Category: 203 planing machines
Latest update: 09.01.2024 add to watchlist
approved
dealer
item-No.: 19090493
New in: 1982

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 1.460 € add to watchlist

Koelle edge planing machine model FKF 51 is in good condition, ready to use. L x W x H = 3000 mm x 700 mm x 950 mm Weight approx. 200 kg Built in 1982 Engine No. 390 The rubber rings at the pressure rollers should be times replaced. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 202 milling machines / Spindle moulders
Latest update: 10.11.2023 add to watchlist
approved
dealer
item-No.: 106845641

used

check Seller: W&T EFRA
Location: Philippsburg Land-de
Price: VB 1.250 € add to watchlist

Konturfrä�maschine crosscut saw with sliding table Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Height adjustment: Handwheel Power: 6kW Circular saw, crosscut saw Machine is fully functional. Machine is in good condition. We love to hear from you.

Category: 202 milling machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 162600565

used

check Seller: Bödeker Holzbearbeitungsmaschinen GmbH
Location: Land-de

add to watchlist

Konturfrä�maschine crosscut saw with sliding table Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Height adjustment: Handwheel Power: 6kW Circular saw, crosscut saw Machine is fully functional. Machine is in good condition. We love to hear from you.

Category: 210 window production machines / Cutting machines for pins
Latest update: 09.03.2024 add to watchlist
approved
dealer
item-No.: 162929455
New in: 1983

used

check Seller: Ermaier Holzbearbeitungsmaschinen
Location: Land-de
Price: 1.250 € add to watchlist

KÖLLE Z40 YOC 1983 Rated Current: 20A Milling machine: Motor power: 7.5 kW Speed: 4,000 rpm. 40 mm spindle Clamping height: approx. 190 mm Height adjustment via handwheel (travel: 80 mm) Saw: Motor power: 2.2 kW Speed: 3,000 rpm. 30 mm spindle max. saw blade diameter: 400 mm max. cutting height: 120 mm Sliding carriage eccentric. Workpiece clamping Length fence: 290cm can be swivelled on both sides (up to 45°) Suction connection: 160 + 80 mm Engine Brake Weight: approx. 700 kg Stop ruler available. Machine dimensions with folded table as shown: L: 200 cm W: 130 cm H: 161 cm Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

Category: 105 saws / Vertical Bandsaws
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794715

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Vert. Band saw for metal make KÖLLE type R 40Machine -No: 44Technical specifications:Roll diameter: 400 mmProjection: 390 mmStepless belt speed: 16 - 2200 m / min.Cutting height: 300 mmTable size: 600 x 560 mmWeight approx: 450 kgExternal dimensions approx .: 1000 x 750 x 2000 mmWith- Bandsaw butt welder Ideal BS 016- grindstone- Scissorsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 203 planing machines / Thicknessing machines
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 159861156
New in: 2000

used

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 8.900 € add to watchlist

Key data: 630 , 225

Kölle thickness planer DH 63 Product name: Thickness planer Type: DH 63 Manufacturer: Kölle Machine number: 888 Year of construction: 2000 Condition: used technical details: • Planing width: 630 mm • min. planing height: 4 mm • planing height: 225 mm • Largest chip depth: 8 mm • Length of the thickness table: 1,000 mm • Shortest workpiece length: 260 mm • Diameter of the knife shaft: 125 mm • Speed of the knife shaft: 5,000 rpm • Number of planing knives: 4 pieces • Feed speeds: 4/6/12 m/min • Weight: approx. 1,020 kg • Electronic positioning control e.g. adjustment of the thickness table • Sliding roller in the table Electrical equipment: • Voltage: 400 V • Power knife shaft motor: 7.5 kW • Power feed motor: 0.75 kW • Power motor for thickness table adjustment: 0.18 kW Suction: • Diameter suction nozzle: 160 ...

