We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Manufacturer: Pankoke und Kochsiek, Type: BFA-03, Control: hand, Program-controlled: no, Min.-max. workpiece length in mm: 22,5, Min.-max. workpiece height in mm: 0,75, Program: 40, Drilling beam swivel-mounted: no, Lochraster: yes, Drilling engine kW: yes, Working range max mm: yes, Drilling support horizontal: 2, Dovel insertion: inkl. Magazinaufstapel Magazin und Hauptsäge und Nutsäge,
used
Manufacturer: Koch , Type: BLG, Year: 1992, Control: hand, Program-controlled: yes, Software: 300, Work piece width min-max mm: 200-2500, Min.-max. workpiece length in mm: 10-60, Program: yes, Lochraster: alle 2, Drilling engine kW: 60/80, Working range max mm: 2 von hinten, Drilling supprt from bottom: 2, Drill supports from behind: 7, Work piece refeeding: yes, Taktleitung min: 1, Dovel insertion: yes, Overhauled on: alle Bohrgetriebe drehbar 360 Grad, Year :1992
used
Manufacturer: Koch , Type: Sigma, Year: 1985, Min.-max. workpiece length in mm: 1800, Drilling support horizontal: 1, Bohrgetriebe horizontal Stk.: 1, Drilling supprt from bottom: 1, Bohrgetriebe von unten Stk.: 2, Working range max mm: 60, Raster mm: 32, Number of drill spindles: Horizontal 21<CRLF>Vertikal 2 x 9, Working range max mm: 60, Manufacturer: Koch , Year :1985
used
Manufacturer: Koch, Type: BD 60, Year: 1985, Control: hand, Work piece width min-max mm: 30-600, Min.-max. workpiece length in mm: 250-2500, Min.-max. workpiece height in mm: 10-45, Drilling support horizontal: 2, Bohrgetriebe horizontal Stk.: 4, Drill support from top: 2, Bohrgetriebe von oben Stk.: 4, Bohrsupporte von hinten: keine, Working range max mm: 60, Bohrgetriebe gesamt Stk: 8, Raster mm: 32/64, Drilling engine kW: 1,2, Working range max mm: 60, Dovel units: 6, Dovel insertion: yes, Dovel diameter mm: 6 X30, Pneumatic clamping: yes, Work stations: 2, Manufacturer: Koch, Year :1985
used
Manufacturer: Pankoke und Kochsiek, Type: BFA 03, Year: 1988, Drilling supprt from bottom: 3, Groove saw: 1x Horizontal<CRLF>1x Vertikal, Year :1988
used
Description: Min. panel length 110 mm Max. panel length 800 mm Max. panel width 1250 mm No. Top clamps 6 no. bottom vertical units 1 with positioning by NC spindles for vertical boring 1 No. injectors 2 No. storage tank 1 Item inserted wooden dowels Control system KOCH NUMERIC Safety standard CE mark Safety photocells Approx. Onsite Dimension. (l x w x h): 3,000 x 1,750 x 2,200 mm, weight approx.: 3,000 kg
6-colour format: 720 mm<br>TYP: 500, 6 INTAGLIO + 1 FLEXO, PAPIER & FOLIEN 50-150 GSM, ROLLS of 800 MM WIDTH: 750 MM;<br><br>Still in operation: Yes<br>Verf Gbar: immediately
used
Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!
6-color size 720 mm TYPE: 500, 6 INTAGLIO + 1 FLEXO, PAPER & FOILS 50 - 150 GSM, ROLL DIA. 800 MM WIDTH: 750 MM; Still in operation: Yes Available: IMMEDIATLY
used
This machine was specially to the grooves and separation of Built in the front of the drawer. On these machines panels can generally be tongued and divided.
