used KLETT Punching Machines

Stanze PAGUS Stanze punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 punching brackets, punching unit Year of construction approx. 1990 Projection: 160 mm Punching capacity: 0.3 to 5 mm Material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Built-in is a round hole tool ø 5 mm Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brakeDimensions of punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition; used

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket projection 210 mm with punching tool -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA, punching bracket GN4 type PA80 400 with punching tool -Throat: 400 mm -Punching capacity: mm -Matrix: Ø 75 mm -Dimensions: 570/120/H140 mm -Weight: 27.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Punching machine EDEL - Maximum power: 25to. - Extension 26 cm - Height: 170cm - Width: 65cm - Depth: 50cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...

CNC punching machine make EDEL type Microcut 211Machine -No: 30287 Year 1998Punching force: 200 kNDirect working area: 1500 x 1000 mmTool size up to: 100 mm diameter, as well as forms: within this circular areaMaterial thickness up to: 4 mmfree passage up to approx. 30 mmWiper system: sprungTool System:: Noble Quick Change ::: Tool head 30x120 / 146x40Total connection value: up to: 16 kVA (400 V, 50 Hz) Protection class: IP54, control voltage 24 V,: DCWidth x depth x height: 3350 x 3750 x 1800 mmWeight: 7500 kgIncl.:- Mechanical and control technology REVO - M Basic equipment for the use of turret tools- ram stroke programmable (instead of manual adjustment)- CNC LOGO and programming with workpiece graphics- 1 set of set-up elements with leveling device- CNC CAD programmer software in standard version- 6-fold Rev. tools- Tools for Rev. Ø 4,2 - Ø 6,5 - Ø 8,5 / right 18x6 wide side fron ...

Maximum punching format: 730 x 1040 mm Max pressure: 300 tons Thickness: 0.1-2 mm Punching accuracy: ± 0.1 mm Maximum Investor pallet height: 1280 mm Maximum speed: 7,500 sheets / hour Machine weight: 15,000 kg Dimensions: Width length 260 cm height 582 x 386,5 x Power: 16 kw

Handle hole punch (bags) -Knuckle punch with punch and die for 20 x 90 mm handle hole -Suitable for bags or paper bags

Hydropneumatic functioning Punching power: 50 kN Height: 140 mm

Technical data: -maximum cutting force 300 kN -maximum punching diameter up to 88.9 mm -Max that material thickness 6.35 mm -Work area without putting up 1000 x 2000 mm -Actual workspace 1145 x 2100 mm -Work area normally with putting 1000 x 4000 mm -Size work table 1000 x 3500 mm -maximum working speeds of the axes 50 m / min -Max stroke sequence. 320 strokes/min -2 collets min. / max. distance 160-1900 mm -Need for compressed air 6 bar -Power supply 400 V / 15 kW -Space B 4200 x T H 3800 x 2250 mm -Weight approx. 6500 kg -with:-tool station 360-degree rotatable programmable 0.01 ° -CNC control - div. accessories in the separate tool Cabinet

Controlled turret punching machine, used controlled turettpunching machine, used Fabr.: EDEL Model: MICROMAT 207 HS Control/ control: LOGO 2000 (with workpiece graphics / with workpiece graphics) Built / year: 1997 Force/punching force: 20 t  Maximum sheet thickness/ max. thickness: 0.5 ... 5 mm Travel in X-axis/ travel in X : 1250 mm (expandable to / enlargeable to 2000 mm) Travel in Y-axis / travel in Y axis: 750 mm (expandable to / enlargeable to1000 mm) Punching speed / number of strokes: 20 per min Stroke stroke infinitely adjustable up to / stroke: 40 mm Punching example for steel punching 100 mm 1.5 mm ( punch diam. and thickn.) 50 mm 3.5 mm 16 mm 12.0 mm Machine weight/ weight 5 t Connection value / load: 14 kW

a good blanking press Krupp Model PEKRD 250h, 250 tons, year 1980/2005, overhauled 2005, with infinitely variable drive system and Siemens S7 controls, feed system for material 0.5-6 mm, 500mm wide. With decoiler 6 tons. Built as a double-sided C-frame press so that in- and outfeed front-to-back is possible

Busch BLS Die-Cutting machine for labels Age: 2017 Max. die cut size: 230 x 320 mm Min. cut size: 20 x 20 mm Max. stack height: 190 mm Die-Cutting pressure: 5700 kg Max. -Cutting strokes: 16 p/min Max. Performance: 960,000 sheets/hour With trolley and delivery tray With control panel With light barrier With waste conveyor With different die tools The die-cutter is most commonly used for cutting contours of large-sized labels, brochures, children's booklets, credit and loyalty cards, for die-cutting in a two-up system and for counter-pressure cutting with special material for inmould labels. The machines process high volumes of all types of products. These are just some of the wide range of items produced. Labels are, of course, the most important: -Labels of all sorts -Large-sized labels for tins and jars -Inmould labels -Stitched, folded and glued brochures  ...