We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Hydraulic hack saw Fabr. KLAEGER type HK 265Fabr. -No: 125014 built in 1993Cutting area 90 ° round: 265 mm90 ° flat: 220x260 / 225 x 225 mm45 ° round: 160 mm45 ° flat: 160 x 240 mmSaw blade size: 400 x 35 x 2 mmStroke length: 105 mmDouble strokes: 74/148 h / minCutting speed: 15.5 / 31 m / minFeed control: hydraulicDrive power: 1.6 / 1.9 kWDimensions L x W x H: 1400 x 500 x 900 mmWeight approx .:290 kgWith- hydr. Withdrawal in idle stroke- hydr. Eilhochgang- accelerated return stroke- miter vice- automatic shutdown- Cooling deviceused, from an operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Height under guides: 315 mm Throat: 0 mm Table length: 0 mm Table width: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat Hack saw Angle L / R Degrees L + R 90 / 45 Gr. Cutting capacity 90 ˚ Ø 315 mm Cuttting capacity 90 ˚ Flatt 315 x 200 mm Cutting capacity 45˚ Ø 200 mm Cuttting capacity 45 ˚ Flatt 200 x 300 mm blade dimensions 450 x 45 x 2 mm Cutting speed M/min 15 / 30 M/min
used
cutting diameter: 320 mm saw band length: 4150x1,1 mm cutting width: 600 mm total power requirement: kW weight of the machine ca.: 0,44 t dimensions of the machine ca.: m Fully automatic band saw roller conveyor Dimensions: 4000x700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
tube diameter: bis 3 Zoll piston stroke: 200 mm motor: 400 Volt total power requirement: 0,7 kW weight: 100 kg range L-W-H: ca. 1000 x 950 x 1100 mm urnishing: - electro-hydraulic pipe bending machine - various bending shapes included * e.g. bending segment: 3 / 2 1/2 / 2 / 1 - Universally usable for gas, boiling and water pipes - Fast work thanks to electro-hydraulic feed - with tripod stand for safe working - Also ideal for copper pipes and coated pipes - Bends can be produced up to 90° * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9360572 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Clockwise and anti-clockwise rotation of the rollers via foot switch Roll delivery: manual Shaft diameter: 50 mm Diameter of drive rollers and infeed rollers: 155 mm Stroke length vertical: 150 mm Roller speed: 9 rpm Motor power: 1.3 kW Dimensions: 900 x 700 x 1500 mm Bending performances: Flat upright: 60 x 10 mm, or 50 x 12 mm Solid material square: 35 x 35 mm Solid material round: 35 mm U-profile: 60 x 30 x 6 mm Round tube: 70 x 3 mm Square tube: 70 x 30 x 3 mm, or 60 x 60 x 3 mm Weight: approx. 350 kg
used
Clockwise and anti-clockwise rotation of the rollers via foot switch Roll delivery: manual Shaft diameter: 50 mm Diameter of drive rollers and infeed rollers: 155 mm Stroke length vertical: 150 mm Roller speed: 9 rpm Motor power: 1.3 kW Dimensions: 900 x 700 x 1500 mm Bending performances: Flat upright: 60 x 10 mm, or 50 x 12 mm Solid material square: 35 x 35 mm Solid material round: 35 mm U-profile: 60 x 30 x 6 mm Round tube: 70 x 3 mm Square tube: 70 x 30 x 3 mm, or 60 x 60 x 3 mm Weight: approx. 350 kg
used
Specifications: Sawing area 90° round / flat / quad: 265 / 300 x 150 / 200 x 200 mm 75° left/right round / flat / quad.: 265 / 280 x 150 / 200 x 200 mm 60° left/right round / flat / quad.: 250 / 250 x 150 / 200 x 200 mm 45° left/right round / flat / quad: 200 / 200 x 100 / 180 x 180 mm 30° li round / flat / quad: 130 / 130 x 100 / 125 x 125 mm Cutting speed: 17 - 100 m/min Band saw dimensions: 3280 x 27 x 0.9 mm Working height: 950 mm Drive power: 2.0 kW Connection: 400 V Weight, approx.: 390 kg Dimensions, (LxWxH), approx.: 1580 x 930 x 1400 mm Equipment: - Can be swivelled left and right - Highly stable saw frame - Easy to use - Emergency stop push button -CE
used
Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately
used
Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately
used
Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...
