british flag
Resale Logo

Lathe used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information Recycling & Environmental Technique  Hawamex  http://www.hawamex.de 
banner logo
start page > keywords Lathe > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
126374318 107

LEIFELD PNC 109 for sale
Metal Spinning Lathe


TECHNICAL DATA Max Blank Diameter 1,060 mm 41.34 inch Distance Between Centers 1,500 mm 59.06 inch Longitudinal Slide Stroke 600 mm 23.62 inch Cross Slide Stroke 350 mm 13.73 inch Slide Thrust, ...
used machine
 
TECHNICAL DATA

Max Blank Diameter 1,060 mm 41.34 inch
Distance Between Centers 1,500 mm 59.06 inch
Longitudinal Slide Stroke 600 mm 23.62 inch
Cross Slide Stroke 350 mm 13.73 inch
Slide Thrust, each 50 kN 11,240 lb/force
Tailstock Sleeve Stroke 500 mm 19.69 inch
Tailstock Sleeve Thrust 33 kN 7.418 lb/force
Ejector Stroke 400 mm 15.75 inch
Ejector Thrust 27 kN 6,070 lb/force
AC Spindle Drive Rating 28 kW 36 HP
Hydraulic System 15 kW 20 HP
Spindle Speed Range:
1. Step 72 – 575 rpm
2. Step 286-2,300 rpm
Tool Mounting using Centering Flange DIN # 8
Approximate Net Weight 10,000 kg 22,000 lbs

ACCESSORIES

Hydraulic center device
Hydraulic Ejector
Material Support Cylinder
Material Spraying Unit
KA Unit
2000
Price  
  CA   request
126401728 102

GILDEMEISTER N.E.F. 500 for sale
Lathe (cycle-controlled)


Weight approx.: 2650 kgDimensions (l x w x h) approx.: 2500 x 1750 x 1850 mmDescription: Max. swing diameter over bed 500 mm, max. swing diameter over cross slide 290 mm, distance between centers 1000 mm, spindle bore 70 ...
used machine
 
Weight approx.: 2650 kg
Dimensions (l x w x h) approx.: 2500 x 1750 x 1850 mm
Description: Max. swing diameter over bed 500 mm, max. swing diameter over cross slide 290 mm, distance between centers 1000 mm, spindle bore 70 mm, stepless spindle speeds in 3 gear stages 8 ? 250/20 ? 710/80 ? 2800 rpm, max. torque at the spindle 1050 Nm, rapid traverses X/Z 6/8 m/min., quill stroke tailstock 180 mm, quill diameter tailstock 80 mm, quill mount MK 5, drive power headstock 11kW, DR. HEIDENHAIN ManualPlus, 3-jaw chuck ROEHM 250, coolant unit, quick-change tool holder MULTIFIX C, operating hours according to counter 29985 h
Machine is under power and ready for demonstration.
1993
used machinery auction RESALE 5,900 €  
  DE   request
126374277 102

TADU F for sale
Facing Lathes


Plan lathe plan lathe Manufacturer: Tadu Type: F Year of built: unknown Clamping diameter: 1200 mm
used machine
 
Plan lathe plan lathe
Manufacturer: Tadu
Type: F
Year of built: unknown

Clamping diameter: 1200 mm
 
Price  
    request
126401735 102

WMW NILES DP3 / DP3X /S 3 x 20000 for sale
DP3 CNC Heavy Duty Lathe


Weight approx.: 64000 kgdiameter: 2500 mmfaceplate diameter: 2500 mmturning diameter over bed: 2350 mmturning diameter over slide: 1600 mmturning length: 20000 mmworkpiece weight: 25000 kgDimensions (l x w x h) approx.:  ...
used machine
 
Weight approx.: 64000 kg
diameter: 2500 mm
faceplate diameter: 2500 mm
turning diameter over bed: 2350 mm
turning diameter over slide: 1600 mm
turning length: 20000 mm
workpiece weight: 25000 kg
Dimensions (l x w x h) approx.: 25000 x 2600 x 2600 mm
turning speed range: 0,45 - 140 rpm
spindle bore: 100 mm
feed range: 0,009 - 25 mm/r
total power requirement: 60 kW
control: SIEMENS SINUMERIK 810 T
Description:

