Category: 302 extruders / Double screw-type extruding machine
Latest update: 19.09.2023 add to watchlist
approved
dealer
item-No.: 161084706

used

check Seller: PLASTICO TRADING GmbH & Co.KG
Location: Land-de

add to watchlist

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled**) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal. ...

Category: 302 extruders / Extruding lines
Latest update: 12.04.2023 add to watchlist
approved
dealer
item-No.: 161235089
New in: 2002

used

check Seller: POL-SERVICE JACEK MAJCHER
Location: 35-31 Rzeszów Land-pl
Price: 54.000 € add to watchlist

Krauss Maffei KMD120 extruder - efficient - year of manufacture 2002 - Screw diameter: 120 mm parallel - L/D: 23 - capacity: 600 - 700 kg/h - the scope of general renovation in 2011 carried out in our company - new AC 90 kW motor, controlled by a new vector inverter - new control cabinet equipped with new heaters, new housings, new fans, - new thermoregulation cabinet equipped with SSR + new regulators - new plasticizing system, - number of heating zones: cylinder (5), connector (1), head (3) - reducer after reconditioning - drive synchronization system: extruder, dispenser - equipped with a pressure and temperature sensor. -Dimensions; length x width x height = 530*160*170cm + hopper - Extrusion axis 1200mm

Category: 1402 other machines for mechanical handling
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162816714

used

Location: Land-de

add to watchlist

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit, double hydraulic pump -Double hydraulic pump: from injection molding machine KHS Krauss Maffei KM 1000-5000A -Pump 1: Voith type IPH 6/5-125/50 300 bar - Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher type? -Individual components: filters/valves see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Category: 301 injection moulding machines
Latest update: 12.10.2011 add to watchlist
item-No.: 555029
New in: 1998

used

Seller: Tecplast e. K. Machinery
Location: Land-de

add to watchlist

Krauss Maffei hose pouring machine type: KM 110-700 C1 control: MC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 110 cross-beam measures mm: 470 installation height min / max. mm: min 300 record sizes: 745 x 770 hose unity snail diameter mm: 50 hose weights gr: 343 hose volumes cm?: 377 hose pressure cash: In 1892 mass and weights dimensions LxBxH m: 4.6 x 1.4 x 2.1 machine weights kg: 7000 other 2 x nuclear train, accumulator, new hydraulic tubes, Hydromotor anew. Heisskanal 4 zones

Category: 301 injection moulding machines
Latest update: 25.12.2012 add to watchlist
item-No.: 2215528
New in: 1993

used

Seller: Tecplast e. K. Machinery
Location: Germany Land-de

add to watchlist

Krauss Maffei hose pouring machine type: KM 650-4350 BM, with Robo control: MC 3 construction year: In 1993 Schliesseinheit Schliesskraft t: 650 opening ways mm: In 1750 cross-beam measure mm: 1000 x 900 installation heights min / max. mm: 600 record size: 1430 x 1350 hose unity snail diameter mm: 85 hose weights gr: In 1965 hose volumes cm?: 2195 hose pressure cash: In 1993 mass and weights dimensions LxBxH m: 12.5 x 2.50 x 2, 3 machine weights kg: 35.000/12.000 other Neureder robot

Category: 301 injection moulding machines
Latest update: 08.11.2013 add to watchlist
item-No.: 5097591
New in: 1999

used

Seller: Tecplast e. K. Machinery
Location: Mülheim an der Ruhr Land-de

add to watchlist

Product: injection molding machine Rubric: injection moulding machines Make/model: Krauss Maffei KM 320-1900 C3 Year of construction: 1999 Krauss Maffei injection moulding machine Type: KM 320-1900 C3 control: MC4 year: 1999 Clamping unit Clamping force t 320 Gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 Injection unit Screw diameter mm: Gr 70 injection weight: 954 Injection volume cm m³: 1048 Spray pressure bar: 1778 Dimensions and weights Dimensions Lxwxh m: 6.75 X 2.15 X 2.4 machine weight kg: 16,300 Miscellaneous C3 SYSTEM EUROMAP 12 interface

