x 745 x 1320 mm G & PIECES 3402030

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

No. 4620: 1 gebr. Guide and pull spindle lathe Fabr. BOLEY, Type 5 LZ, Arb.-Ber.: SpH 130 x 500 mm, Other: Spindle speeds: in 22 stages 28 - 2550 min-1 Space requirement: 1.5 x 0.9 x 1.25 m Weight ca 800 kg

Description Universal lathe suitable for tooling, fixture construction, training and mould making Peak height: 180mm Speed:25-2000 rpm Technical data Built in 2015 Speed 25-2000 rpm Peak height 180mm (360mm) Peak width 1000mm Spindle passage 38mm Reitstock MK 3 Total power requirement 4 KW Weight 880kg Connection 50 Hz 3x 380V

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL

Platò diameter: 1300 mm Used lathe in good condition, available unless sold.

Main technical data: - Tip distance: 6000 mm - Tip height: 640 mm - Lathe complete with spindle, tailstock and tool turret

Machine Details Warehouse number 1105-03364 Machine type lead and pull spindle lathe Make CAZENEUVE Type HB 525 X 1000 Year of construction 1965 Conventional control type Storage location HAGUENAU Country of origin France Delivery time Immediate Freight base EX WAREHOUSE Technical details Turning diameter over bed 500 mm Turning diameter via support 220 mm Turning length 1000 mm Spindle speeds 25-2000 rpm various accessories YES Information IN GOOD WORKING CONDITION LOT OFF ACCESSORIS WITH MULTIFIXE TOOL HOLDER SYSTEMS

Screw cutter lathe Ryazan 165 distance between centre: 3000mm, turning diameter over slide rest: 1000 mm, turning length: 3000 mm, spindle bore: 95 mm, weight: 12,5 ton Price 8500EUR

Screw-cutter lathe Ryazan 165 Max. work piece diameter 1200 mm Max. work piece diameter above support 650 mm Distance between centers 5000 mm Diameter of spindle hole 85 mm Spindle speed, rpm 5…500 Spindle moto 22 kW Threading: – metric 1…120 – inch 28…1/4 – module 0,5…30 Number of threads: – metric 44 – inch 31 – module 37 Machine dimensions, mm 8050 x 2200 x 1876 Weight of the machine, kg app. 16800 Price - 12500 EUR

1x Lathe Manufacturer: TOS Type : SUI 80/4000 Year of construction: 2020 Commissioning: 09.2020 Turning length: 4000mm Turning diameter over bed: 800mm Turning diameter via slide: 520mm Speed max: 14-1400rpm Through hole: 92mm Spindle bearing diameter: 140 mm Accessories: - retrofitted frequency converter, - Position indicator 3-AX Heidenhain ND7013, - Quick release head system Multifix D + holder D1D 40180 Machine condition: almost New Delivery time: March 2023

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

Control and feed spindle lathe Manufacturer Geminis Type GE870 Turning diameter 870mm Turning length 4000mm the machine also has a face plate 900mm and a fine bezel. Guides are very good, no wear to see. 400mm Forkardt wedge bar chuck 3 axis digital display Machine was stored about 3 years ago and is no longer used.

PRECISION LATHE / HAMLET COMMODOR 180 GSD Year of construction 2022 / NEW MACHINE Tip height 180mm Center width 1000mm Circumferential diameter over bed 380mm Orbit diameter via face slide 215mm Spindle head DIN 55027 - size 6 Spindle bore 56mm Inner cone MK 6 Cgvnfcyuff Main drive 4 KW Speed range 25 - 2000 1/min Number of gear stages / 9 pieces Number of speed stages / 16 pieces Number of feeds - 200 pieces Longitudinal feeds 0.026 - 0.9 mm/rev Feed rates 0.013 - 0.45 mm/rev Thread /metric 0.3 - 10mm Thread / inch 80 - 2.75 g/inch Quill diameter 80mm Quill stroke 150mm Pinolenkegel MK 4 Coolant device Work light Chip back wall 3 - Axis Digital Display Type - Sino Three-jaw chuck - 200mm Quick-change holder with insert Complete documentation Dimensions: LxWxH 2,6x1.3x1,6 Meter Weight 1800Kg

L+Z Lathe GDW LZ 250 Cdymapnl Center height 125mm Center width 500mm Spindle bore 38mm Connected load 4KW Röhm - Three-jaw lining Digital Collets - Quick clamping device Multifix with inserts Chip back wall Documentation Dimensions: LxWxH 1.4x0.7x1.5 meters Weight 650Kg

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.

Used parallel lathe EST TICINO 400 available and visible at our office. Technical data: - CAM-LOCK connection - ELBO 2-axis dimension viewer - Quick checks on the wagon - Spindle brake - Centre height: 400mm - Distance between the centres: 3000mm - Turning diameter on the wagon: 550mm - Table turning diameter: 820mm - Turning diameter on the recess: 1050mm - Bar clearance: 130mm

Key data: 417 , 830

Lathe in excellent condition, mechanically like new. Technical data: - Centres height: 417 mm - Distance between the centres: 2000 mm - Spindle hole 113mm - Bench width: 560 mm - Turning diameter on the bench: 830 mm - Turning diameter on the deep hole: 510 mm - Visualization by DRO Available for immediate delivery. Machine in excellent condition, like new!

