used KNUTH Engine Lathes Sliding Surfacing And Screw Cutting Lathes

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

Center height: 500 mm Center distance: 1500 mm Spindle bore: 105 mm MACH-id   3541 MERK  KNUTH Germany TYPE  DL 550 / 1500 B YEAR  2008 SPECIFICATIES Draai Ø diameter over bed   1100 mm Draaidiameter over support  790 mm Draai Ø diameter in de zak   1270 mm Draai lengte  1500 mm Doorlaat - spindel boring  105 mm Toeren - Snelheden - Stappen  6 - 800 Rpm Bed Breedte   550 mm Vermogen Kw  11 Kw AFMETINGEN Lengte   3510 mm Breedte  1590 mm Hoogte   1760 mm

Key data: 580 mm, 1000 mm, 400 mm

L + Z Lathe KNUTH 1000 A L + Z Lathe KNUTH Type 1000 A Masch. No. 118 255 Year of construction 1999 Center width 1000 mm max turning diameter over bed 400 mm Tip height above bed 200 mm max turning diameter over support 240 mm Turning diameter without bridge 580 mm Length of bridge: 52 mm Spindle bore 52 mm spindle cone: MK 6 Quill cone: MK 4 Spindle speed 30-1600 rpm. 12 steps Longitudinal feeds 0.04 – 1.06 mm Transverse feed 0.02 – 0.53 mm Tapping (30) 0.45 - 20 mm Tailstock quill 130 mm Power supply 400 volts, 50 Hz, 6.6 kW - 3-axis digital display position indicator - KNUTH, - Spindle speed over 15 gear stages - 3-jaw lathe chuck Ø 250 mm -4 Jaw chuck never used. new - Quick-change steel bracket Multifix size B with 3 inserts - Coolant tank with pump in the machine base - Spindle brake with foot pedal - Foldable chuck protection - Splash guard - Eme ...

Key data: 356 mm, 178 mm

technically tested and maintained, with signs of use

Key data: 356 mm

Basic 180 V is one of the heaviest machines in this popular market segment. With a bed width of 206 mm and a 30 percent higher total weight, their solid construction has a positive effect on the machining quality. - Bed made of cast iron, heavily ribbed - All guides inductively hardened and precision-ground - Main spindle with D1-4" holder, bore Ø 38 mm, guided in 2 adjustable precision tapered roller bearings - All gears made of Cr-Ni steel, hardened, precision ground, running in oil bath - Tailstock can be moved ± 10 mm for taper turning - Guides can be adjusted via wedge strips - With 3-axis position indicator, mounted - Used tracks, technically checked and without defects

DEMONSTRATION MACHINE with slight signs of wear and minor paint marks, technically tested and maintained, full warranty Their robust design, powerful motor and versatility are the hallmarks of the Turnado series lathes. For more than 20 years, they have been among the proven bestsellers of our conventional lathes. The V models are also equipped with an extended, infinitely variable speed range. In combination with the position indicator and the integrated constant cutting speed function, they achieve superior surface quality during face turning. - Center height 280 mm - Workpiece length 1428 mm - Circumferential Ø above bed 560 mm - Infinitely variable speed range - Classic design in stable construction = durable - One-piece, heavy-duty cast iron bed for more stability - 3-axis position indicator with various rotation functions - Adjustable longitudinal stops for autom. S ...

Servo-conventional lathe The Servoturn series of universal lathes combines state-of-the-art feed technology with classic mechanical engineering. In contrast to conventional lathes, this series has ball screws and electronic handwheels in all axes. High-torque servo motors implement every feed movement with the dynamics of modern CNC machines. Without interchangeable wheels and gears, feed and thread pitches can be selected electronically. Rapid traverses in all axes reduce non-productive times and electronic stops offer high repeatability. - Center width 1950 mm - Turning diameter over bed 500 mm - Circulating Ø over support 300 mm - Servo feed system - Ball screws in all axes - Electronic handwheels - Position display with V-constant function - Quick-change steel bracket If you are interested, we will be happy to send you our complete data sheet.

Servo-conventional lathe The Servoturn series of universal lathes combines state-of-the-art feed technology with classic mechanical engineering. In contrast to conventional lathes, this series has ball screws and electronic handwheels in all axes. High-torque servo motors implement every feed movement with the dynamics of modern CNC machines. Without interchangeable wheels and gears, feed and thread pitches can be selected electronically. Rapid traverses in all axes reduce non-productive times and electronic stops offer high repeatability. - Center width 950 mm - Turning diameter over bed 500 mm - Circulating Ø over support 300 mm - Servo feed system - Ball screws in all axes - Electronic handwheels - Position display with V-constant function - Quick-change steel bracket If you are interested, we will be happy to send you our complete data sheet.

