used KUGELMANN Grass mowing machines

Lawn Sweeper for PTO 540 rpm, working width 180 cm, double Sweeper roller system, hydraulic high dump, electrical. Remote control acting on solenoid valves, ew 1 hydraulic connection required. Tank contents approx. 3 m ³, rear axle 6 x frosted. Drawbar adjustable in height, illumination device com. StVZO. Machine is relatively little used, brushes and Tin in good condition with paint defects inside the tank and signs of use. Incl. operating instructions, parts list, and ABE. Type same Kugelmann KDH 150 (150 cm working width) also available and more with working widths from 90 to 170 cm. -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Hörger SKU 1500 Artificial Grass Cleaning Device Artificial Grass Cleaner SKU for sand-filled or granule-filled artificial grass. The artificial turf cleaner consists of a cleaning attachment in the front attachment and a tank-pump unit in the rear attachment. The rear tank is divided into a fresh water and a dirty water area. The PTO-driven high-pressure pump sucks in the fresh water and transports it via hoses to the front of the front cleaning attachment. Due to the large working brush diameter of 500 mm, the machine can be used for three different working procedures are carried out. 1. Maintenance cleaning: Depending on weather conditions, every 14 days to monthly; Coarse dirt and dust that has settled in the meantime as well as pole abrasion are removed. 2. Intensive cleansing with loosening: About every 3 months; Coarse dirt is removed, fine particles consis ...

Hörger SKU 1500 Artificial Grass Cleaning Device Artificial Grass Cleaner SKU for sand-filled or granule-filled artificial grass. The artificial turf cleaner consists of a cleaning attachment in the front attachment and a tank-pump unit in the rear attachment. The rear tank is divided into a fresh water and a dirty water area. The PTO-driven high-pressure pump sucks in the fresh water and transports it via hoses to the front of the front cleaning attachment. Due to the large working brush diameter of 500 mm, the machine can be used for three different working procedures are carried out. 1. Maintenance cleaning: Depending on weather conditions, every 14 days to monthly; Coarse dirt and dust that has settled in the meantime as well as pole abrasion are removed. 2. Intensive cleansing with loosening: About every 3 months; Coarse dirt is removed, fine particles consis ...

Collecting basket, collecting container, mower, lawn mower, cutter bar, disc mower -without fan -for side discharge -Dimensions: 1500/800/H1400 mm -Weight: 100 kg

Description: Battery type: Lithium Ion Battery voltage 7.2 V Battery capacity 1.3 Ah Charging time (low battery) 3-5 hours Hedge cutting: Cutting length 120 mm Hedge cutting: Cutting width 6 mm Grass cutting: Cutting width 83 mm Approx. Onsite Dimension. (l x w x h): 250 x 200 x 200 mm, weight approx.: 10 kg

Description: Battery type: Lithium Ion Battery voltage 7.2 V Battery capacity 1.3 Ah Charging time (low battery) 3-5 hours Hedge cutting: Cutting length 120 mm Hedge cutting: Cutting width 6 mm Grass cutting: Cutting width 83 mm Approx. Onsite Dimension. (l x w x h): 250 x 200 x 200 mm, weight approx.: 10 kg

Description: Battery type: Lithium Ion Battery voltage 7.2 V Battery capacity 1.3 Ah Charging time (low battery) 3-5 hours Hedge cutting: Cutting length 120 mm Hedge cutting: Cutting width 6 mm Grass cutting: Cutting width 83 mm Approx. Onsite Dimension. (l x w x h): 250 x 200 x 200 mm, weight approx.: 10 kg

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

Gear testing machine with chart recorder and electric drive manufacturer: unknown machine is designed for the inspection of gears accessories various module pins and mandrels has various hand cranks and adjustable settings and also an electric drive, with chart recorder you can see various rashes. in the camp under current vorfuehrbar, unfortunately no manual available. Are sold without any warranty

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Make : TREPKO Model : PKG 1S Cups : 8 Circles pre Minute : 32-40 Cup Sizes : 75 and 95mm Filling Volume : 50gr -500gr Stations : Cup denester - Filling - Aluminium Placing - Heat Sealing - Conveyor Condition : Good HEPA Filter Mounted Closed Cabin Safety Switches Control Panel Available : Immediately

Cup filling and sealing machine 67/95mm YOM 2014. As new, Only been used for a week.

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Flexipak Refurbished 3 years ago Speed : 1800 c/h on 125 g Cup dimensions : 73mm and 95 mm Comprises pot drop, liquid fill, lid drop, heat seal, over lidder Motorised 3 metre conveyer Heated 30 litre feed tank with stirrer.

Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good

Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK

Make: AMPACK, Type: Round filler ARL 8/3 Cup diameter 95mm Machine No.: 783 (0783000C) Year of construction: 1993, Commissioning 09/1994 - Control: year 2021, New built on Siemens S7 with encoder. - Slip-on lid station: 2008 NEW - All three fillers completely renewed 2022 !! Inclusive: - Sterile air module for laminar flow - Tray packer AMPACK - Tray erector A&F, for trays of 20 and 12 - Fruit mixing station (3x) - Various conveyors comple line in very good care!! Dismantling by the buyer or etra charges