Category: 301 injection moulding machines
Latest update: 18.03.2014 add to watchlist
item-No.: 5097593
New in: 2004

used

Seller: Tecplast e. K. Machinery
Location: Mülheim an der Ruhr Land-de

add to watchlist

Make/model: Krauss Maffei KM 450-3500 C3 Year of construction: 2004 Krauss Maffei injection moulding machine Type: KM 450-3500 C3, ACCU control: MC4 year: 2004 Clamping unit Clamping force t 450 Gap mm: 1170 Holm dimension mm: 900 x 800 min/max height mm: 480 Plate size: 1270 x 1230 Injection unit Screw diameter mm: 80 Injection weight gr: 1544 Injection volume cm m³: 1754 Spray pressure bar: 2205 Dimensions and weights Dimensions Lxwxh m: 7.98 x 2.35 x 2.55 machine weight kg: 26,000 Miscellaneous C3 system EUROMAP 12 interface

Category: 301 injection moulding machines
Latest update: 13.01.2015 add to watchlist
item-No.: 5097595
New in: 1992

used

Seller: Tecplast e. K. Machinery
Location: Mülheim an der Ruhr Land-de

add to watchlist

Krauss Maffei injection moulding machine Type: KM 650 / 8000 BM control: MC 3 year: 1992 Clamping unit Clamping force t 650 Gap mm: 1150 Holm dimension mm: 1000 x 900 min/max height mm: 600 / -. Plate size: 1430 x 1350 Injection unit Screw diameter mm: Gr 115 injection weight: 4345 Injection volume cm m³: 4830 Spray pressure bar: 1656 Dimensions and weights Dimensions Lxwxh m: 13.1 x 3.1 x 2.4 machine weight kg: 52,000

Category: 301 injection moulding machines
Latest update: 06.08.2014 add to watchlist
item-No.: 5958054
New in: 1993

used

Seller: Tecplast e. K. Machinery
Location: Bayern Land-de

add to watchlist

Krauss Maffei injection moulding machine Type: KM 800 / 4350 BM, with Neureder robot control: MC 3 year: 1993 Clamping unit Clamping force t 800 Gap mm: 1245 Holm dimension mm: 1000 x 900 min/max height mm: 705 /. Plate size: 990 x 1380 injection unit Screw diameter mm: 85 Injection weight gr: 1965 Injection volume cm m³: 1820 Spray pressure bar: 2185 Dimensions and weights Machine weight kg: 38,000/12,000 Other 2 core pull, Neureder robot system

Category: 301 injection moulding machines / Injection molding machines
Latest update: 30.05.2019 add to watchlist
ankerimg
item-No.: 12375858
New in: 2002

used

Seller: Tecplast e. K. Machinery
Location: NRW, Mülheim Land-de

add to watchlist

Krauss Maffei injection moulding machine Type: KM 280-1400 C3 control: MC 4 year of construction: 2002 Clamping unit Clamping force t 280 gap mm: 820 Holm dimension mm: 630 x 630 min/max height mm: 330 Plate size: 995 x 1050 injection unit Screw diameter mm: Gr 60 injection weight: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.1 x 2.2 x 2.3 machine weight kg: 14,200 Miscellaneous 1 core pulling robot interface battery Highspeedmachine

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 30.05.2019 add to watchlist
item-No.: 17824745
New in: 1997

used

Seller: Tecplast e. K. Machinery
Location: NRW Land-de

add to watchlist

Krauss Maffei injection moulding machine Type: KM 650-3500 C2 control: MC 3F built: 1997 Clamping unit Clamping force t: 650 gap mm: 1150 Holm dimension mm: 1000 x 930 min/max height mm: 600 / 1750 Plate size: 1510 x 1370 injection unit Screw diameter mm: 90 injection weight gr: 2605 Injection volume cm 3: 1777 spray pressure bar: 1742 Dimensions and weights Dimensions Lxwxh m: 10 x 2.8 x 2.7 machine weight kg: 35,000 Miscellaneous Core pull 4 EUROMAP 12

