Category: 102 lathes
Latest update: 09.01.2024 add to watchlist
ankerimg
item-No.: 163114364

used

Seller: FKW Fertigungsmaschinenbau Kilgenstein Wiesen GmbH
Location: Land-de

add to watchlist

Category: 102 lathes
Latest update: 09.01.2024 add to watchlist
ankerimg
item-No.: 163114365

used

Seller: FKW Fertigungsmaschinenbau Kilgenstein Wiesen GmbH
Location: Land-de

add to watchlist

Category: 110 accessories for machine tools
Latest update: 09.01.2024 add to watchlist
ankerimg
item-No.: 163114368

used

Seller: FKW Fertigungsmaschinenbau Kilgenstein Wiesen GmbH
Location: Land-de

add to watchlist

Category: 101 boring mills and machining centers / Vices For Machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163534661

used

check Seller: Surplex GmbH
Location: Nürnberg Land-de
Price: used machinery auction RESALE 60 € add to watchlist

Description: Jaw width 150 mm, clamping depth approx. 200 mm Approx. Onsite Dimension. (l x w x h): 500 x 200 x 300 mm, weight approx.: 35 kg

Category: 102 lathes / Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 159880437

used

check Seller: Kemmerich Werkzeugmaschinen GmbH
Location: ab Lager Monheim am Rhein Land-de

add to watchlist

turning diameter over bed: 280 mm turning diameter over slide: - mm turning length: 500 mm spindle bore diameter: 28 mm turning speed range: 15 - 3100 U/min feeds - longitudinal: 0,016 - 1,14 mm/U feeds - cross: 0,002 - 0,18 mm/U thread - inch: 112 - 4 inch. thread - mm pitch: 0,2 - 7 mm centre height: 140 mm total power requirement: 2,2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,5 x 0,6 x 1,2 m - Forkhardt 3-jaw Chuck F 160 - Chuck guard - Lamp - Tailstock MK 3 - change gears - div tool holders, steels, tailstock tips - collet chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163453106

used

check Seller: Surplex GmbH
Location: Gosheim Land-de
Price: used machinery auction RESALE 450 € add to watchlist

Description: 'Spindle speed: 22 - 2170 rpm Center length: approx. 500 mm Center height above bed: approx. 130 mm Turning diameter over bed: approx. 260 mm Center height above support: approx. 100 mm Turning diameter over support: approx. 200 mm The machine is equipped with a tailstock, a basic holder and a collet system Spindle passage: approx. 20 mm Incl. 2 steady rests' Approx. Onsite Dimension. (l x w x h): 1,300 x 700 x 1,500 mm, weight approx.: 500 kg

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163674253

used

check Seller: Surplex GmbH
Location: Rüsselsheim Land-de
Price: used machinery auction RESALE 125 € add to watchlist

Description: 2 Multifix clamping holders size A, steady rest, max. turning length approx. 250 mm Approx. Onsite Dimension. (l x w x h): 900 x 900 x 1,200 mm, weight approx.: 400 kg

Category: 102 lathes / Bench Lathes For Precision Mechanics
Latest update: 06.11.2023 add to watchlist
approved
dealer
item-No.: 160302705

used

check Seller: Weber Werkzeugmaschinen GbR
Location: Land-de

add to watchlist

Center height: 120 mm Center width: 450 mm Spindle passage/bore: 23 mm Board width: 100 mm Speeds: (12) 180 - 2240 min-1 Travel upper carriage: 140 mm Tailstock mount: MK 2 Quill stroke: 80 mm Motor power: 2.5 kW Connection: 400 V Dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Piercing device Quick release holder System Multifix, size Aa Machine light Coolant device

Category: 102 lathes / Bench Lathes For Precision Mechanics
Latest update: 27.02.2024 add to watchlist
approved
dealer
item-No.: 162185671

used

check Seller: ARSPT GmbH
Location: 4435 Niederdorf Land-ch

add to watchlist

Universal lathe Reiden S250 completely overhauled incl. accessories Preloved lathe in excellent condition has been completely overhauled incl. gearboxes etc. and is sold with some accessories (several bezels, three-jaw lining, etc.). Guides have been completely re-scraped, etc. Machine works and can be visited. We have to give away various accessories free of charge, as we have no use for them after the sale. Lathe has a crank to increase the turning diameter, e.g. when overtightening rims, etc. • Turning diameter above the bed up to 540 mm • Center height 250 mm • Distance between centers 2500 mm • Turning diameter above the face slide 310 mm • Turning diameter in offset 630 mm • Spindle speeds 16 - 1120 rpm • Dimensions L/W/H 3750/1100/1400 mm • Spindle bore 42 mm • Weight approx. 3500 Kg

Category: 102 lathes / Bench Lathes For Precision Mechanics
Latest update: 06.02.2024 add to watchlist
approved
dealer
item-No.: 163302203

used

check Seller: Schrenk Werkzeugmaschinen
Location: 91126 Schwabach Land-de

add to watchlist

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Category: 102 lathes / Bench Lathes For Precision Mechanics
Latest update: 16.02.2024 add to watchlist
item-No.: 163374347
New in: 2020

used

Seller: KNUTH Werkzeugmaschinen GmbH
Location: 24647 Wasbek Land-de
Price: 5.990 € add to watchlist