Center height: 160 mm Center width: 880 mm Spindle bore: 48 Bed width: 312 mm Speeds: 45 - 2000 min-1 Motor power: 5.5 kW Tailstock mount: MK 4 Quill stroke: 140 mm Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2250 x 1030 x 1650 mm Equipment: - 3-axis digital display, brand: Sino, new - 3-jaw lathe chuck - Emergency stop impact button - Quick release holder System Multifix - Machine light - Bed stop - Coolant device - Rotating grain tip - Machine shoes - Splash guard back panel -Operating instructions

Center height:165 mm Center width: 750 mm Spindle bore: 38 mm Bed width: 195 mm Speeds: (16) 35 - 2480 min-1 Motor power: 2.5 / 2.0 kW Tailstock mount: MK3 Quill stroke: 100 mm Dimensions, approx.: 1650 x 540 x 1450 mm Equipment: - 3-jaw lathe chuck - Emergency stop impact button - Quick release holder System Multifix - Bed stop - Reducing sleeve MK3, MK5 - Splash guard back panel - Interchangeable gears - Jaw chuck protection with limit switch - Coolant device - Operating tool - Service incl. oil change

Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m

Lead and pull spindle lathe WEILER CONDOR incl. new Digital -Original paint -Turning diameter over bed 330mm -Turning diameter over support 170mm -Turning length 800mm -Center height 160mm -Spindle bore 38mm -Spindle speeds 24-2800 rpm -Automatic longitudinal/plan feeds -Tailstock MK3 -Not/Off bcpc8wp9r2w -Total power requirement 3KW -Three-jaw chuck / Four-jaw chuck -Documentation -Multifix with insert Dimensions: LxWxH approx. 1.9x0.9x1.5 meters Weight 850Kg

Specifications: Center height: 255 mm Center width: 1450 mm Spindle bore: 63 mm Bed width: 385 mm Speeds: (12) 20 - 1100 1/min Tailstock mount: MK 4 Quill stroke: 150 mm Weight, approx.: 2250 kg Dimensions (LxDxH), approx.: 3100 x 1000 x 1580 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck with a set of additional jaws - 6 inserts quick-change bracket System Multifix - Face plate ø 445 mm - Operating tool

Key data: 200 mm, 400 mm, 40 U/min

Harrison in TOP CONDITION. SH 200 mm SW 1500 mm Tailstock MK5 Removable bridge Emergency Out , Bremese , Feed Protection Coolant system Face plate 2 lathe chuck Grinding device Cabinet with high-quality accessories.

Lead/Pull Screw Lathe Weiler Matador (Machine number: M2271) Turning length: 470 mm Center width: 500 mm Center height: 150 mm Turning diameter over face slide: 155 mm Circulation diameter over bed: 295 mm Multifix A Spindle bore: 36 mm 36 spindle speeds: 15-3550 rpm Digital display Heidenhain (1 axis) Chuck protection not locked 3-jaw chuck

Lead and drive screw lathe WEILER Condor incl. new digital display. - Original paint - Turning diameter over bed 330 mm - Turning diameter over support 170 mm - Turning length 800 mm - Center height 160 mm - Spindle bore 38 mm - Spindle speeds 24-2800 rpm - Automatic longitudinal/face feeds - Tailstock MK3 - Emergency/Off - Total power requirement 3 KW - Three-cheek butter / four-cheek lining -Documentation - Multifix with insert Bcpc8wp9r2w Dimensions: LxWxH: approx. 1.9x0.9x1.5 meters Weight: approx. 850 kg

MEUSER M II S gap bed engine screw cutting lathe Swing over ways 600 mm Swing over cross slide 400 mm Swing in gap 860 mm Turning length 1500 mm Spindle speed 1200 rpm Steady rest Chucks- 3 pcs Threads metric & English Weight ca. 2500 kg

Key data: 165 mm, 60 U/min

Machine Type: Lead and Tension Screw Lathe Manufacturer: AVM / Angelini Model: MAS 165 x 800 Year of construction: 1980 Condition: very good Offer Type: Used Machine Specifications: Center height: 165 mm Center width: 800 mm Spindle bore: 32 mm Speed range: 60 – 1600 rpm. Propulsion: 1.1 kW Remark: Röhm 3-jaw chuck Ø 160 mm with interchangeable jaws, Röhm 4-jaw chuck Ø 160 mm with interchangeable jaws, Quick-change steel bracket System Multifix size A with 2 inserts, coolant device, rotating bezel, fixed bezel, rotating grain tip, Chuck drive flange, interchangeable wheels, Operating instructions Weight: 450 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Specifications: Center height: 160 mm Center width: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock mount: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Equipment: - 3-jaw lathe chuck - Quick-change holder System Multifix - Spindle protection with limit switch protection - Bed stop - Emergency stop push button - Coolant device - Machine light - Machine feet

Specifications: Center height: 160 mm Center width: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock mount: MK 3 Quill stroke: 110 mm Feed rate: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Spindle protection with limit switch faces - Emergency stop push button - Bed stop - Machine light - Coolant device - Machine feet

Specifications: Center height: 160 mm Center width: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock mount: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Spindle protection with limit switch protection - Bed stop - Emergency stop push button - Machine light - Coolant device - Machine feet

Specifications: Center height: 190 mm Center width: 1000 mm Spindle bore: 56 mm Bed width: 305 mm Speeds: 25 - 2000 1/min Drive power: 4 kW Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: 0.022 -0.800 mm/rev Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2160 x 1120 x 1670 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Lead and tension screw safety device - Spindle protection with limit switch protection - Swivel steel holder protection - Rotating grain tip - Bed stop - Coolant device - Emergency stop push button - Machine light