WMW NILES DP3 / DP CNC Heavy Duty Lathe



Technical specifications

- CNC control SIEMENS SINUMERIK 810 T
- Max. turning length: 20000 mm
- Faceplate diameter: 2500 mm
- Thread console
- Drive power: 50kW
- Nominal voltage: 380 V
- Control voltage: 220 V
- Total power requirement: ca. 60 kW
- Nominal current: 118 A

Faceplate

- Faceplate diameter: 2500 mm
- Centre height: 1250 mm
- Spindle bore: 150 mm
- Max. torque on Faceplate: 55000Nm

Guideways

- 3 guideways flat
- Total length approx. 22000 mm (2 x 3200 mm, 3 x 5200 mm)

Accessories

- 3 x steady rest
- 2 x Carriage
- Tailstock
1979
Price  
  DE   request
126374263 102

VOEST for sale
Lathe


Bed length: 1400mm, turning length: 1000mm, face plate diameter: 420mm, with accessories.
used machine
 
Bed length: 1400mm, turning length: 1000mm, face plate diameter: 420mm, with accessories.
 
Price  
  DE   request
126401743 102

TAKISAWA TC-2 for sale
CNC Lathe


Weight approx.: 3000 kgDimensions (l x w x h) approx.: 2000 x 1250 x 2110 mmDescription: Max. swing diameter 350 mm, max. turning diameter 210 mm, max. Working length 600 mm, control Fanuc Series O-T. Tools are not inclu ...
used machine
 
Weight approx.: 3000 kg
Dimensions (l x w x h) approx.: 2000 x 1250 x 2110 mm
Description: Max. swing diameter 350 mm, max. turning diameter 210 mm, max. Working length 600 mm, control Fanuc Series O-T. Tools are not included.
1991
used machinery auction RESALE 4,000 €  
  CZ   request
126374249 102

SKODA SRM 125/7000 for sale
Heavy Lathes


Type SRM 125/7000 Swing over bed 1250 mm Swing over cross slide 900 mm Distance between centres 7000 mm Max. weight of workpiece 14000 kg Diameter of face plate 1250 mm Max torgue 3159 kpm Spindle speed in 36 step ...

 
Type SRM 125/7000
Swing over bed 1250 mm
Swing over cross slide 900 mm
Distance between centres 7000 mm
Max. weight of workpiece 14000 kg
Diameter of face plate 1250 mm
Max torgue 3159 kpm
Spindle speed in 36 steps
1. row 1,4 - 71 rpm
2. row 6,3 - 315 rpm
feeds in 36 steps
longitudinal feeds 0,125 - 48 mm/r
cross feeds 0,05 - 19 mm/r
main motor 37 kW
weight of the machine 18000 kg
 
Price  
  CZ   request
126401701 102

LOEWE 400/1000 mm for sale
Lathe


 
1,200 €  
  DE   request
126374240 102

MAZAK Quick Turn 28 N for sale
CNC Lathe


X-travel: 200mm, z-travel: 1020mm, max. swing: 510mm, turning diameter: 320mm, turning length: 1010mm, rotational speed: 30-3000/min, number of tool slots: 8, outer tool dimensions: 25x25x150mm, max. inner tool dimension ...
used machine
 
X-travel: 200mm, z-travel: 1020mm, max. swing: 510mm, turning diameter: 320mm, turning length: 1010mm, rotational speed: 30-3000/min, number of tool slots: 8, outer tool dimensions: 25x25x150mm, max. inner tool dimensions: 50mm, rapid traverse x-/ z-travel: 18/ 24m/min, feed rate: 0.001-999.999mm/U, quill stroke: 130mm, chuck diameter: 250mm, controls: MAZATROL T32-2, including chip conveyor.
1990
Price  
  DE   request
126388268 102

MAZAK QUICK TURN NEXUS 200-II MY for sale
CNC Turning- and Milling Center


turning diameter: 380 mmturning length: mmcontrol: MAZATROL total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC lathe with tailstock milling tools and Y-axisCondition: Very well ...
used machine
 
turning diameter: 380 mm
turning length: mm
control: MAZATROL
total power requirement: kW
weight of the machine ca.: t
dimensions of the machine ca.: m
CNC lathe with tailstock milling tools and Y-axis

