Category: 304 thermoforming machines / Thermo forming machines
Latest update: 21.03.2024 add to watchlist
approved
dealer
item-No.: 161422981

used

check Seller: GESTION DE TERMOPLASTICOS
Location: Land-es

add to watchlist

Thermoforming Machine Brand: Kiefel, model: 76/225F. It shapes and cuts by vacuum pieces from rolls of PPE that are previously heated in the oven. Everything goes online, fully automatic and includes all empty aurxiliars, refrigeration, mold change trolleys, etc. Forming area: 760x2250 mm max, workpiece height: 220 mm pos. max, 30 mm neg. max, upper cutting force: 30 KN, lower cutting force: 30 KN, sheet line: 1575 mm, vacuum: 500 m 3/h, cycle time: ca. 20 sec (material dependence), glue type: butyl or hot melt glue, glue application speed: mx. 400 mm/sec (depending on the contour and type of glue), applicator head control: amount of glue depending on speed, tool change time: less 5 min, measures: 25500x6000x4600 mm.

Category: 304 thermoforming machines
Latest update: 07.04.2016 add to watchlist
item-No.: 948151
New in: 1995

used

Seller: Tecplast e. K. Machinery
Location: Mülheim Land-de

add to watchlist

Technical details material.: OPS, APET, PP, HIPS, ABS Forming area (VxH): 520 x 400 mms Depth of draw: 120 mms of material thickness (max.): 1.50 mms of technical details heating, moulding and cutting. This machine has the BFS system which allows to cut in place in the forming station Forming area: 520 x 400 mms of Max sheet width: 590 mms No of cycles are very much depending on the product. However we have been producing more different products with up 50 cycles by minute, but they were no deeper than 40 mms. All movements are 140 mms with a recommended max. depth/hight of 120 mms We have been producing OPS, APET, PP, HIPS and ABS on the machine. The read few years mainly HIPS and APET The thicknest material we have been producing, were 2.0 mms HIPS, but I wants recommend more than 1.5 mms HIPS.

Category: 302 extruders
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163670297
New in: 2001

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Drive power: 110kW, with reversing Film Take-Off Kirion T 1300, Monoblow Head Kirion 120/300-1, further accessories and documentation.

Category: 304 thermoforming machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163670303
New in: 2004

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018.

Category: 304 thermoforming machines
Latest update: 28.03.2024 add to watchlist
item-No.: 162905490
New in: 1993

used

Seller: Exapro
Location: Land-fr
Price: 46.000 € add to watchlist

DESCRIPTION KIEFEL Model: KL 1 SH 52 BFS + KVH 83 Preheating Model type Nr.34.322-08.35, Identity.Nr. 100-035, Tp-No. 157/93 Year of construction - 1993 Forming Area: 540x420mm Film Width: 570mm Foil thickness: min 0.2mm - max.3mm Depth of draw positive / negative : 140mm / 140mm Materials: PET, PVC, PP, PS, HIPS Condition - in use, in production Location: Bucharest, Romania, 050192 Other details: - Number of stations : 5 - Preheating, Forming, cutting in mold, punching, stocking. Preheating for PP foil, model KVH 83, 2050/2200 / 2550mm, Length 2950mm, Width 1400mm, Weight 700Kg, max 150 Celsius degrees - the documentation in original (5 books) + scanned (PDF files) - a lot of spare parts - we have the software saved - working pressure: 6 bar - voltage: 3x400V + N + PE, 50Hz - dry cycle strocke / min ...