Servo-conventional lathe The Servoturn series of universal lathes combines state-of-the-art feed technology with classic mechanical engineering. In contrast to conventional lathes, this series has ball screws and electronic handwheels in all axes. High-torque servo motors implement every feed movement with the dynamics of modern CNC machines. Without interchangeable wheels and gears, feed and thread pitches can be selected electronically. Rapid traverses in all axes reduce non-productive times and electronic stops offer high repeatability. - Center width 1450 mm - Turning diameter over bed 500 mm - Circulating Ø over support 300 mm - Servo feed system - Ball screws in all axes - Electronic handwheels - Position display with V-constant function - Quick-change steel bracket If you are interested, we will be happy to send you our complete data sheet.

This 2-Axis lathe was manufactured in 2015. Featuring a Fanuc 0i-Mate TD control, it offers a speed range of 50-6000 min-1 and rapid traverse speeds up to 30000 mm/min. Equipped with a hydraulic 3-B chuck and hydraulic tailstock MK5, it ensures efficient operations. Weighing 5000 kg and with dimensions of 3300 x 1700 x 1700 mm, it’s robust yet space-efficient. Consider the Knuth Starship 400 for precise turning operations. Contact us for further information.

- Cutting angle adjustment 0° - 45° - Robust touchscreen control panel - Automatic workpiece feed - Torsion-resistant double column construction - Hydraulic infeed of the saw bar via chrome-plated column guide - Slightly inclined saw handle for improved cutting performance and increased saw blade life - Double, hydraulic workpiece clamping - Infinitely variable adjustment of the cutting speed - Programmable, automatic angle positioning in 1° steps from 0° to 45° - High angular accuracy due to precise and stable saw blade guides - Automatic belt breakage control - Belt speed is infinitely variable and is shown on the display - Machine with signs of wear and damage to the paintwork - no functional impairment

tool adaptor: SK 40 weight of the machine ca.: 2,3 t x-travel: 800 mm digital: quill stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-way row drilling machine make KNUTH type KGB 25Year of construction 1996Technical specifications:max.drilling capacity in steel: 25 mmTapping capacity: M 16Spindle mount: MK 3Quill stroke: 150 mm3 spindle speeds: 100 - 2900 rpm.Projection: 225 mmDistance spindle - table: 15 - 470 mmTable L x W: 1300 x 295 mmDrive power: 0.75 kW / 380 VDimensions approx .: 1600 x 800 x 1900 mmWeight approx: 750 kgwith- 3 drill headsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

Hydraulic fixed angle notching machine make KNUTH type KKM 250.6Machine -No: 124780 built in 2002Technical specifications:max.sheet thickness at 45 kg: 6.0 mmCutting length: 250 mmCutting angle: 90 degreesStrokes per minute: 50Table size: 810 x 750 mmHydraulic oil tank: 40 lDrive power: 4.0 kWExternal dimensions approx .: 900 x 900 x 1150 mmWeight approx: 856 kgWith- foot switch- 2 adjustable angle lengthsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Milling Machine Fabr. KNUTH Type WF 1 CNCYear 1995Table mounting surface: 270 x 700 mmTable movement along X: 300 mmTable movement vertical Y: 200 mmTable movement across Z: 350 mmSpindle mount horizontal and vertical: ISO 408 spindle speeds horizontally: 110 - 1230 rpm.8 spindle speeds vertical: 150 - 1660 rpm.8 feeds: 26 - 290 mm / minRapid traverse: 1100 mm / minPinole way: 60 mmDrive power: 3.7 kWDimensions approx: 1310 x 1380 x 1650 mmWeight approx: 1000 kgWith- CNC track control type Commander- rigid angle table- Vice- Various tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Combined drilling and milling machine make KNUTH type VBF 40Machine -No: 604046Technical specifications:Drilling capacity in steel: 38 mmTapping: 25 mmEnd milling up to: 25 mmCutter heads up to: 75 mmSpindle mount: MK 4Throat: 300 mm16 spindle speeds: 120 - 1600 rpm.Quill stroke: 120 mm3 automatic feeds: 0.15 / 0.23 / 0.3 mm / revTable size: 850 x 250 mmmax.distance spindle / table: 450 mmX x Y x Z: 470 x 270 x 460 mmDrive power: 2.2 kWWeight approx: 750 kgExternal dimensions: 1150 x 1070 x 2000 mmWith- Work table with attached air table 1200 x 1200 mm- stepless speedsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal tool milling machine make KNUTH type WF 5Machine -No: 108788 Year 1996Travel X: 400 mmTravel Y: 320 mmTravel distance Z: 440 mm18 spindle speeds: 63 - 3150 rpm.Spindle mount: ISA 40Projection: 165 - 485 mmTable size: 800 x 320 mmFeeds stepless: 10 - 1000 mm / min.Rapid traverse: 2000 mm / minDrive power: 3.0 kWDimensions approx: 1700 x 1660 x 1890 mmWith- 3-axis digital display- rigid angle table- Vice- many tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic CNC swing cut guillotine shears make KNUTH type KHT D 3006Year of construction 2018Technical specifications:Max. cutting length: 3100 mmMax. sheet thickness: 0.5 - 6.0 mmCutting angle: 1.3°Number of hold-down devices:16Stroke :105mmNumber of strokes per minute:15Working table height: 865 mmNumber of support arms:3Oil tank: 200LMotor power: 15 kWDimensions approx.: 4110 x 2200 x 2100 mmWeight approx.: 7300 kgwith- Sheet metal holding device- D-Touch 7 control with touch screen for motorized backgauge 1000 mm and intersection- foot switchlittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mot. - Ring - Bow - Bending machine Offer number: 15252 Make: KNUTH Type: MSB 30 Machine No: 121217 Built: 2000 Technical data: - horizontal working position - 2 mot. driven rollers - manual vertical delivery of the upper roller - Lifting top roller up to 30 mm - Shaft diameter 40 mm - Wave length 35 mm - Wave rotation 12 rpm - Roll diameter 76 - 88 mm - Drive 400 V 1.1 kW - Bending power approx. - Round tube 30 x 1.5 mm - Flat steel 30 x 10 mm - E - foot button for right / left - run - Round tube roller set approx. 23 mm - Weight approx. 150 kg - Space requirement approx. W 700 x H 1150 x D 650 mm