Category: 202 milling machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162598419
New in: 1990

used

check Seller: Bödeker Holzbearbeitungsmaschinen GmbH
Location: Land-de

add to watchlist

Manufacturer: Kölle Tischfräse, Type: F 50, Year: 1990, Control: oben, revolutions rpm: 3000/6000/9000, Length lifting spindle mm: 150, Diameter of the spindle mm: 30, Spindle travel range total mm: 120, Spindle swivel-mounted max Grad: no, Main engine kW: ca.4, Feeding speed: yes, Table extension - lenght: yes, Exhaust diameter mm: 150, Wight approx. kg: ca.900, FREE TEXT: Anschlag ausziehbar/Haffner Vorschub, Year :1990

Category: 203 planing machines / Surface planing machines
Latest update: 20.03.2024 add to watchlist
approved
dealer
item-No.: 163533519
New in: 1997

used

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 4.250 € add to watchlist

Key data: 500 mm, 2800 mm, 4 St.

Technical details: - Max. planing width: 500 mm - Maximum chip depth: 5 mm - Length of feed table: 1,300 mm - Length of the take-off table: 1,500 mm - Total length of the table: 2,800 mm - Table height: 800 mm - Max. workpiece length without support: approx. 1.5 m - Length of the joining fence (Aigner joining fence with integrated auxiliary fence): 1,300 mm - Height of the joining stop: 150 mm - Joining stop adjustable up to 45° and extendable over the entire width of the table - Diameter of the TERSA knife shaft: 125 mm - Nominal speed of the TERSA knife shaft: 5,000 rpm - Number of planer blades: 4 pieces - Minimum width of planer blades: 17 mm - Diameter of suction nozzle: 160 mm - Required air velocity: min. 20m/s - Required air volume: 1500 m³/h - Vacuum at 20m/s air velocity: 705 Pa - 6 x machine shoes with adjustment screws - incl. EMERGENCY STOP switch En ...

Category: 201 saws / Joiners circular saws
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163674565
New in: 1997

used

check Seller: Surplex GmbH
Location: Kernen-Stetten Land-de
Price: used machinery auction RESALE 2.000 € add to watchlist

Description: Speeds 2800,3500,4200,5200 rpm Large head laser , Voltage 400 volts , Frequency 50 Hertz , Current consumption 20 amps , Motor power 5.5 kW , Factory number 4106 Included: Saw blades example: 350x3.6x30 mm, 350x3.2x30 mm Contents of the cabinet have a look at the video and the PDF of the machine main motor: 5.5 kW, parallel limit stop: Yes, table length: 1,100 mm, swival range +/-: 0-45 °, Approx. Onsite Dimension. (l x w x h): 3,000 x 2,500 x 1,700 mm, weight approx.: 1,050 kg

Category: 101 boring mills and machining centers
Latest update: 08.12.2023 add to watchlist
approved
dealer
item-No.: 66763010
New in: 1975

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 190 € add to watchlist

Slot boring machine Scheer L x W x H: 70 x 60 x 140 cm Weight approx. 400 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 01.08.2023 add to watchlist
approved
dealer
item-No.: 150995373

used

check Seller: HZB-Maschinenhandel Maschinenteufel
Location: 3241 Kirnberg an der Mank Land-at

add to watchlist

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 20.12.2023 add to watchlist
approved
dealer
item-No.: 152812813

new

check Seller: WEIBERT maschinen
Location: 63768 Hösbach - Rottenberg Land-de

add to watchlist

WEIBERT WJ-LB2 Long-hole drilling machine WEIBERT WJ-LB2 400V 2.2 KW ( 3 hp) n=2840 min. Drilling table size 600x320mm Drilling table height 870mm Drilling depth 245mm Drilling width 205mm Height adjustment 165mm Swivel ling unit swivel -45°/90°/+45° Machine table made of GREY ING! Manual adjustment with handwheel! AGGREGAT AND TABLE FROM MACHINE GREY!!! G&WJ-LB2 option: Dowel drilling device available with pitch 16-22-25 and 32mm G&WJ-LB-DÜBEL

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 17.12.2023 add to watchlist
approved
dealer
item-No.: 158614403
New in: 2022

used

check Seller: Optimall, s.r.o.
Location: 06001 Kežmarok Land-sk
Price: 3.650 € add to watchlist

New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 17.12.2023 add to watchlist
approved
dealer
item-No.: 158727317
New in: 2022

used

check Seller: Optimall, s.r.o.
Location: 06001 Kežmarok Land-sk
Price: 4.800 € add to watchlist