Category: 304 thermoforming machines
Latest update: 28.03.2024 add to watchlist
item-No.: 162905491
New in: 2002

used

Seller: Exapro
Location: Land-fr
Price: 62.500 € add to watchlist

Automatic Roll-Fed Kiefel KMV 50D machine Year: 2002 Maximum forming area: 500 x 350 mm Minimum forming area: 300 x 100 mm Max tool dimensions: 516 x 366 mm Forming height above - below Material: 120/40 mm Suitable materials: PS, OPS, EPS, PP, PE, PVC, APET, CPET, RPET Maximum sheet width: 545 mm A / B stacker Pressures Max. Max. 2.5 bar Cycles / min: 35 Approx. Length: 10,300mm Approx width: 2100 mm Approx.Height: 2200mm Weight: 6700 kg Machine in production

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 137466795
New in: 2000

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger, 93 Spenger Str., 32130 Enge Land-de
VS

add to watchlist

Gabler D600 Thermoformer, age 2000:- Unwind Stand Indramat Servomotor Indexing. Top & Bottom Heaters, total Capacity 73.9 kW Indramat Servomotor Forming Station Forming area: 600 x 320 mm Depth of draw neg./pos.: 40/15 mm Stacking and counting Station Counted/ Stacked Products transferred automatically to Delivery Conveyor Waste Material Winder Main Machine PLC Controller: Siemens SIMATIC S5 P3 3A Heater PLC Controller: Siemens SIMATIC S5 95U Operator Touch Pad Control Panel (OPC) : Siemens SIMATIC OP27 Machine has been refurbished in 2014, New set of Cams added during Refurbishment. Excellent Production Condition

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 140125862
New in: 1995

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger, 93 Spenger Str., 32130 Enge Land-de

add to watchlist

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 140840042
New in: 1989

used

check Seller: SAMPLAST GmbH
Location: Land-de
VS

add to watchlist

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 150397314
New in: 1990

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger Land-de
VS

add to watchlist

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 22.02.2024 add to watchlist
approved
dealer
item-No.: 152692900
New in: 2021

used

check Seller: TechModus LT
Location: 09133 Vilniaus Land-de
Price: 10.000 € add to watchlist

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 01.03.2024 add to watchlist
approved
dealer
item-No.: 153054774
New in: 1988

used

check Seller: MJS-LINE GmbH
Location: Land-ch

add to watchlist

M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 153944754
New in: 1993

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger Land-de
VS

add to watchlist

ILLIG RDM 45/ 3 Lid forming Line, age 1993 : Auto unwind stand, Max. Roll dia. 1200 mm 2 x Roll Preheater ILLIG VHW 72/ 2 Indramat Servomotor Indexing Double Heating Oven, Total Capacity 20.35 kW Sheet Sag Control Max. Form Area 450 x 170 mm Max. material width 480 mm Max. indexing 175 mm Max. Depth of Draw female/ male 30/ 15 mm Max. cutting length 1400 mm Auto Transport Rail Spreading for PP Max. No. of Dry cycles 56 cycles/ min Finished Products are Trimmed in-Mold & discharged upwards through the Tool. Forming Station with SEW Movitrac Drive. With Encoder on Main Shaft Encoder connected to Schleicher PLC unit Counter/ Stacker Station, with Stainless Steel discharge Chute Waste Material Rewinder Central Lubrication System

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 153944756
New in: 1988

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger Land-de
VS

add to watchlist

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder * ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 161944906
New in: 1988

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 116.670 € add to watchlist

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 10.08.2023 add to watchlist
approved
dealer
item-No.: 162166464
New in: 2010

used

check Seller: Prola Ltd
Location: 0 Gloucester Land-uk

add to watchlist

Make WM Model FC 780E Speedmaster Year 2010 Condition Very Good Hours approx 21500 Delivery Date Immediately Stations Forming, Cutting and Stacking Max Tool Size 780 x 570 mm Depth of Draw 130 / 130 mm Max Material Width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Forming pressure 7 bar Maximum cycles-minute 45 Total Connected Load 140 Kw Approx Total Length 11000 mm Approx Width 5000 mm Approx Height 2550 mm Approx Total Weight 11000 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 10.08.2023 add to watchlist
approved
dealer
item-No.: 162166466
New in: 2007

used

check Seller: Prola Ltd
Location: 0 Gloucester Land-uk

add to watchlist

Make WM Model FC 780E Year 2007 Condition Excellent Hours approx 29950 Delivery Date Immediately Stations Forming, Cutting and Stacking Max Tool Size 780 x 570 mm Depth of Draw 130 / 130 mm Max Material Width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Forming pressure 7 bar Maximum cycles-minute 45 Total Connected Load 140 Kw Approx Total Length 11000 mm Approx Width 5000 mm Approx Height 2550 mm Approx Total Weight 11000 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 21.02.2024 add to watchlist
approved
dealer
item-No.: 163407231
New in: 1986