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 03.08.2015 add to watchlist
ankerimg
item-No.: 17824847
New in: 2000

used

Seller: Tecplast e. K. Machinery
Location: NRW Land-de

add to watchlist

Krauss Maffei injection moulding machine Type: KM 320-1400 C3 control: MC4 year: 2000 Clamping unit Clamping force t: 320 gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 injection unit Screw diameter mm: 60 injection weight gr: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.8 x 2.2 x 2.4 machine weight kg: 16,300

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 30.05.2019 add to watchlist
ankerimg
item-No.: 17824851
New in: 2000

used

Seller: Tecplast e. K. Machinery
Location: NRW Land-de

add to watchlist

Krauss Maffei injection moulding machine Type: KM 280-1400 C3 battery control: MC4 year: 2000 Clamping unit Clamping force t: 280 gap mm: 820 Holm dimension mm: 630 x 630 min/max height mm: 330 Plate size: 995 x 1050 injection unit Screw diameter mm: 60 injection weight gr: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.1 x 2.2 x 2.3 machine weight kg: 14,200 Miscellaneous 1 core pulling Euromap12, battery

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 30.05.2019 add to watchlist
ankerimg
item-No.: 17824855
New in: 1999

used

Seller: Tecplast e. K. Machinery
Location: NRW Land-de

add to watchlist

Krauss Maffei injection moulding machine Type: KM 180-1000 C3, battery control: MC 4 year of construction: 1999 Clamping unit Clamping force t: 180 gap mm: 700 Holm dimension mm: 560 x 560 min/max height mm: 600 Plate size: 915 x 915 injection unit Screw diameter mm: 55 injection weight gr: 476 Injection volume cm 3: 523 spray pressure bar: 1904 Dimensions and weights Dimensions Lxwxh m: 5.6 x 1.9 x 2.2 machine weight kg: 9,700 Miscellaneous new pump 2013 Euromap12 battery

Category: 301 injection moulding machines / Multi component injection moulding machines
Latest update: 23.11.2023 add to watchlist
approved
dealer
item-No.: 121653239
New in: 2009

used

check Seller: TMS CO.,LTD
Location: Land-kr

add to watchlist

Krauss Maffei bi-material KM1600/12000/8100 MX -Clamping force : 1300 ton -Manufactured year : 2007~2009 -Quantity : 12 units

Category: 301 injection moulding machines / PET Preforming machines
Latest update: 23.11.2023 add to watchlist
approved
dealer
item-No.: 148109490
New in: 2010

used

check Seller: TMS CO.,LTD
Location: Land-kr

add to watchlist

KRAUSS MAFFEI KM450-4500 CS PET (450 ton) year `2010 for PET preform Location : Korea

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 25.03.2024 add to watchlist
item-No.: 148348389
New in: 1999

used

Seller: alesco GmbH
Location: Land-de

add to watchlist

Krauss Maffei KM 50 / 160 C2 Operating hours approx. 47,500 Core train Operational data collection (function uncertain, was not used by us) Various power connections Screw diameter D=30mm Condition: good / Ready to use without funnel

Category: 301 injection moulding machines / Injection molding machines
Latest update: 05.12.2023 add to watchlist
item-No.: 148863303
New in: 2001

used

Seller: Corado Kopania Krzysztof
Location: Land-pl
Price: 17.000 € add to watchlist

Manufacture Krauss Maffei Type KM 350-1900C2 Year prod../ no. manufacture 2001/354332 Diameter of screw mm 60 Shot volume g 700 Presure bar 2420 Clamping force kN 3500 Mould fixing platen size mm 1060 x 1095 Distance between tie bars mm 710 x 710 Mould height - max. mm 380 Opening stroke mm 920 Max odległość pomiędzy płytami mm 1600 Control MC 4 Weight kg 16.000 Additional Hydraulics cores - 4 pcs. // Bottle with ntrogen