Condition: Very well preserved
The machine has 1300 spindle hours
Accessories:

Bar loader LNS Servo 3
10 driven holders and various standard holders

Characteristics
Chuck diameter main spindle 8
Max. Swinging diameter 675 mm
Max. Working diameter 380 mm
Max. Bar diameter main spindle 65 mm
Main spindle Max. Speed 5,000 min-1
Motor power 30 min. Operation 26.0 kW
Revolver number of tools 12 (powered tools in all
Stations available)
Milling spindle power (10 min operation) 5.5 kW
Feed rates Travel range X-axis 230 mm
Travel range Y-axis 100 mm
Travel range Z-axis 575 mm
Machine dimensions length 2,665 mm
Width 1,860 mm



This ad was created with MODUL MWS - the software solution of LogoTech.
2011
Price  
    request
126360011 102

SPINNER MT 500/1000 for sale
CNC Turning Machines


Built in 1999 Control Siemens 810 d "Manual-Turn" Swing D-400/D-270 Rapid clamping length 850 mm Three-jaw Chuck SCHUNK Speed 36-3,600 rpm Weight approx. 2,300 kg
used machine
 
Built in 1999
Control Siemens 810 d "Manual-Turn"
Swing D-400/D-270
Rapid clamping length 850 mm
Three-jaw Chuck SCHUNK
Speed 36-3,600 rpm
Weight approx. 2,300 kg
1999
Price  
    request
126388260 102

KAMI DKM 1000.3C - 1 for sale
lathe-conventional-electronic


turning length: 3000 mmturning diameter over bed: 1000 mmturning diameter over slide rest: 705 mmturning diameter in the gap: 1.240 mmspindle bore: 120,0 mmturning speeds: 14 - 857 U/min3-jaw chuck: 400 mmquill:: 6 MKqui ...
used machine
 
turning length: 3000 mm
turning diameter over bed: 1000 mm
turning diameter over slide rest: 705 mm
turning diameter in the gap: 1.240 mm
spindle bore: 120,0 mm
turning speeds: 14 - 857 U/min
3-jaw chuck: 400 mm
quill:: 6 MK
quill travel: 205 mm
spindle nose: D 1-15/MK 6 Comlock
engine output: 11,0 kW
weight: 6.200 kg
range L-W-H: 5.400x1.820x1.800 mm



This ad was created with MODUL MWS - the software solution of LogoTech.
2010
Price  
    request
126359822 102

HWACHEON ECO-5VN R for sale
Lathes


There are two ECO-5VN R available: x-travel: 400mm, z-travel: 720mm, number of tool slots: 6, max. rotational speed: 3000/min, max. chuck diameter: 400mm, control: FANUC 18-T, length: 3600mm, width: 2300mm, including chi ...
used machine
 
There are two ECO-5VN R available: x-travel: 400mm, z-travel: 720mm, number of tool slots: 6, max. rotational speed: 3000/min, max. chuck diameter: 400mm, control: FANUC 18-T, length: 3600mm, width: 2300mm, including chip conveyor and crane.
2003
Price  
  DE   request
126388235 102

VDF-BOEHRINGER 44 D for sale
Centre Lathe


Weight approx.: 1300 kgturning diameter over bed: 440 mmDimensions (l x w x h) approx.: 2500 x 1100 x 1400 mmDescription: VDF-BOEHRINGER 44 D Centre Lathe - inclusive FORKARDT F 250 3-jaw chuck - with adjustable feet and ...
used machine
 
Weight approx.: 1300 kg
turning diameter over bed: 440 mm
Dimensions (l x w x h) approx.: 2500 x 1100 x 1400 mm
Description: VDF-BOEHRINGER 44 D Centre Lathe
- inclusive FORKARDT F 250 3-jaw chuck
- with adjustable feet and two wrenches
- distance between centres: 800 mm
- turning diameter over cranking: 520 mm
- bar capacity: 62,5 mm
1963
used machinery auction RESALE 800 €  
  DE   request
126359820 102

