1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: used
Price: 2.000 €
Location: Land-nl NL Broek op Langedijk
Seller: BVA Auctions

Auction name: Bankruptcy A.T. Beukers B.V. (producer of wooden floors) in Broek op Langedijk Online auction Start of auction: 21 September 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 03 October 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

rotary biscuit moulding machine-\r\ncap. approx. 100 kg/h (depends on the cylinder)\r\nworking width 250 mm more

New in: 1994
Price: 88.100 €
Location: Land-de DE Obermaßfeld b. Würzbg
Seller: LM Dairy Consulting

D 106 1 Krones bottle filling plant Capacity 12.600 bottles per hour Manufacturer year is 1994, existing about: Pos. 5.1 1 KRONES crate up packing machine until to 12.600 bottles per hour int. No. 57 Type Linatronik, Manufacturer year is 1994 Pos. 5.2 1 Krones crate washing machine is not for sell, is home requirement Pos. 5.3 1 KRONES bottle lid screw off is not for sell, is home requirement Pos.5.4 1 KRONES bottle washing machine is not for sell, is home requirement Pos. 5.5 1 KRONES bottle inspection machine until to 12.600 EH/h int. No. 61, possible bottle neck diameter are: d: 86; d 67; d 57-86 Manufacturer year is 1994, Pos. 5.6 Augen ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

for making rustic-square rolls, capacity approx. 7.000 pcs./h \r\ndoughweightrange 40 - 150 g - depends on the dough,\r\nstainless steel coverplates, righthand - operation\r\n2 flour duster at the infeed\r\nwithout electrical control pane more

New in: 1991
Price: 9.700 €
Location: Land-de DE 51465 Bergisch-Gladbach, Kürtener Strasse 13
Seller: Kandlin Stromerzeuger-Ankauf GmbH

Deutz TBD 234 V08 diesel generator with 280 KW and 400 volts in good running condition for sale. Only 340 working hours. Scope of supply: Control pannel,two mufflers,batteries,diesel fuel tank,oil tank. engine: Deutz type: TBD 234 V08 powerrating: 280 KW running hours: 340 YOM: 1991 generator end: Leroy Somer voltage: 400 volts powerrating: 250 KVA speed generator:1.500 r/min fuel: diesel Price: 9.700€ FCA in our warehouse D-Bergisch Gladbach. Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

with 3 edges\r\nminimum taking 10 trays\r\n more

New in: 2011
Price: 33.300 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Machining center - vertical HARTFORD VMC 1270 bearing no 1105-02485 category machining center - vertical make HARTFORD type VMC 1270 year 2011 State second-hand machine CNC CNC FANUC I OM storage France country of origin Taiwan Lieferzei t January x trail 1270 mm y route 635 mm z route 635 mm table size 1370 X 600 mm speed range - milled 60-8000 RPM CNC FANUC I OM power - Milling spindle 15 kW BT 40 tool holder number of tool magazine stations 30 stations feed range 1-10000 mm / min speed: 30 m/min total power 30 kW machine weight 5500 kg space requirement approx. 2300 x 2400 x 2600 mm accessories full protection - fairing complete machine documentation central lubrication RS 232 data int ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

continuous-spraying, moveable,\r\nworking width 900 mm, free gap 280 mm,\r\ncap. approx. 8-10 plates /Min.\r\nequipment: input table, continuous - spraying, \r\noutfeed table more

New in: 2005
Price: request quote
Location: Land-de DE 78267 Aach, Im Hirtenstall 16
Seller: Martin Beschle Werkzeuge & Maschinen GmbH

CNC universal - milling & drilling machine lid MAHO DMC duoBlock 100 U With train control HEIDENHAIN iTNC 530 Year of construction: 2005 Traverse paths: X 1000 Y 1000 Z 1000 Speed range: 20 - 18,000 rpm continuously (SK 40) with the following accessories: NC rotary table with pallets 1000 x 800 mm clamping surface (6 x) Universal milling head with controlled B axis Automatic Swivel Head 120 x tool changer Double gripper (SK 40) 4 x pallet changer (RS 4) Mode 3 + 4 Electronic Handwheel 3 D probe HEIDENHAIN TS 641 Tool measurement in serial work space. BLUM laser IKZ 40 bar Chip conveyor Rotoclear Full cab with interior lighting Integrated chip augers for chip removal ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

type JB 260, working width 256 mm, \r\n2 speeds, cap. max. 50 + 42 strokes/min.\r\naccessories: wire cut (1 design), 4 rows,\r\ninput by a chain for plates 256 x 625 mm more