Category: 301 injection moulding machines
Latest update: 10.06.2022 add to watchlist
approved
dealer
item-No.: 151720310
New in: 2010

used

check Seller: Vanto Machines
Location: Barcelona Land-es

add to watchlist

Cycle Times: ? 28 gm (48 cavity) : 24~25sec ? 56 gm (48 cavity) : 25~26sec Including - Mold, 48 Cavities, 27g, for 250ml and 300ml. (Milk Bottle), Mold is not used a lot. - YUDO Side Entry robot included. - Screw diameter: 105 mm - Shot weight max: 3.950 g - Injection pressure: 1.280 bar - Clamping force: 4.500 kN - Mould opening stroke max: 820 mm - Distance between tie-bars h: 850 mm - Distance between tie-bars v: 740 mm - Power: installed max: 390 kW

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 30.11.2023 add to watchlist
approved
dealer
item-No.: 153706098
New in: 2003

used

check Seller: Maschinenhandel Borowski GmbH
Location: Land-de

add to watchlist

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 27.09.2023 add to watchlist
approved
dealer
item-No.: 153801271
New in: 2003

used

check Seller: PaGaPlast
Location: Land-pl
Price: 11.000 € add to watchlist

Key data: 110 , 198 , 40

Manufacturer: Krauss Maffei Type: KM 110 - 520 C2 Year of construction: 2003 Control: MC 4 Closing force: 1100 kN Closing type: Hydraulish Tie bar spacing: 470 mm x 470 mm Plate size: 745 mm x 770 mm Tool height: min 300 mm Opening distance: 600 mm Plate spacing max.: 900 mm Screw: 40 mm Lifting volume: 217 ccm Injection weight PS: 198 gram HP Injection pressure: 2377 bar general Engine: 18.5 kW Heating: 13 kW Dimensions: 4.5 m x 1.5 m x 2.2 m Weight: 6000 kg Screen text: German / English Additional equipment Robot interface Core train: x1 Accu

Category: 301 injection moulding machines / Injection molding machines
Latest update: 16.10.2023 add to watchlist
approved
dealer
item-No.: 157582497
New in: 2017

used

check Seller: SHANGHAI HELM IMP.& EXP. LTD
Location: Land-cn

add to watchlist

We can offer a Krauss Maffei injection moulding machine, manufactured in 2017, short time working, like new one, serious buyer cintact us.

Category: 301 injection moulding machines
Latest update: 10.06.2022 add to watchlist
approved
dealer
item-No.: 159022398
New in: 2004

used

check Seller: Vanto Machines
Location: Barcelona Land-es

add to watchlist

Used machine in good condition. Available for immediate delivery.

Category: 301 injection moulding machines
Latest update: 10.06.2022 add to watchlist
approved
dealer
item-No.: 159022399
New in: 2008

used

check Seller: Vanto Machines
Location: Barcelona Land-es

add to watchlist

Used machine in good condition. Available for immediate delivery.

Category: 301 injection moulding machines
Latest update: 10.06.2022 add to watchlist
approved
dealer
item-No.: 159145639
New in: 1998

used

check Seller: Vanto Machines
Location: Barcelona Land-es
Price: 14.000 € add to watchlist

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 77 g - Injection pressure: 2.500 bar - Injection volume: 85 cm? - Ejector stroke / force max.: 22 / 10 mm / kN - Daylight between platens max: 550 mm - Heating zones: 3.200 x 1.310 x 1.800 - Platen size (h x v): 540 x 540 mm - Distance between tie-bars (h x v): 321 x 321 mm - Mold opening force: 40 kN - Control: MC4 - Oil tank capacity: 170 l - Power: installed max: 15 kW - Operating hours: 55.000 - Weight: 2.300 kg

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
KRAUSS MAFFEI 3rd category level
 
RESALE used machinery 25 years online