HWACHEON VT 550 L, VT 550 R for sale
Lathes


There are three machines available: (1) 2x Lathe HWACHEON VT 550L: X-travel machine 1/ 2: 725/ 325mm, z-travel: 780mm, number of tool slots: 12, max. rotational speed: 3000/min, chuck diameter: 21mm, control: FANUC, leng ...
used machine
 
There are three machines available: (1) 2x Lathe HWACHEON VT 550L: X-travel machine 1/ 2: 725/ 325mm, z-travel: 780mm, number of tool slots: 12, max. rotational speed: 3000/min, chuck diameter: 21mm, control: FANUC, length: 3000mm, width: 2200mm, including 2x chip conveyor, display of machine 2 was removed (2) 2x Lathe HWACHEON VT 550R: X-travel: 325mm, z-travel: 780mm, number of tool slots: 12, max. rotational speed: 3000/min, chuck diameter: 21mm, control: FANUC, length: 3000mm, width: 2200mm, including chip conveyor.
2008
Price  
  DE   request
126388206 102

GEMINIS GT5 ? G2 1100 x 4000 for sale
CNC Lathe


Weight approx.: 15000 kgturning diameter: 1100 mmcontrol: Fagor 8055 TC / C turning length: 4000 mmDimensions (l x w x h) approx.: 5830 x 3350 x 2700 mmnumber of places for driven tools: 0 number of controlled axles: 2  ...
used machine
 
Weight approx.: 15000 kg
turning diameter: 1100 mm
control: Fagor 8055 TC / C
turning length: 4000 mm
Dimensions (l x w x h) approx.: 5830 x 3350 x 2700 mm
number of places for driven tools: 0
number of controlled axles: 2
toolchanger positions: 8
turning speed range: 150-300-600-1200 rpm
rapid travel range: 8 m/min
longitudinal slide -travel: 4280 mm
cross slide - travel: 550 mm
spindle bore: 104 mm
feed range: 625 / 500 mm/r
Description: CNC controlled Heavy Duty Lathe by GEMINIS GT5 G2-1100 x 4000

Control: by FAGOR 8055 TC / C

Maximum machining 1100 mm in diameter and 4000 mm in length

- Sauter turret with 8 positions
- Center height from flat guide: 615 mm
- Distance between centers: 4 m
- Longitudinal travel: 4280 mm
- Cross travel: 550 mm

- Diameter of the main spindle bore: 104 mm
- Main spindle nose: DIN 55026-11
- Rapid traverse adjustment of the longitudinal slide: 8 m / min
- Rapid traverse adjustment of the cross slide: 8 m / min
- Working feed lengthwise: up to 8000 mm / min
- Working feed transverse: up to 8000 mm / min
- Main engine: 30 kW
- Incl. Röhm lathe chuck 630 mm diameter and chip conveyor + Coolant tank 700 liters (1 bar)

Additional accessories: Leveling feet, clamping jaws, documentation, further details see pictures and PDF
2011
Price  
  DE   request
126359801 102

WEILER LZ 330 for sale
Turning Machines (Lathes)


Precision lathe of manufacturer world market's Hamlet from Herzogenaurach. It is a guide and train spindle lathe LZ 330. The lathe is from a workshop of authorities and is in good condition. The machine has automatic lo ...
used machine
 
Precision lathe of manufacturer world market's Hamlet from Herzogenaurach. It is a guide and train spindle lathe LZ 330. The lathe is from a workshop of authorities and is in good condition. The machine has automatic longitudinal and plan feeds, suitable for thread - metric - inch - module - Diametral-Pitch
 
2,400 €  
    request
126371015 102

GILDEMEISTER CTX 200 S 2 for sale
CNC Lathe - Inclined Bed Type


greates pass round over bed: 440 mmturning length: 350 mmcontrol: Heidenhain CNC Pilot spindle turning speed range: 25 - 5000 U/mintool turret: 12 Posswing diameter over slide rest: 210 mmweight of the machine ca.: 4,2 t ...
used machine
 
greates pass round over bed: 440 mm
turning length: 350 mm
control: Heidenhain CNC Pilot
spindle turning speed range: 25 - 5000 U/min
tool turret: 12 Pos
swing diameter over slide rest: 210 mm
weight of the machine ca.: 4,2 t
dimensions: 3,2 x 2,0 x 2,0 m