New in: 1990
Price: request quote
Location: Land-at AT
Seller: GINDUMAC GmbH

Overview BRAND: DECKEL MAHO YEAR: 1990 MODEL: MH 800 E PRODUCTION HOURS: 7167 APPLICATION TYPE: MILLING LOCATION: AUSTRIA MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: PHILIPS GINDUMAC ID: AT-MIL-DEC-1990-00001 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2900 MM MEASUREMENTS DEPTH: 2400 MM MEASUREMENTS HEIGHT: 2300 MM MACHINE WEIGHT: 4400 KG CONTROL UNIT BRAND: PHILIPS MODEL: CNC 532 CNC MAIN LANGUAGE: GERMAN MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 4500 1/MIN MOVEMENT X-AXIS MOVEMENT: 800 MM Y-AXIS MOVEMENT: 500 MM Z-AXIS MOVEMENT: 550 MM TABLE OUTER LENGTH: 1100 MM OUTER WIDTH: 600 MM MEDIA M ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

dimension of wafer sheets 360 x 450 mm\r\n1. cut 32 mm \r\n2. cut 30 mm\r\nstacking height approx. 5 - 80 mm\r\n more

New in: 2004
Price: request quote
Location: Land-de DE 83679 Sachsenkam, Bergstr. 8a
Seller: Bäckereimaschinen An - und Verkauf

Sell a W & P Rotomat en dough part and grinding machine. Machine is fully functional, well preserved little hours. more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 780 mm\r\n more

New in: 1996
Price: request quote
Location: Land-at AT
Seller: GINDUMAC GmbH

Overview BRAND: DECKEL MAHO YEAR: 1996 MODEL: MH 600 W PRODUCTION HOURS: 69111 APPLICATION TYPE: MILLING LOCATION: AUSTRIA MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: PHILIPS GINDUMAC ID: AT-MIL-DEC-1996-00001 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 3100 MM MEASUREMENTS DEPTH: 1800 MM MEASUREMENTS HEIGHT: 2200 MM MACHINE WEIGHT: 3000 KG CONTROL UNIT BRAND: PHILIPS MODEL: CNC 532 CNC MAIN LANGUAGE: GERMAN MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 4500 1/MIN MOVEMENT X-AXIS MOVEMENT: 600 MM Y-AXIS MOVEMENT: 400 MM Z-AXIS MOVEMENT: 400 MM TABLE OUTER LENGTH: 900 MM OUTER WIDTH: 480 MM MEDIA MA ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

include timer, tartlett device T 13 (13 pcs. d 75 mm)\r\nelectr. 230 V, 3,2 KW,\r\n more

New in: 1991
Price: 3.000 €
Location: Land-nl NL Broek op Langedijk
Seller: BVA Auctions

Auction name: Bankruptcy A.T. Beukers B.V. (producer of wooden floors) in Broek op Langedijk Online auction Start of auction: 21 September 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 03 October 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

analogical control, baking-chamber for 1 rack, \r\nfor plates 580 x 780 mm, include water filter\r\ngasburner + water filter are new more

New in: 2008
Price: 48.000 €
Location: Land-de DE Obermaßfeld b. Würzburg
Seller: LM Dairy Consulting

A 1 111 1 sterile tank with 30.000 l Manufacturer year 2008 working pressure: 3,2 bar to -1,0 bar working temp. 30° to 145° is standing on 4 feet, withan automatic working sterile valve knot The bottom of the tank has 30% slint to the middle of the tank with electronic cabinet and with Display to attent to the automatic system with Siemens S 7 control system with CIP back flow centrifugal pump Price up standing point: 48.000,00 Euro more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

doughweightrange 40 - 150 g, capacity approx. 7.000 pcs./h\r\nrighthand - operation include \r\ndivider, 5 rows, \r\ndepositing device \r\n working width 600 mm\r\n max. setting length 2000 mm\r\n variable speed more

New in: 2017
Price: 20.000 €
Location: Land-nl NL Broek op Langedijk
Seller: BVA Auctions

Auction name: Bankruptcy A.T. Beukers B.V. (producer of wooden floors) in Broek op Langedijk Online auction Start of auction: 21 September 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 03 October 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

f.e. for baking baguette with cheese more

New in: used
Price: request quote
Location: Land-de DE 25462 Rellingen, Tangstedter Chaussee 70
Seller: Cortelia Systems GmbH

Valve bag FüllmaschineHersteller: Natronagmanuelle Bedienungdie engine is offered in the completely revised State more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

working width 450 mm, thickness 10 mm,\r\nlubrication system for the knives\r\n more

New in: used
Price: 370 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Spindle press for stone production of alumina Built in 1930 Weight approx. 500 kg L x W x H: 120 x 80 x 190 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12 more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

for the depositing of cream, jam and other sandwich mixes\r\ncap. adjustable max. 22 strokes/min. \r\nworking width max. 600 mm, \r\naccessories: \r\n-1 depositing with straight device, 6 rows\r\n-chain with plastic holder 600 x 110 mm on this can be put\r\n biscuits in 6 rows for depositing cream on\r\n more

