used KLOPFER Three Jaw Chucks

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg

Collet holder, tool holder, tool holder, milling holder, milling tool, mandrel, collet mandrel, collet -Manufacturer: Thumper, collet mandrel with collet -Type: SP 9 -Clamping range: 55 - 70 mm -Collet sleeve: Ø 54 mm -Total dimensions: Ø 80 x 330 mm -Weight: 6.0 kg

Collet holder, tool holder, tool holder, milling holder, milling tool, mandrel, collet mandrel, collet -Manufacturer: Thumper, collet mandrel with collet -Type: SP-TR-9 -Clamping range: 55 - 70 mm -Collet sleeve: Ø 54 mm -Total dimensions: Ø 78 x 330 mm -Weight: 6.0 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 165 mm -Passage: Ø 47 mm -Weight: 7 kg

Rotary table with 3-jaw chuck PAGUS Ø 250 mm Table height: 170 mm groove width 12 mm used, tested ! Dimensions: 350 x 300 x 170 mm

Fmax 6000 daN, nmax 4000 min-¹ External 250 mm, Centering 220 mm, DIN 6353 Size 8, Thread M30 Guide pin 100

Description: Consisting of 5 pieces Diameter: 250 mm, 240 mm, 160 mm, 160 mm and 200 mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm, weight approx.: 100 kg

Description: Consisting of 3 pieces Diameter: 200 mm, 250 mm and 250 mm Also various clamping jaws Approx. Onsite Dimension. (l x w x h): 800 x 600 x 150 mm, weight approx.: 90 kg

Description: A total of 3 jaw chucks including clamping jaws, different diameters , weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 600 x 400 x 300 mm

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 34 mm -Dimensions: see photo techn. drawing -Total dimensions: 130/136/H80 mm -Total weight: 7,0 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 125/130/H70 mm -Total weight: 5.4 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H190 mm -Total weight: 14 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 120/130/H85 mm -Total weight: 6,2 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H95 mm -Total weight: 7,8 kg

Three-jaw Chuck Forkardt compensating voltage -Verschiebeweg 35 mm -Jaw stroke 2, 5 mm Radial compensation ability 0.5 mm Speed 5000 RPM Lining very good condition dating back to location resolution of a grinding machine manufacturer New price ca 25000 euro Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

CNC lathe type 10"/ 250mm Recording A2-8" with soft top jaws, tails and bolts Max speed 2800 rpm Suit thread M60 ( Interchangeable )

RÖHM KFD-1000/3 3/32 Power chuck - unused/brand new Year of construction: 2019 Power chuck RÖHM KFD-1000/3 3/32 ZA520 M30 OD KH42 BH15,2 Item No.: 84662091 Country of origin: Germany H-solid chip cylinder OVS-200 SV 4,500 RPM STROKE 50 Item No.: 84662091 EAN-No.: 4019208232577 Country of origin: Germany Stroke control KP F90 OVS-200 Item No.: 84662091 EAN-No.: 4019208235059 Country of origin: Germany All other accessories shown in the photo are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. Instruction manual – illustration, content and information without guarantee, therefore not binding – see "PDF. At that time NEW PRICE net 20.400 € SPECIAL PRICE BRAND NEW NET 14.900 € Free loading truck - FCA D-8840 ...

2 pcs. Three-jaw chuck φ 230 with inner jaws 100,- each 1 pc Three-jaw lining φ 230 with outer jaws, Emco 100,- 1 pc Three-jaw lining φ 190, inner jaws and soft jaws Recording 6 DIN 55022 100,- 1 pc Three-jaw lining φ 315, inside and outside jaws, sgt . 360,- 1 pc Three-jaw chuck, Tos, φ 100, outer jaws, 5 Din 55022, 100,- 1 pc V-bar chuck Forkardt, KL160, φ. 160, without jaw H- 75mm, Holder: 6 DIN 55022 250,- Prices: ex works !

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -DHK: 200x3 -TGL: 30-2333 -Chuck size: Ø 200 mm -Beeks: individually and completely adjustable -interchangeable jaws -Through hole: 55 mm -Rezess: Ø 160 mm -Number: 1x feed available -Price: per piece -Weight: 16 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: clamping aid -clamping plate -Chuck size: Ø 255 mm -Weight: 20 kg

Three-jaw chuck, three-jaw lathe chuck -Handover/sale: in the current condition as seen -Damage: see photos -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 190 mm -Throughput: Ø 57 mm, lining Ø 75 mm -Bolt circle: Ø 168/14 mm -Weight: 16.4 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Roto Record, three-jaw chuck recording SK50 -Chuck size: Ø 160 mm -Passage: Ø 42 mm -Weight: 12 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size diameter 195 mm -Passage: Ø 60 mm -Accessories: incl. clamping tool -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Chuck size Drm. 80mm -Passage: Ø 16 mm -Bolt circle: Ø 66 mm / M6 -Accessories: incl. 2nd set of hard jaws and clamping tool -Weight: 1.7 kg