This ad was created with MODUL MWS - the software solution of LogoTech.
1999
Price  
    request
126359797 102

GILDEMEISTER Twin 65 for sale
CNC Turning Machines


Turning diameter 175 mm Turning length mm Control - Functionality - construction: slant bed - number spindles 2 - number of turret 2 - driven tools: Yes - number c-axis 2 - number y 1 workspace-ZYLINDRISCH-- swing (max ...
used machine
 
Turning diameter 175 mm
Turning length mm
Control - Functionality - construction: slant bed - number spindles 2 - number of turret 2 - driven tools: Yes - number c-axis 2 - number y 1 workspace-ZYLINDRISCH-- swing (max) 250 mm
-Rotary diameter (max) 175 mm
-Clamping diameter for rod work (max) 62 mm
MAIN spindle - speed range up to 5000 RPM
-Positioning of spindle 360 °
-C axis: Yes counter spindle - spindle bore 65 mm
-Speed range up to 5000 RPM
-C axis: Yes cross-slide - rapid traverse Z 30000 mm / min
-Rapid traverse x 30000 mm / min
-Rapid traverse Y 15000 mm / min
-Tool holders: revolver - number of tool positions (total) 25 - number driven positions 24 tool magazine - number of tool positions 24 electrical connection data - power 75 kVA
-Connection voltage 400 V
-Mains frequency 50 Hz
DIMENSIONS / weights - space left / right 9000 mm
-Space-vorne / rear 4600 mm
-Total height 5200 mm
-Total weight 10000 kg
AUXILIARY equipment turning - loading Magazine: Yes - workpiece Bela de Setup: Yes - workpiece - unloading device: Yes - conveyors: Yes machine equipment
-2 revolver a 12 tool stations
-Bezel SMW SLU1

System incl. (9000 x 4600 x 5200mm)
-Portal feeder (linear)
-Assembly station for flange and shaft parts

Total height machine 2500 mm; incl. charger Tower 5200mm
2003
11,000 €  
    request
126370852 102

EMAG VSC 250 DS for sale
CNC Vertical Lathe


Weight approx.: 10000 kgDimensions (l x w x h) approx.: 4000 x 2400 x 2900 mmDescription: CNC control SIEMENS 840 D Chuck diameter max.: 250 / 400mm Turning Ø: 260 / 420 mm Travel X: 680 / 850 mm Travel Z: 200 / 315 mm ...
used machine
 
Weight approx.: 10000 kg
Dimensions (l x w x h) approx.: 4000 x 2400 x 2900 mm
Description: CNC control SIEMENS 840 D

Chuck diameter max.: 250 / 400mm
Turning Ø: 260 / 420 mm
Travel X: 680 / 850 mm
Travel Z: 200 / 315 mm

Vertical hard turning and finish grinding in one clamping, in one machine. On the workpiece, all parts that can be manufactured reliably by turning are hard finished and only ground where quality and process reliability require it (after hard pre-turning).
Higher workpiece quality and higher productivity, because the workpiece is machined in one clamping. The hard pre-turning leaves a residual of only a few micrometers for the immediately following grinding.
Only a small amount of material is cut during grinding. As a result, the grinding wheel wears only to a small extent and requires less frequent dressing. This results in considerable cycle time advantages. Since only a small extent has to be machined by grinding, the grinding wheel features can be specifically designed for the finishing quality. Thus, for example, surface values in the range Rz <, 1.2 µm can be produced reliably.
Rear faces are difficult to grind due to poor accessibility. This machining task can be solved very easily by hard turning.
2005
used machinery auction RESALE 10,000 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(18)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Heavy Lathes SkodaSRM 125/7000

Type SRM 125/7000 Swing over bed 1250 mm Swing over cross slide 900 mm Distance between centres 7000 mm Max. weight of workpiece 14000 kg Diameter of face plate 1250 mm Max torgue 3159 kpm Spindle speed in 36 steps 1. row 1,4 - 71 rpm 2. row 6,3 - 315 rpm feeds in 36 steps longitudinal feeds 0,125 - 48 mm/r cross feeds 0,05 - 19 mm/r main motor 37 kW weight of the machine 18000 kg

CNC Lathe MAZAKQuick Turn 28 N

X-travel: 200mm, z-travel: 1020mm, max. swing: 510mm, turning diameter: 320mm, turning length: 1010mm, rotational speed: 30-3000/min, number of tool slots: 8, outer tool dimensions: 25x25x150mm, max. inner tool dimensions: 50mm, rapid traverse x-/ z-travel: 18/ 24m/min, feed rate: 0.001-999.999mm/U, quill stroke: 130mm, chuck diameter: 250mm, controls: MAZATROL T32-2, including chip conveyor.