New in: used
Price: 2.500 €
Location: Land-de DE 04838 Eilenburg, Weinbergstr. 9
Seller: MMD-Food-Technik GmbH

FESSMANN Gas boiling pans plant Technical data Type: NOVA 809 400 litres Nominal heat: 40.9 kW digital control 230V / 50 Hz / 6A Boiler complete stainless steel! Thermodeckel Gas heating: natural gas Dimensions: x B130 height 126 cm x D with closed lid H110 Basin size: H46 x B110 x t 80 cm B / No.: 97/143 According to previous owner new burner installed in 2012 Control: Fessmann DP K See pictures original condition & accessories! Very good and well maintained condition. The engine has been serviced regularly by the Fessmann customer service and was until recently in operation. If you have questions, email or call. more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 780 mm, \r\ncomplete assembled loaded\r\n more

New in: used
Price: 260 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Flower pot press for alumina production with breakf. Forms Built in 1936 Weight 600 kg L x W x H: 150 x 70 x 190 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12 more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

table-model with movable table\r\nworking width 400 mm, thickness 10 mm,\r\nlubrication system for the knives more

New in: 2008
Price: 134.000 €
Location: Land-de DE Obermaßfeld bei Würzburg
Seller: LM Dairy Consulting

A1 103 Raw milk „cold standardisation for UHT processing ESL milk production without pasteurizing processing with the Alfa Laval OSA-cold processing Out of a closed dairy we could offer an ESL milk production from cold raw milk without pasteurizing before UHT heating is following. Alfa Laval OSA-cold milk standardisation existing about: 1 automatic control system with Siemens S 7 300 Type: Alfa Laval Alfast B&R PC manufacturer way is 2008 1 raw milk balance tanks station with 2 balance tanks with IDM flow measurements with 2 centrifugal pumps manufacturer year is 2008 1 Alfa Laval cold milk separator Type Tetra Centri 614 Capacity: 15.000 l/h (it  ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 980 mm\r\ncomplete assembled loaded\r\n more

New in: 1997
Price: request quote
Location: Land-de DE 76646 Bruchsal - Büchenau, Neutharder Str. 24a
Seller: KAI-Tec Technologie-Vertrieb GmbH & Co.KG

BAND SAW MACHINE BUILDERS HS 260 A - 19-03-034 Shipping time: immediately Number: 19-03-034 Manufacturer: Bauer Type: HS 260 A MACHINE DATA Year of construction: approx. 1997 L x W x H: CA. 2100 x 2000 x 1500 mm Weight: approx. 700 kg Good general condition TECHNICAL DATA Band saw blade dimensions: approx. 3900 x 27 x 0,9 mm Cutting area: About: approx. Ã? 260 mm Square: approx. 240 x 240 mm Flat: approx. 320 x 240 mm Automatic material feed: approx. 3-500 mm Multiple feed: Yes Material height: 780 mm Cutting speed: approximately 30-120 m / min Power: approx. 2,2 kW ACCESSORIES â?¢ Coolant system â?¢ 1 piece blade  ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

filling of the funnel over foto-cell-control\r\napportionment from the streusel over the thorn roll\r\nvariable speed, working width 600 mm more

New in: used
Price: 290 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Drilling Schweizerische Maschinenfabrik Oerlikon Built in 1936 Weight approx. 1100 kg L x W x H: 160 x 80 x 220 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12 more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 780 mm\r\ncomplete assembled loaded\r\n more

New in: 1998
Price: request quote
Location: Land-de DE 76646 Bruchsal - Büchenau, Neutharder Str. 24a
Seller: KAI-Tec Technologie-Vertrieb GmbH & Co.KG

HORIZONTAL BAND SAW BAUER S 320 GL - 19-01-005 Shipping time: immediately Number: 19-01-005 Manufacturer: Bauer Type: S 320 GL MACHINE DATA Year built: approx 1998 L x W x H: CA. 2100 x 1600 x 1800 mm Weight: 800 kg Very good condition TECHNICAL DATA Band saw blade dimensions: approx. 3900 x 27 x 0,9 mm Cutting capacity: 90 degrees About: approx. Ã? 320 mm Square: approx. 230 x 230 mm Flat: approx. 450 x 230 mm Cutting capacity: 45 degrees About: approx. Ã? 270 mm Square: approx. 240 x 240 mm Flat: approx. 325 x 240 mm Cutting capacity: 60 degrees About: approx. Ã? 240 mm Square: approx. 210 x 210 mm Flat: approx. 240 x 210 mm MI ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

include \r\nfeeding conveyor\r\nprecrusher\r\ntransportpneumatik\r\nswing-screen-dryer \r\nexhaustair-filterstation\r\nheating system/heat exchanger\r\nheat recovery \r\npipelines\r\nbreadcrumbmil\r\nbuffer silos\r\nswitch box/electrical panel\r\n more