used

check Seller: USTA - Graphische Maschinen
Location: 74626 Bretzfeld Land-de

add to watchlist

Illig RDM 37/10 Thermoforming Line - Made in Germany - Year of construction: 1986 - Under & Top Heating - DIV - Moulding area: 475 x 250 mm max. - Film width: 495mm min / 150mm max. - Refurbished: new bearings, new bolts, new bushings & electronics, etc. - Fully functional - with many accessories - several different forming tools Produce cups, bowls and similar products with the ILLIG RDM37/10 pneumatic forming machine. The thermoformer with forming/stamping technology works reliably with precision mechanical drives and delivers high molded part quality and performance.

Category: 304 thermoforming machines
Latest update: 01.03.2024 add to watchlist
approved
dealer
item-No.: 162329806
New in: 2000

used

check Seller: MJS-LINE GmbH
Location: 9220 Bischofszell Land-ch

add to watchlist

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...

Category: 304 thermoforming machines
Latest update: 01.03.2024 add to watchlist
approved
dealer
item-No.: 162336408
New in: 1999

used

check Seller: MJS-LINE GmbH
Location: 9320 Arbon Land-ch

add to watchlist

THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) M. No.: 322 Counter: 80188 hours // Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Kuhne Extruder KF70E & Co. Extruders K45-24D -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Thermoforming machine ILLIG RDM K 50 -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -Illig mill RS75B // Age: 1999 Fully existing infrastructure; control cabinets, pumps, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 01.03.2024 add to watchlist
approved
dealer
item-No.: 162965282
New in: 1992

used

check Seller: MJS-LINE GmbH
Location: Land-ch

add to watchlist

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 01.03.2024 add to watchlist
approved
dealer
item-No.: 163104517
New in: 1999

used

check Seller: MJS-LINE GmbH
Location: 9320 Arbon Land-ch

add to watchlist

M. No.: 322 // Counter: 80188 hours Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -ILLIG mill RS75B // Age: 1999 Control cabinets, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Category: 702 breadmaking and confectionery machines
Latest update: 30.11.2022 add to watchlist
approved
dealer
item-No.: 1264404

used

check Seller: Anbox
Location: Malkinia Gorna Land-pl

add to watchlist

Daub baking master 22.5 m and * 178 stove is a state in TOP general and thorough outdated. functions as anew. anew steam apparatus. anew elektrik anew hearthstones incl. Daub Thermooel-boiler arrangement sales incl. cargo and assembly on inquiry I also have to sell other uberholt DAUB oven THERMO-OEL price on inquiry contact: + 48 692 345 660 anbox.pl

Category: 702 breadmaking and confectionery machines
Latest update: 20.03.2023 add to watchlist
approved
dealer
item-No.: 3631845

used

check Seller: Anbox
Location: Malkinia Gorna Land-pl

add to watchlist

Daub Backmeister 18m² Furnace is in TOP condition, General and thorough overhaul. Works like new. New steam apparatus. New electrics New cooking hobs incl. Daub thermal oil boiler system Sale incl. freight and assembly on request I also have to sell other overholt DAUB oven THERMO-OEL Price on request Contact: +48 692 345 660 anbox.pl

Category: 702 breadmaking and confectionery machines
Latest update: 20.03.2023 add to watchlist
approved
dealer
item-No.: 4360451

used

check Seller: Anbox
Location: Malkini Gorna Land-pl

add to watchlist

Stove is in excellent condition, General and thorough overhauled. Works like new. New steam apparatus. New electrics New stove incl. daub thermal oil boiler plant Sales including freight and installation upon request I also have to sell other uberholt DAUB oven THERMO oil Price on request

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
KIEFEL 3rd category level
  • KIEFEL thermo forming machines (1)
 
RESALE used machinery 25 years online