Key data: 356 mm, 178 mm

technically tested and maintained, with signs of use

Category: 102 lathes / Bench Lathes For Precision Mechanics
Latest update: 12.03.2024 add to watchlist
item-No.: 163533516
New in: 2023

used

Seller: KNUTH Werkzeugmaschinen GmbH
Location: Land-de
Price: 9.900 € add to watchlist

Key data: 356 mm

Basic 180 V is one of the heaviest machines in this popular market segment. With a bed width of 206 mm and a 30 percent higher total weight, their solid construction has a positive effect on the machining quality. - Bed made of cast iron, heavily ribbed - All guides inductively hardened and precision-ground - Main spindle with D1-4" holder, bore Ø 38 mm, guided in 2 adjustable precision tapered roller bearings - All gears made of Cr-Ni steel, hardened, precision ground, running in oil bath - Tailstock can be moved ± 10 mm for taper turning - Guides can be adjusted via wedge strips - With 3-axis position indicator, mounted - Used tracks, technically checked and without defects

Category: 2301 robots
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 163466208
New in: 2003

used

check Seller: Schweikert Automation GmbH
Location: 74722 Buchen Land-de
Price: 7.548 € add to watchlist

KUKA KR 60L30/2 Robot Robot Mechanics Only Year of construction 2003 Load capacity 30kg Reach approx.:2429mm 2 weeks start-up guarantee. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. Free loaded/ex-works. The indicated retail price is exclusive of the statutory VAT of 19%.

Category: 2301 robots
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 163503550
New in: 2017

used

check Seller: Schweikert Automation GmbH
Location: Land-de
Price: 5.498 € add to watchlist

ABB Robotics IRB 140 IRC5 M2004, year 2017 was replacement only mechanics with cables/SMB Number of axles: 6 Max. load capacity: 6 kg Max. working area: 810 mm Year of construction: 2017 Scope of delivery : Robot mechanics with cables and SMB 2 weeks start-up warranty. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. The indicated retail price is exclusive of the statutory VAT of 19%.

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 161199902
New in: 1983

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 1.900 € add to watchlist

Table drill, table drilling machine ALZMETALL type AX 3 T Fabr. No. 3826 Year of construction 1983 Drilling capacity 30 mm Spindle holder MK 3 - long quill Spindle speed 250 - 1600 rpm 5 steps projection 250 / 290 mm Pinol stroke 120 mm Table size 400 x 300 mm Distance spindle-table top max. 700 mm Column diameter 115 mm Motor power 0.75 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 5 V-belt stages - Drill head height adjustment via hand crank approx. 450 mm (column extends downwards through the table top) - Emergency stop button quick-change drill chuck ALBRECHT 1-13 mm Space requirement L x W x H 900 x 600 x 1400 mm Weight 185 kg good condition; used

Category: 102 lathes / High Precision Turning Machines (Lathes)
Latest update: 05.10.2023 add to watchlist
approved
dealer
item-No.: 27089925

used

check Seller: Müller-Maschinen AG
Location: Deitingen Land-ch
Price: 16.000 € add to watchlist

Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!

Category: 102 lathes / High Precision Turning Machines (Lathes)
Latest update: 05.10.2023 add to watchlist
approved
dealer
item-No.: 38841289

used

check Seller: Müller-Maschinen AG
Location: Deitingen Land-ch
Price: 7.700 € add to watchlist

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

Category: 102 lathes / High Precision Turning Machines (Lathes)
Latest update: 05.10.2023 add to watchlist
approved
dealer
item-No.: 42912571
New in: 1959

used

check Seller: Müller-Maschinen AG
Location: Deitingen Land-ch
Price: 7.800 € add to watchlist

Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817300

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm Taper in tailstock:: 2 MT longitudinal: Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Knee-operated reversing switch Clutch and brake Lamp Quick closing attachment Chip protector Toolholders

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817447

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: W25 number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Feeds: Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 2200 mm Width: 800 mm Height: 1650 mm Various accessories: On work bench: Working bench: Length: 2150 mm Width: 770 mm Height: 900 mm Driving system for milling and grinding attachment 3-jaw chuck diameter: 100 mm Set of jaws hard Drilling tailstock Chip protector

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817558

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Drilling tailstock

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817630

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 900 mm Height: 1500 mm Various accessories: Working bench: Length: 2000 mm Width: 1000 mm Height: 900 mm Rear drive Pneum. quick closing attach. Cross slide CNC: COMBITEC E-600

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817643

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 210 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 200 kg Overall dimensions machine: Length: 2500 mm Width: 800 mm Height: 1300 mm Various accessories: Working bench: Length: 2000 mm Width: 700 mm Height: 900 mm Driving plate Drilling tailstock Drill chuck Fixed steady

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218007

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Technical data Centre height: 102 mm Distance between centres: 350 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1300 mm Width: 600 mm Height: 1300 mm Various accessories: pedal-operadet reversing switch 2 drawers Stepless speed variator Coolant system Lamp Headstock with reduction gear Quick closing attachment Cross slide with 90 mm stroke

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218067

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 45 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Base-mounted type:: 102-82.000 2 drawers Stepless speed variator Headstock with reduction gear Driving plate Adjustable tailstock Drill chuck Cross slide with 90 mm stroke Fixed steady

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
LEINEN 3rd category level
  • LEINEN engine lathes (sliding, surfacing and screw cutting lathes) (1)
  • LEINEN turning machines (lathes) (2)
  • LEINEN vices for machines (1)
 
RESALE used machinery 25 years online