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 01.08.2023 add to watchlist
approved
dealer
item-No.: 160238515
New in: 1999

used

check Seller: HZB-Maschinenhandel Maschinenteufel
Location: 3241 Kirnberg an der Mank Land-at

add to watchlist

-) 2-jaw drill chuck 20 mm -) Dowel drilling device with 4-compartment grid 16-32-22-25 mm -) 90° frame stop pluggable -) Miter stop 45° and 22.5° pluggable -) Moving equipment -) Workpiece clamp manual 2 pieces -) Suction connection D 100 mm Optional accessory: -) Gauge in handwheel -) infinitely variable double angle miter stop -) 1 lever operation -) switchable pneumatic stroke for two planes -) Leaser on request

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 160764919

used

check Seller: fwb-Maschinenhandel GmbH
Location: Land-de
Price: 950 € add to watchlist

Long-hole drilling machine Height adjustment of the drilling support by hand wheel Deep movement of the drilling support by hand lever Lateral movement of the table by hand lever Table size 690 mm x 300 mm Chuck 3-16 mm Maximum drilling depth 150 mm With many drills Dimensions 1100 mm x 700 mm x H 1200 mm Weight 412 kg

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 19.01.2024 add to watchlist
approved
dealer
item-No.: 161000571

used

check Seller: MELCHIOR MASCHINEN E.K.
Location: 37120 Bovenden Land-de

add to watchlist

double-sided long-hole drilling machine with automatic duty cycle, maximum working width / stroke length of oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20°, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 strokes per minute, pneumatic workpiece clamping, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and optically in very good condition

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 25.09.2023 add to watchlist
approved
dealer
item-No.: 161007503

used

check Seller: A1 Machines BV
Location: 7468 ENTER Land-nl
Price: VB 1.250 € add to watchlist

HofmannLangloch drill Brand Hofmann Type LL150 Year of construction Specifications: drilling depth max. 145 mm (drill head movement) Drilling length: max. 230 mm (table movement) Vertical drilling spindell run max.135 mm Drilling: Drilling depth limitation Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Motor power 1.3 kW Chuck 5 - 20 mm Condition: functionally tested

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 16.12.2023 add to watchlist
approved
dealer
item-No.: 161618953
New in: 2004

used

check Seller: Tischlerei Bracht GbR
Location: Land-de
Price: 7.300 € add to watchlist

Universally applicable frame and slotted hole drilling machine Especially for window construction and universal use through pneumatic height adjustment Double-hole drilling on two levels in one clamping operation Motor power 1.5 kW Starting the engine with a practical handle switch With two-jaw chuck 1 - 20mm from Röhm Pneumatic adjustment of the processing height, dowels on two levels without moving. The desired drilling heights can be set for each drilling level with a digital counter, and switching is then carried out pneumatically from the front Transverse adjustment 430mm, infinitely variable or in 12mm increments Maximum height adjustment approx. 100mm above table height Drilling stroke approx. 150mm 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in 12mm grid Stop for longitudinal adjustment during slotted hole milling 2 swivelling workpiece  ...

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 27.02.2024 add to watchlist
approved
dealer
item-No.: 161619030
New in: 1993

used

check Seller: Tischlerei Bracht GbR
Location: Land-de
Price: 5.800 € add to watchlist

Rung and slotted hole drilling machine T 140 with angle adjustment Special drilling machine for staircase construction, window construction. Oblique dowels and picket holes can be easily realized thanks to the rotatable drilling unit. Motor pole switchable, two speeds Motor power 1.4 / 1.8 kW, 1380 / 2810rpm Starting the engine with a practical handle switch Röhm two-jaw chuck up to 20mm capacity Linear laser for exact positioning of the workpiece Drilling unit can be rotated 63 degrees to the left and right The desired drilling height can be adjusted with a hand crank and digital counter Transverse adjustment approx. 320mm, infinitely variable Maximum height adjustment approx. 60mm above table height Drilling stroke approx. 140mm 2 pneumatic workpiece clamps Chassis Pressure rubbers renewed Few paint spots repaired Dimensions approx. 1180 x 1000 x 1250mm (LxWxH), ...