New in: used
Price: 795 €
Location: Land-de DE 04838 Eilenburg, Weinbergstr. 9
Seller: MMD-Food-Technik GmbH

Semi-automatic bread gate machine JAC Type: MJM 450 / 9 Technical data: 400 v / 1.5 W / 3.8 A manual feed Thickness: 9 mm suitable for breads up to 45 cm Transportable base Weight: 110 kg Overall dimensions: WxDxH 65 x 66 x 140 cm = The machine works fine. State see original pictures. If you have questions, email or call. more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 780 mm\r\ncomplete assembled loaded more

New in: used
Price: 1.980 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Spindle press Reissmann AG Saalfeld-Saale for stone production of alumina Built in 1951 Weight 4000 kg L x W x H: 220 x 150 x 300 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12 more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

continuos workingwize\r\ncap. approx. 3.500 breads/h\r\naccessories: suction unit, conveyor (inside of \r\n the machine) for tins and bread \r\ncondition as it is more

New in: 2004
Price: request quote
Location: Land-it IT 08018 Kaiserslautern, Trippstadter Str. 110
Seller: GINDUMAC GmbH

OVERVIEW: Brand: TRAUB Model: TNC 42 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2004 Production hours: 41067 Location: Italy Origin country: Germany GENERAL DATA: Measurements width: 4250 mm Measurements depth: 2800 mm Measurements height: 1917 mm Machine weight: 4800 kg MAIN DRIVE: Number of spindle: 2 Spindle speed range: 5600 1/min CONTROL UNIT: Brand: TRAUB Model: System TX 8H MOVEMENT: X-AXIS movement: 140 mm Y-AXIS movement: ±35 mm Z-AXIS movement: 450 mm WORKPIECE: Workpiece drm: 192 mm Workpiece x: 140 mm Workpiece y: 450 mm TURRET: Number of turrets: 2 MEDIA: Main electronic connection: 40 ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

Modell 650.460.11.35.20, semi automatic\r\nworking width 460 mm, thickness 11 mm,\r\nlubrication system for the knives\r\n more

New in: 2011
Price: request quote
Location: Land-de DE Baden Württemberg
Seller: METEC GmbH

CNC universal machining center Manufacturer: Coarse Type: G-350 Year of construction: 2011 CNC control: Siemens 840 d SL Traverse paths: X/Y/Z = 600 x 770 x 675 mm Pallet changer: 400 x 400 mm Tool changers: 99-fach + 10 separate courses Tool holder: HSK A63 Probe Hexagon Chip conveyor Weight: 12,000 kg Reference No.: WEI1300 Machine suitable for: 5-sided machining Space holes and angles Forms and flow profiles Precision parts more

New in: used
Price: 5.400 €
Location: Land-de DE 56322 Spay, Mainzer Str. 70
Seller: Wilbert Medizintechnik

O L Y M P U S Video endoscopy Tower 1 IMAGING TROLLEY TI 1900 1 processor 140 CV 1 LightSource CLV-U40 1 Video Endoscope BF 1T 160 with follow specifications: Diameter: 6.0mm Working length: 60cm Instrument channel: 2.8 mm Field of view: 120 degrees Angulation range: Up: 180, down: 130 1 televison monitor SHARP (NEW) including a biopsy forceps. Worldwide shipping at the best packaging more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

with integrated crescent-roll-\r\nmachine with infeed conveyor and centering\r\ntype LWT 3/600 EB 2/200 40 J,\r\nfabr. Kasper-Universum, stainless steel\r\ncap. max. 2.500 pcs. /h, doughweight 15 to 250 g,\r\n(its an estimation - it depends from the dough, doughweight, worker) \r\nmoulding machine working width 400 mm\r\nmachine with 2 moulding levels + 2 pressure plates\r\nmoulding belt 600 mm\r\nupper pressure plate 1000 x 585 mm\r\nbelow pressure plate 1460 x 490 mm\r\nproduct range: pretzels, beer sticks, salt sticks, baguettes, more

New in: used
Price: 390 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Double shaft grinder of August jade Maschinenfabrik Frauenfeld Built in 1940 Weight approx. 1100 kg L x W x H: 150 x 80 x 110 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12 more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

stainless steel construction, belt made from plastic\r\nbelt: width 700 mm, length 6000 mm\r\nframe: width 780 mm, height 200 mm more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more KING types: