used KOIKE Plasma Cutting Machines

X - axis: 3000 mm Y - axis: 1500 mm CNC Brand: _Unknown / Other CNC Model: KAR CNC Make  Koike Aronson Type MONOGRAPH - Millenium Year 2010 KAR - CNC X = 3.000 Y = 1.500 Hypertherm 100 AMP POWERMAX* Dust collector * DXF conversion * Cutting up to 16 mm  

CNC Gantry Plasma Cutting Machine Manufacturer: Koike Type: Deltatec 3000 Year of construction: 2019 CNC Control: Katana 1 plasma torch with power source Kjellberg HiFocus 161i neo with automatic gas console 1 oxy-fuel torch Extraction table: size 2x6 m Track length: 9 m Laser Pointer for Plate Layer Detection Filtration system Cutting software SigmNest

Equipped with Kioke type Hybrid 200 control, Hypertherm type HT2000 refrigeration unit, Hypertherm torch height controller and guide beams L approximately 9mtr. Suitable for 6mtr plate. Required installation space lxw approximately 925x500cm. Please note! The buyer is responsible for loading.

CNC Plasma Auto Bevel machine KOIKE VERSAGRPH-6000 3DP (2014) Width 4500 mm x 43 M, thickness 6-40 mm; "Plasma""I""cutting: 6 to 40mm; ""V""cutting: 9to 30mm; Power supply 3-phase 440V; Fluid oxygen 7~9.9 kg/cm; Fuel gas 1~1.5kg/cm (LPG); Air 7~9.9 kg/cm"; Cutting speed: 0~6,000mm/min; Marking Soeed max. 18,000 mm/min; Rapid speed:24,000mm/min (2014) Cutting bed dim: 30M x 4.6M Rail Length: 30M; Span: 6M With Chiller, Power Supply, Panel box, Cable rail, compressed air dryer, dust collector and Transformer Rails and cutting bed Attached to rails and cutting bed of Lot 313 Make KOIKE Serial VG-A-0218 Model VG-6000DXI Year 2014

Amperage range maximum: 0 A Amperage range minimum: 0 A Table Length:        1.220mm Table Width:         1.220mm Table load on 50 mm: 5.000Kg Table load on 200 mm:4.545Kg Table load on 400 mm:3.500Kg Table load on 600 mm:2.900Kg Table load on 1000 mm:1.850Kg Rotation table:      360000° Length:              2.000 mm  Width:               1.600 mm  Height:              1.800 mm  Weight:              2.000 kg 

For CNC plasma and cutting cutting systems 1 stueck Sideros suction system type ECO 4 HC, max. 5000m3/h for plasma and firing cutting systems for suction firing table from 1.5 m width (at 500 mm module width) APPLICATION dust and smoke extraction systems on plasma and firing cutting systems ( plasma up to 130 amps). Cutting of steel and stainless steel sheets. suction and filter system with integrated fan, automatic, dust-duty -cleaner filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,000 m3/h and a maximum of 2,500 Pa. filter class M at a separation degree of > 99.9% (BIA use category U,S,G,C). dimensions: Height: 2,100 mm depth: 1,413 mm Width: 1,413 mm Weight: 620 kg Air entry: NW 200 - 250 mm Price 6,990.00 EUR (price + VAT ex works, excluding pipelines, installation and commissioning);  ...

Water-cooled plasma cutting system make MESSER GRIESHEIM type HA 95Machine -No: 4030234Technical specifications:Cutting current at 60% duty cycle: 95 AOperating Voltage: 110VOpen Circuit Voltage:260VPower consumption max.:23 kVAMains connection voltage: 220/380/415/500 VDimensions approx.: 70 x 770 x 850 mmApprox. weight: 160 kgwith- Plasma hand cutting torch PHC 95 with hose pack- without rolesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pipe Cutting Machine Fabr. HEINRICHSGLÜCK Type RBSM 1Komm.-Nr. 4026, machine no. 207086, year of construction 1994CUTTING MACHINE:Workpiece diameter: 100 - 600 mmThree-jaw chuck outer / inner clamping: 193 - 321 mmExternal voltage: 8 - 136 mmInternal tension: 74-201 / 188-315 mmBurning amplitude: 0 - 276 mmBurning diameter: 0 - 390 mmRotary drive motor power: 0.21 kWSpeed: 5.7 rpmCutting speed: 50 - 1800 mm / minWorking height: 1140 mmTotal height: 1620 mmWidth (foot): 700 mmControl: SPS S5-9Lifting table:Load capacity: 800 kgTable height: 350 - 840 mmCentering grooves Drm.:200 - 900 mm (every 100 mm)Table size: 860 x 860 mmSwinging cycle (manual): 90 °Lifting motor: 1.1 kWLifting time approx. 47 sec.End limitation: 2 limit switchesDrive: manualWheel diameter: 80 mmGauge: 580 mmRated voltage: 380VRated operating current: 2 ACONSTRUCTION:2 roller blocks, Rollendrm.:130 mmDistance betwee ...

