used KLOCKNER PENTAPACK Blister packaging machines

• Blister size length 28 mm, blister width 100 mm, • Drawing depth 12 mm • Output knife 15-90 cyles/min • Sev. tool sets for blister size 28 x 100 m for capsules size 0, 1, 2 and 4, tablets and suppos (listing see photo), manual product feeding • Counter • IQ-OQ-documentation on French • Machine has no common punching tool but a lateral knife, connection 380V/50Hz This machine is offered at a special price and is sold as is - were is, without technical inspection.

– German production –DTR TECHNICAL PARAMETERS: width 400 mm height 120 mm rotor diameter 430 mm rotor length 430 mm engine power 37 kW motor power 2 x 2.2 kW number of knives 2 pieces sieve 60 x 60 mm two lower toothed shafts upper toothed shaft tray length 4900 mm wood chip chute with sieve transport dimensions (L/W/H) 850 / 245 / 220 cm weight ~ 2500 kg

Working Width: 800 mm Working Height: 300 mm Main Motor Power: 250 KW

Working Width: 900 mm WorkinG Height: 240 mm

CATALOG NO. 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - knife length 530mm - number of knives 2 pcs - sieve dimensions 55x50mm - 2 geared rollers pulling from the bottom - lower shaft motor approximately 3kW - toothed shaft pulling from above - upper shaft motor 1.5kW - length of the feed belt 4600mm - feed belt width 400mm - main engine 55kW - autoreverse - feeder dimensions length/width/height 4630x620x760mm - machine dimensions length/width/height 2510x1700x1200mm - weight approximately 3500 kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 85,900 PLN Net price: 19089 EUR depending on the price 4. ...

CATALOG NO. 7102 TECHNICAL DATA - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 18x18mm - toothed shaft pulling from the bottom - lower shaft motor 0.75kW - toothed shaft pulling from above - upper shaft motor 0.75kW - belt feeder - feed belt length 3260mm - feed belt width 400mm - main engine 38kW - autoreverse - diameter of the exhaust pipe 250mm - total dimensions length/width/height 5200x1400x1870mm, - weight 2020kg – German production – autoreverse – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 88900 PLN Net price: 19756 EUR depending on the price 4.50 EUR Net price: 233 ...

CATALOG NO. 7027 TECHNICAL DATA - inlet width 400mm - inlet height 200mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 80x80mm - toothed shaft pulling from the bottom - lower shaft motor 1.5kW - toothed shaft pulling from above - upper shaft motor 1.5kW - belt feeder - length of the feed belt 5400mm - feed belt width 400mm - main engine 30kW - autoreverse, - reverse gear - machine dimensions length/width/height 2200x1450x1150mm - feeder dimensions length/width/height 5300x550x500mm - weight 1950kg – German production, – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 78,900 PLN Net price: 17533 EUR depending on the price 4 ...

I sell the horizontal wood shredder Klöckner, Hammer System. Quärketteneinfoerderer included in price 10.0m vibration input table with magnet for metal elements. 800x400mm input in shredder Engine 160KW Capacity 30 t per hour Very good condition. Available the same. Available with the whole building.

Klockner Desma 100ton Injection Press Model: D968.100.Z0 Plate size: 400mm deep x 500mm wide Stroke volume 350cm3 Clamping force 1000kN Injection pressure 2380 bar Voltage 3x 400 50Hz Year 1998

Cartoner Manufacturer Klockner Model P120 Located in United Kingdom with Guk leaflet folder

Manual Blistering Machine TOMMY NIELSEN 501 FSX Year: 11-12-2009 CE Marked: YES Model: 501 FSX Voltage: 3x400/230V Frequency: 50 Hz kW: 3.5kW Bar: 7.0 Serial No: 20091102 Format: -11.8cm x 27.5cm -19 cm x 27.5 cm -2x (11.5cm x 12.2cm) below Price: 12500 eur (FOB)

BLISTER PACAGE FORMING MACHINE LIMPIR Machine is in perfect working condition We use machine durring production of switch production paccaging switches.

Used blister machine for PVC / alu blisters, produced by EMPAK Kraków, model: PFR-7n. New: 1994. Marking blisters with an inkjet printer.

Marchesini MB430/MA305 blister line for tablets, capsules, etc. with blister machine model MB 430 for PVC/ALU blister, capacity up to 95 cycles per minute, maximum forming depth 9.5 mm, ROBOCOMBI robotized transfer of the blisters into the infeed of a horizontal cartoner model MA 305, continuous motion, carton size range min. 25 x 15 x 65 mm (AxBxH), max. 100 x 85 x 150 mm (AxBxH), capacity up to 240 cartons per minute, GUK flat sheet leaflet folder from stack, bar code reading of carton, leaflet and presence of leaflet inside carton, flap cosing for variable data (expiry date, batch no., etc.), reverse tuck closure.