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 161723408
New in: 1998

used

check Seller: Mercator S.R.L.
Location: Land-it

add to watchlist

SPECIFICATIONS: Suitable for processing backrests Number of spindles: 06 Speed: 10,000 rpm variable Max. machining depth: 50 mm Bending radius of the working table min - max: 300 - 900 Pneumatic workpiece clamping

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 162197498
New in: 1996

used

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 7.250 € add to watchlist

Hoffmann frame and slotted hole drilling machine Product name: Frame and slotted hole drilling machine Type: HR 150 Manufacturer: Hoffmann Bohrsysteme Machine number: 15306 Year of construction: 1996 Condition: used, revised, checked Technical details: - Machine height: 1,260 mm - Machine length: 1,100 mm - Machine depth: 1,300 mm - Workpiece support: 1,100 x 240 mm - Workpiece clamping: pneumatic via foot valve - max. clamping height: 150 mm (standard) - Stroke of the clamping cylinders: 10 mm - Drilling plane adjustment (Z-axis): 100 mm (pneumatic) - Drilling stroke (Y-axis): 150 mm - lateral adjustment range of the drilling unit (x-axis): 330 mm - Drill holder: Special chuck with 2 tool change inserts (1x M10 and 1x 1600) - Drill with centering tip: - 2 pieces 8 x 50 mm, 1 piece 12 x 80 mm, 1 piece slotted hole drill 8 x 20 mm - Drill speed: 2,850 rpm -  ...

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 27.02.2024 add to watchlist
approved
dealer
item-No.: 162351347
New in: 1992

used

check Seller: Tischlerei Bracht GbR
Location: Land-de
Price: 3.800 € add to watchlist

Frame and slotted hole drilling machine with pneumatic height adjustment and pneumatic feed Double-hole drilling on two levels in one clamping operation Motor power 2.2 kW With two-jaw chuck 1 - 20mm Pneumatic adjustment of the processing height, dowels on two levels without moving. Transverse adjustment approx. 280mm, infinitely variable or in 18/20/22/25mm increments Drilling stroke approx. 120mm Pneumatic drill feed can be controlled via foot pedal, spinning possible 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in the grid Stop for longitudinal adjustment during slotted hole milling Suction connection 80mm A few paint spots dabbed Very good condition, see original photos. Dimensions approx. 1000 x 850 x 1300mm (LxWxH), weight 250kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstrat ...

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 09.03.2024 add to watchlist
approved
dealer
item-No.: 162879711
New in: 1989

used

check Seller: Ermaier Holzbearbeitungsmaschinen
Location: Land-de
Price: 3.450 € add to watchlist

PANHANS 116 YOC 1989 Motor power: 1.5 kW (380V) 2 lever operation max. drilling depth: 130 mm max. drilling length: 240 mm Height adjustment: 135 mm Height adjustment by handwheel via scale Dowel pitch: 16 / 22 / 25 / 32 mm Miter ruler (adjustable) 1 eccentric Workpiece clamping Table size: 520 x 290 mm (basic size) Table extension L+R (support area: 800 x 400 mm) Suction connection: 100 mm Weight: approx. 220 kg

Category: 205 boring mills, machining centers / Slotted hole drill presses
Latest update: 22.12.2023 add to watchlist
approved
dealer
item-No.: 162998738
New in: 1994

used

check Seller: Tischlerei Bracht GbR
Location: 40764 Langenfeld Land-de
Price: 4.700 € add to watchlist

Slotted hole drilling machine with pneumatic height adjustment Duggle hole drilling on two levels in one clamping Motor power 1.5 kW With Röhm two-jaw chuck 1 - 20mm Pneumatic adjustment of the machining height by foot pedal, dowels on two levels without repositioning. Transverse adjustment approx. 240mm, infinitely variable or in 16/22/25/32mm increments Maximum height adjustment approx. 135mm Drilling stroke approx. 145mm Table size approx. 700 x 380mm pneumatic workpiece clamp Fixed stop and adjustable angle stop from +45 to -45 degrees Grid rail for quick adjustment on the side of the grid Driving equipment Extraction connection Parts repainted Pressure reducer renewed Dimensions approx. 950 x 1200 x 1300mm (LxWxH), weight 320kg. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
KöLLE 3rd category level
  • KöLLE cutting machines for pins (1)
  • KöLLE joiners circular saws (1)
  • KöLLE spindle moulders (1)
  • KöLLE surface planing machines (1)
  • KöLLE thicknessing machines (1)
  • KöLLE vertical bandsaws (1)
 
RESALE used machinery 25 years online