used
milling station Dust and schnitzel suction PVA (cold glue) back glue PVA (cold glue) side glue Gaze station Stack envelope feeder Envelope groove 2 to 6 times Still in operation: No Available: immediately
<br><br><br>Still in operation: Yes<br>Available: immediately
used
Size max 480 x 320 mm Speed max 18,000 c / h Equipment 1 feeder 3681
used
book-sewing machine
used
MEDIUM CUT FOR MÜLLER MARTINI 305
used
Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately
used
Pallets chain segment with duplex chain for transverse with SEW drive 4 lines L 3000 3 pallet transverse 3250,- 4 lines L 2100 2 pallet transverse 3050,- 4 lines L 1300 for 1 pallet transverse 2850,- 3 lane L 3000 3 pallet transverse 2960,- 3 lane L 2100 2 pallet transverse 2760,- 3 lane L 1300 for 1 pallet transverse 2560,- Altitude 600 mm +/-100 mm Base in painted version, V SQM A version for an additional fee
used
New machine editing by: wood, plastic, PVC, Fiberglass, Plexiglas, non-ferrous metals such as aluminum, brass, etc. Technical data: Auflöstung: 0,0018 mm X-Y-Z of precision trapezoidal thread spindles 12 x 3 mm All drive spindles are without triple play ball bearings Table size: 506 mm x 320 mm Traverse paths: x 215 mm, y 375 mm, z approx. 90 mm Passage about 78 mm Prices and further sizes on request
used
Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Eccentric press make MÜLLER type ExP 35Machine -No: 927171 built in 1971Technical specifications:Printing capacity: 35 tProjection: 220 mmRam strokes: 110 HpM.Adjustable ram: 53 mmAdjustable stroke: 1 - 70 mmTable surface area: 580 x 495 mmMotor power: 3.0 HPDimensions approx: 1100 x 1300 x 2000 mmWeight approx: 3500 kgWith- Protective screen- foot switch- height adjustable table- Protective screenused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Built in 2001 Size main product max 320 x 400 mm min 148 x 210 mm Size supplement min 320 x 400 mm min 105 x 148 mm Speed max 20.000 c/h min 4.000 c/h Working height feeder 1.100 mm Equipment o main product feeder (shuttle feeder for perfect bound books) o opening station with sucker and sword o 4 insert feeder o delivery to the right
used
Table eccentric press make MÜLLER type ExPT 12Machine -No: 0331188 built in 1988Technical specifications:Max. Punching capacity: 12 tProjection: 160 mmStrokes per minute: 120Slide adjustment: 40 mmAdjustable stroke: 8 - 80 mmTable size approx: 490 x 300 mmDrive power: 1.1 kWDimensions approx .: 2100 x 1200 x 1950 mmWeight approx: 2500 kgWith- pneumatic coupling- AMT material feed deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Eccentric press make MÜLLER type ExP 60 SV/HKMachine -No: 6030790Technical specifications:Max. pressing force: 60 tProjection: 280 mmInstallation height: 360 mmTable surface: 750 x 560 mmDrop Hole: 300*200mmTable adjustable: 160 mmRam area: 380 x 200 mmPlunger adjustability: 60 mmRam strokes per minute: 110Plunger adjustable: 10 - 90 mmMotor power: 4.0 kWWeight approx.: 3950 kgwith- Control SIEMENS Simatic OK 27- hydraulic clutch- adjustable table- Two-hand disengagement- straightening unit- Roller feed- Safety device according to UVVused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Muller Martini Chain for saddle stitchers
used
Stitching Machine