used
Various new parts ( warehousing ) for BA 25 Y- Axis Ball-circuit threaded spindle with nut 40x10 mmx 761x939 with nut piece as good as new (packaged) Linea guides X-axis : New as good as new (stock) 2 pcs. linear guide provil rails THK approx. 2500 mm lg size 45 x38 4 pcs. linar guide slide THK HSR 45 Lg: 120 mm - Steel body whole,tlg approx. 168 mm 2 pcs. linar guide slide THK HSR 45 Lg: 98 mm - Steel body total,tlg approx. 136 mm 6 St. OTT Rotary Feedthroughs Type: 2K Rotary feedthroughs -KE M 42 x1.5 as good as new (or partially overhauled General -used) Ware Order No. 95.101.066.2.2 Fabr: Fabr. OTT- Jakob GmbH &Co. Spanntechnik KG 1 St. 1 St. Guide Box org. KOSTYRKA as good as good stock -pk-5350.1196.00370617/11 Sale individually or in whole pack set
used
CKT 500 52 kW heating to dry cooking dryer is sold by granulate or regrind. Container for approx. 800 kg bulk.
used
According to the description below
used
Koch Pumpentechnik (Porta Westphalica) Built: 2007 Type: FP2/40-125/302 Power: 20 m3/h at 18 m height (water) very good condition Engine power: 3 kW/3.45 kW Weight: 70 kg Diameter inlet: 65 mm Diameter outlet: 50 mm Milk pipe LWH: 500 x 230 x 360 mm
used
wire dia.: 5 - 17 mm wire length: max. 5.000 mm straightening feed: stufenlos bis ca. 60 m/min : 11 kW, 380 V, 50 Hz : 45 kW, 1480 U/min, 380 V, 50 Hz total wight: ca. 15 t : Typ DZA/20 f. 1000kg Coil The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Number of filling stations: 10, with hoses.
used
voltage:400 V The glass module with a diameter of 300 x 200mm has been broken and repaired (see picture). A new part can be installed on request (EURO 370, -). Payment: 100% prior to delivery
used
Dosing unit - Koch Year of construction:* Drum dosing unit with mixer, manually controlled by time and number of rotations Price: On request
used
Loader - Koch Year of construction: 2017 The loader with container Price: On request
used
Magnetic drilling machine, magnetic drilling machine Core hole drilling machine, Metal core hole drilling machine DR. BENDER Type EK 323 Masch No. 180543 Year of construction approx. 1988 Drilling capacity 23 mm Spindle holder MK 2 Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mm Drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear stages - Left and clockwise rotation - E-magnet KOCH, type KL32/6 - Drill head height adjustment guided in a linear guide - manual expulsor - Drill stand rotatable on magnetic base, clamping via toggle screw Dimensions L x W x H 680 x 380 x 630 mm Weight 35 kg good condition; used
used
approx. 1.200 pieces Corletten, 1,30m, cook - used - : Prices per piece ex location (net): Price scale: up to 19 pieces: 99.-€ (net) From 20 pieces: 89.-€ From truck acceptance (approx. 70 pieces): 85.-€ Priority acceptance: complete trucks! Manufacturer: Koch Type: Muti – Box 130 Payload: 800kg Dimensions: 1.300mm x 1.150mm x 1.900mm Non-stackable, foldable with runners! Condition: good Available: as of now Location: 99189 Elxleben / Erfurt
used
AUTOMATION FOR THE PLASTIC BUCKET INDUSTRY Year of manufacture 2016 Up to 1800 buckets per hour Performance data Shapes: round, oval, square Stacking height: 1200 mm Article sizes: 1 l - 12 l or 10 l - 30 l Quick-change device Servo control with 4 axes SPS with recipe management Optical registering conveyor belt
used
Manufacturer: Koch Windoor, Type: BL-51-NC, Year: 1998, Control: Beckhoff, Work piece width min-max mm: 30-200, Milling spindles horizontal: 2, Feeding speed max m/min: ca.80, Drill vertical Y: 5, Horizontal drills-X: 9, Number of milling spindles: 4, FREE TEXT: Dübelwerkzeuge 3, Year :1998
used
Manufacturer: Koch , Type: SBD-B, Control: Siemens, Min.-max. working length in mm: 250-2500, Working width min-max mm: 10-150, Min.-max. workpiece thickness in mm: 10-60, Drilling support horizontal: 2, Drill gearings: 6, Drill gearings: 6, Drill support from top: 4, Drill gearings: 6, Drilling engine kW: ca.1,5, Working range max mm: 60, Dovel lenght mm: 10 X 30, Number of doveling tools: 4, Glue high-pressure pump: yes, Glue quantity setting: yes, Dowels horizontal: yes, FREE TEXT: mitMagazin und Rückführung der Werkstücke,