CNC flame cutting machine make ESAB type Numorex NXB 6500Machine -No: 89022, built in 1989Track width: 6500 mmTrack length: 12000 mmCutting table height: 700 mmNumber of burners: 6 oxy-fuelType of control: CNC 510With- Extraction systemused, from large company, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Plasma cutting machine make L-TEC type Plasmacut 30Fabr. -No: 174895Welding current: 30 AWelding voltage:: 100 VOpen circuit voltage:: 350 VSupply voltage: 380 VWith- hose package- Ground cable- mobileused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Photo-optical flame cutting machine make MESSER GRIESHEIM type CORTA AR 2000/2600Machine -No: 18201089 Fabr. -No: 182010 Bj. 1989Track width: 2600 mmWorking width = boom width: 2000 mmRail length: 9 mNumber of burners: 6Cutting speed: 50 - 3000 mm / minMax. Workpiece thickness: 3-200 mmPower consumption: 1.5 kVAWith- Photoelectric control type KS 20/07xa0xa0xa0 Property -No: 72277211 Series -No: 1451003used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cooling Unit - Water Recooler Fabr DELTATHERM type RKV 2Sfrom a flame cutting machineFabr. -No: 3/3089, year of construction 1990Tank capacity approx: 120 lVoltage: 380 voltsElectricity: 7.5 ampsPower: 2.0 KWRefrigerant: R 22Weight approx. 165 kgOutside dimensions: 860 x 950 x 1820 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Plasma cutting machine make THERMAL-ARC type PAK 5 XRFabr. -No: 183247 / EO2016APower: 26/18 ARated power: 55A at 100VWith- Burner- hose packageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Plasma cutting system make SPIROYear of manufacture 2002Technical specifications:Plasma extraction table: 6000 x 1500 mmPlasma source: Hypertherm 1000Feeding and straightening machine: 1500 mmMotorized decoiling system for: 3 coilsCoil weight: 1.25 twith- Hypertherm 63 series- Control Burny 2.8 plus CMW- IOWA precision PCF6016- Spare parts packageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile small flame cutting machine make MESSER-GRIESHEIM type Quicky-electronicMachine -No: 23296, built in 1965Technical specifications:Cutting range: 3 - 100 mmstepless travel speed: 100 - 1000 mm / min.Drive power: 40 WPower connection: 220 V / 50 HzExternal dimensions: 450 x 250 x 250 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

; ready to use

Produced: 2004 Parameters: Table: 2x3m Max head count: 4 Gauge: 2500 mm Cutting width *-1 burner: 2100 mm Cutting width *-2 burners: 1970 mm Cutting width *-3 burners: 1840 mm Cutting width *-4 burners: 1710 mm min. Parallel cut: 90 mm Cutting speed: 50-6000 mm/min. Cuttous (standard): do 200 mm Machine width: 3150 mm Machine length: 1320 mm Machine height: 1700 mm Cutting table height: 600 mm Connection voltage: 230V/50Hz

Plasma cutting machine used, little used, in very good condition. Ideal for the production of angular or round air ducts. Max sheet size: 3000x1500mm Facilities: â?¢ Sectional suction â?¢ Autom. Label â?¢ Production program "ViaDuct" (air duct production) on a separate PC â?¢ Network connection â?¢ Power source:ThermalDynamicsCutmaster A40 Suction filter available in separate display.

OERLIKON / ALPHATOME II T30 HP300 PPM 400 OERLIKON - Typ: ALPHATOME II T30 HP300 PPM 400 - Baujahr: à 2013. Special features of the ALPHATOME II series / EQUIPMENT: * Camera system: Moving camera on the cross-drive carriage for easy positioning and cutting monitoring by the operator from the control panel. The graphic is done by a permanently visible button on the touch screen interface. * Protective devices: 7 Facilities for the protection of operating personnel. Photocells in the front and back of the bridge. Emergency stop button on all corners, as well as on the external control panel. * Anti-glare-/splash protection: The anti-glare panel of the bridge is raised or lowered automatically or by pressing a button. On the sides, the panel can be opened manually for the burner and wear parts. Furthermore, the noise development is significantly reduced and resulting smoke is  ...

Plasma-gas cutting machine ECKERT JANTAR 2 was produced in 2007. Technical parameters: – CNC control: ECS 859 – table: 9 sections, 1.62 m long each – table width: 3.2 m – table length: 14.58 m – number of slides: 3 – possibility of communication with a computer – possibility of plasma and gas cutting – 2 Harris gas burners – plasma cutting thickness: 8-10 mm – gas cutting thickness: up to 90 mm – power supply: 230 V – rated current: 12 A – plasma aggregate: PA-S45W

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

The IQM MICROSTEP SPLR 6001.25 Pr BEM 12 CNC plasma cutter was manufactured in 2008 by the Slovak company IQM s.r.o. Thanks to the rotary head tilted by ± 50 degrees, it is possible to cut sheets of various thicknesses - 25 mm with a burner tilt of 50 degrees, 35 mm with a burner inclination up to 25 degrees and 50 mm with a zero burner inclination. The working table has a bridge structure with pneumatically opened sections, and its dimensions are (L x W) 6000 mm x 2500 mm. The burner is equipped with, among others in: MSNC 500 CNC control, AsperWin software with AsperBevel module or Hypertherm HPR 130 plasma unit. The total weight of the R-SPLR 6001.25 PrBEM12I (G) plasma cutter is 5000 kg. Technical data of the IQM MICROSTEP R-SPLR 6001.25 PrBEM12I (G) CNC plasma cutter - dimensions of the working table (length x width): 6000 x 2500 mm - type of working table: bridge with pneum ...

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

X - axis: 0 mm Y - axis: 0 mm Plasma Tube Cutting Machine is highly accurate and versatile. It can cut multiple profiles: pipe, flat bar and box section. The Multiple Profile Cutting Machine combines the cutting capability of three machines into one machine.   Length:14.000 mm  Width:3.500 mm  Height:2.300 mm  Minimum Tube diameter 60 mm Maximum tube diameter 1016 mm Maximum Workpiece weight 6 Ton Number controlled axis 6 Plasma cutting with power supply Max. wall thickness ca 60 mm