Universal Blister machine with platen sealing for pharmaceutical production incl. various format parts and LYNX-5-fill control. The machine processes ALU/PVC blisters and is suitable for tablets, dragées und capsules. The forming an packing machine operates in single stroke (ET), i.e. all stations for the main functions forming, sealing and punching operate in the same cycle, while the film runs through the machine intermittently. Output: 15-50 cycles/min. at 12 mm forming depth | 15-40 cycles/min. at 28 mm forming depth.

Complete single-lane blister machine suitable for oral solids. System incl. Aylward product feeding system, Scanware color filling control etc. Output: up to 250 blisters/min The line is in line with the cartoning machine type P3000. Complete single lane blister machine suitable for oral solids. Machine comes with Aylward product feeding system, Scanware color-will controller etc. Output: up to 250 blisters/min. The plant is in line with the cartoner type P3000.

Universal blister machine in the medium to high-speed category. Suitable for processing tablets/coated tablets in corresponding blister for Alu/PVC, or Alu/Alu foils. Machine is fitted with a Simtap-feeding system. Output: up to 600 blisters/min. The blister machine is in line with the cartoning machine, type C2205.

This Blistering machine is characterised by fast and easy size change, precise reproducibility of all parameters, production safety for product and packaging material by indirect tool temperature maintenance at forming and sealing station, functional safety by cavity centering with roller web transport. Product feed by means of linear feeder, positive blister transfer without chain transport system. Available format sizes: – 14 tablets for blister: oval tablets size 26,5 x 12 x 10 mm, blister size 142 x 63 mm; – 6 tablets for blister: round tablets size 13 x 13 x 7 mm, blister size 120 x 53 mm; – 6 tablets for blister: round tablets size 12,5 x 12,5 x 7,5 mm; blister size 120 x 63 mm; – 15 tablets for blister: oval tablets size 27 x 12 x 10,5 mm; blister size 112 x 90 mm. Installed format size: – 10 tablets for blister: round tablets size 16,5 x 16, ...

BLISTER LINE ROMACO NOACK (BLISTERING MACHINE + CARTONING MACHINE) Year of construction: 1998 Blister packing line consisting the following two machines, both electrically upgraded in 2020 with new PLC and HMI. Noack 920 blister packer: Maximum draw depth: 12 mm Maximum foil width: 160 mm Maximum capacity: 80 forming strokes per minute Blister collation system for feeding into the cartoner Automatic tablet track in-feed system Tablet feeders into brush box Suitable for packaging tablets or capsules into Alu/Alu or PVC/Alu blisters Variable speed Laetus vision system Vacuum system HAPA H-226-C printer Romaco Promatic P150 fully automatic horizontal intermittent cartoning machine: High production speed, format change without tools Carton dimensions: minimum: 20mm x 15mm x 60mm; maximum: 100mm x 85mm x 150mm Minimum carton dimensions: 20mm x 15mm x 60mm Ma ...

Blister machine Manufacturer: Uhlmann Type UPS 1070 Output 15 – 200/cycles min. Film width min. 150 mm – max. 300 mm including colour and product control, made by Scanware, type LYNX Spectra CL/HR Blister machine with side channel blower 2016 new sealing head with adjustment dome Dimensions: 8000 mm length x 1800 mm width x 1900 mm height, weight approx. 7 to

Moulding depth: 12mmm, working area: 100x70mm, max. coil diameter: 250mm, speed: 1-30 cycles/min, with documentation, the machine was never used.

Blister format: 70x110x13mm, output: 10-50/min, the machine was never used.

Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used.

Thermoforming machine TLT 2600 PP-film max. 260 mm Usable web width max 245 mm ( strip length max. 120 mm ) Strip configuration 2 lane , across Indexing max. 212 mm Depth of draw max. 10 mm Film speed max. 13 m/min Cutting die max 300 cycle/minute (or 600 blisters/min) Forming station max. 110 forming cycles/min Including inspection camera Leatus

2002 Blister machine Marchesini MB 440 for PVC - ALU. from 1992 Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 305 from 2002 • Continuous movement machine • Automatic blister feeding GUK leaflet folder Bar code reader Booklet feeder System coding for the cartons Range of work min. 25 x 15 x 65 mm Max. 100 x 85 x 150 mm • Speed ??up to 240 cartons per minute Check weigher Garvens S2 from 2000