Control Siemens 828 D Travel X/Y/Z 850/550/550 mm Speed 8000 rpm Tool magazine for 24 tools BT40 Table size 950x550 mm

saw blade diameter: 350 mm cutting diameter: 120 mm capacity 45 degrees: flat: 180 x 50 mm capacity 45 degrees: round: 116 mm capacity 90 degrees: flat: 200 x 80 mm capacity 45 degrees: square: 100 x 100 mm capacity 90 degrees: square: 105 x 105 mm capacity 90 degrees: round: 120 mm weight of the machine ca.: 266 kg Furnishing: - Aluminum circular saw with manual clamping device - machine base - without saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KNUTH MF5V Universal Milling Machine YOM 2005 Germany X-travel 800 mm Y-travel 390 mm Z-travel 380 mm Spindle taper ISO SK 40 Speed 70 - 3600 rpm Quill feed 3 steps- 0,04/ 0,08/ 0,15 mm/r Quill travel 127 mm Distance spindle nose- table min./max. 50 / 456 mm Distance spindle center to column min./max. 57 / 603 mm Table dimensions 1370 x 250 mm Table load 350 kg Total power requirement 3,75 kW Machine weight approx. 1590 kg dimension machine approx.LxWxH 2,1 x 3,1 x 2,3 m Accessories: Vices, 3 tool holders

Capacity round maximum diameter: 810 mm Angle degrees maximum: 480 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id   3542 MERK  Knuth Germany TYPE  HB 810 L YEAR   2008 SPECIFICATIES  Circel / Band zaagVol / Half automaat  Bandsaw Verstek zagen links en rechts ˚Graden  ANgle cutting 45 Gr .Capaciteit bij 90 ˚ Graden rond Ø  810 mm Capaciteit bij 90 ˚ Graden plat  810 x 850 mm Capaciteit bij 45 ˚ Graden rond Ø  810 mm Capaciteit bij 45 ˚ Graden plat  480 x 850 mm Zaag blad / band afmeting  8200 x 41 x 1,3 mm Zaag snelheid M/Min. 20 - 100 M/min AFMETINGEN Lengte  3900 mm Breedte  1200 mm Hoogte 3350 mm  

Specifications: - 2 mot. driven rollers - manual. Delivery of the top roller - Shaft diameter 30 mm - Shaft rotation 6 rpm - Roller diameter 132 mm - Bending performance - Flat steel upright 50 x 10 mm - flat 80 x 15 mm - Square 30 mm - Square tube 50 x 50 mm - Round tube 60 x 1.5 mm - Drive 400 V / 0.6 / 0.8 kW - with: - right / left - run - Standard bending set for flat and angle material - separate control panel - Weight approx. 200 kg - Space requirement approx. W 650 x H 1300 x D 950 mm