Lathes HWACHEONECO-5VN(R), ECO-5VN(L)

There are two machines available: (1) Lathe HWACHEON ECO-5VN(R): X-travel: 400mm, z-travel: 720mm, number of tool slots: 6, max. rotational speed: 3000/min, max. chuck diameter: 400mm, control: FANUC 18-T, length: 3600mm, width: 2300mm (2) Lathe HWACHEON ECO-5VN(L): X-travel: 400mm, z-travel: 710mm, number of tool slots: 6, max. rotational speed: 3000/min, max. chuck diameter: 400mm, control: FANUC 18-T, length: 3600mm, width: 2300mm, both machines including chip conveyor and crane.

Lathes HWACHEONVT 550 L, VT 550 R

There are three machines available: (1) 2x Lathe HWACHEON VT 550L: X-travel machine 1/ 2: 725/ 325mm, z-travel: 780mm, number of tool slots: 12, max. rotational speed: 3000/min, chuck diameter: 21mm, control: FANUC, length: 3000mm, width: 2200mm, including 2x chip conveyor, display of machine 2 was removed (2) 2x Lathe HWACHEON VT 550R: X-travel: 325mm, z-travel: 780mm, number of tool slots: 12, max. rotational speed: 3000/min, chuck diameter: 21mm, control: FANUC, length: 3000mm, width: 2200mm, including chip conveyor.

CNC lathe OMB TLC OMBAtlc 150

Lathe CNC VERTICAL MODEL TLC 150 '' ELCO CNC OSAI 5010 Oplink DIAMETER OF THE PLATFORM HYDRAULIC 1500 mm MAXIMUM DIAMETER TORRNIBILE WITH POWER EXTERNAL 1750 mm MAXIMUM DIAMETER TORRNIBILE WITH POWER INTERNAL 1850 mm MAXIMUM HEIGHT 1500 mm TURNING RAM STROKE 800 mm NR. 02 RANGES OF SPEED 'CHUCK 0-100 / 0 -350 SPINDLE MOTOR POWER 54 KW MOTOR POWER MILLING 16 KW RANGE CHANGE OR - 3000 Rpm C AXIS. ATTACK ISO 50 TOOL MAGAZINE 16 PLACES CASING TRANSPORTER CHIPS REBUILT MACHINE MECHANICAL AND ELECTRONIC YEAR 2012 VISIBLE IN FUNCTION " THERE IS "

Robot KUKAKR 100-2 HA

OVERVIEW: Brand: KUKA Model: KR 100-2 HA Application type: Robotics Machine type: Robot Availability: Immediately Construction year: 2009 Production hours: 0 Location: Germany Origin country: Germany The cell consists of 3 KUKA KR 100-2 HA with KRC2 controller. Two robots are equipped with arm extension. The TIG welding robot has 2 additional axes for driving the tilt and turn table. The tilt and turn table has a capacity of approx. 1000 kg. The robots are equipped with KUKA Safe Operation V2.1, Motion Cooperation 2.1 (the two on the linear axis) and Touch Sense 1.2. One of the two robots on the linear axis also has two additional axes for controlling the linear axis and the lathe chuck. The linear axis has a length of 8300 mm. Due to a business change of the company the automation cell has never been used and comes with 0 production hours. The cell can also be customized according to your production needs. ADDITIONAL EQUIPMENT: - One of the robots has a fixed Precitec YW 52 F100/250 LLK welding head with cross-jet. The welding head is equipped with a beam splitter module for connecting a Kappa observation camera. - The other two robots are equipped with Schunk quick couplers SWK210 and one with collision and overload protection OPR 131 and can be equipped with various tools. - Further technical data on request.

Get the latest machine offers by email: order newsletter