Category: 102 lathes / Turning Machines (Lathes)
Latest update: 31.12.2023 add to watchlist
approved
dealer
item-No.: 157647943

used

check Seller: DLS
Location: Land-de

add to watchlist

Lathe brand KERN

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 27.02.2024 add to watchlist
item-No.: 163458676
New in: 1981

used

Seller: PX-Maschinenhandel
Location: 73635 Rudersberg Land-de
Price: VB 2.600 € add to watchlist

Key data: 560 mm, 1200 mm, 380 mm

Lathe Core Three-jaw chuck Multifix B 2 Holder Spindle bore 52 mm Speeds 38 - 1900 rpm Steels Chuck Sharpen 380 V 25 A Length 2.80 m Width 1.00 m Height 1.60 m

Category: 103 milling machines
Latest update: 29.03.2024 add to watchlist
item-No.: 163676815
New in: 2000

used

Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.

Category: 818 presses: other
Latest update: 01.03.2024 add to watchlist
approved
dealer
item-No.: 72506038
New in: 2008

used

check Seller: MJS-LINE GmbH
Location: Land-ch

add to watchlist

PRECISION SCALE Ser. No.: WF131434 Readability (d) : 0,01 g Weighing range (max) : 3000 g Reproducibility : 0.01 g Linearity : ±0,03 g Smallest part wight for piece counting : 20 mg Reference quantities at piece counting: 10, 20, 50, 100, 200 Weighing Units: g, ct, Ib, oz, d, ozt, dwt, mo, tl h, tl c, tl t, t, bt, n Recommended adjustment weight, not added (class): 3000 g (F1) Warm-up time: 2 hours Stabilization time (typical): 3 sec Operating temperature : + 5° C .... + 35° C Humidity of air: max. 80 % (not condensing)

Category: 102 lathes / CNC Turning Machines
Latest update: 07.12.2023 add to watchlist
item-No.: 161342163
New in: 2004

used

Seller: Keetels Machines BV
Location: 5482T Schijndel Land-nl
Price: 13.500 € add to watchlist

Control: HEIDENHAIN Manual Plus max. turning diameter over bed: 340mm max. turning diameter over slide: 150mm max. turning length turning length: approx. 580mm Wheelbase: 750mm Spindle bore: 52mm max. main spindle speed: 1 - 4,000 rpm Main spindle DIN 55027 Bayonet: Wedge bar chuck FN RHU-200 Collet by hand: F48 8-fold SAUTER tool turret Tool holder: VDI-16 Tailstock with quill diameter: 60mm Travel: 140 mm Tool cone: Mk 4 Space requirement L x W x H: approx. 2.50 x 1.60 x 1.70 meters Dimensions control cabinet L x W x H: approx. 1.25 x 0.5 x 1.7 meters Machine weight: approx. 2'400kg Note: This machine is not located in Schijndel, but in Eersel.

Category: 836 post press: other
Latest update: 26.01.2024 add to watchlist
approved
dealer
item-No.: 138250331
New in: 2008

used

check Seller: Autoglas Fahrzeug Handel
Location: 46395 Bocholt, Ernststraße 10 Land-de
Price: VB 7.250 € add to watchlist

Used KERN K980 paper-endless cutting machine. The continuous cutter meets all the requirements of computer printout processing at maximum speed. The proof is 34,200 high-quality cuts per hour.

Category: 103 milling machines / CNC Tool-Milling Machines
Latest update: 02.10.2023 add to watchlist
approved
dealer
item-No.: 158914236
New in: 1997

used

check Seller: LUSAMATEX - Máquinas Têxteis, Lda.
Location: 4430 Vila Nova de Gaia Land-pt

add to watchlist

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

Category: 103 milling machines / CNC Milling Machines
Latest update: 18.12.2023 add to watchlist
approved
dealer
item-No.: 160405593
New in: 2000

used

check Seller: DenTool LTD
Location: 0 Naestved Land-dk

add to watchlist

Stock number: 3736 PROCESSING Manufacturer: KERN, Type: HSPC 25-16 Machine NO.: 436, Year of construction: 2000 Specifications: Longitudinal movement (X) 250 mm Transverse movement (Y) 220 mm Spindle speeds 35000 rpm Total power 10 kW A-ash B: Aschse Grad Control HEIDENHAIN 426 M Fabr. Controlled in axes 3+2 Accessories: CNC rotary table. Cooling water system. Length: 2100 mm, Height: 2300 mm, Width: 1700 mm, Weight: 3500 kg

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 26.03.2024 add to watchlist
approved
dealer
item-No.: 161389153
New in: 2013

used

check Seller: D'Cunha Industriemaschinen GmbH
Location: Land-de

add to watchlist

Vertical 3-axis CNC machining center with nano precision Kern Pyramid Nano Year of construction: 2013 Heidenhain iTNC 530 Table size: 600 x 600 mm Table load: max. 250 kg Longitudinal travel: X 500 mm Transverse travel: Y 500 mm Vertical travel: Z 400 mm Smallest travel increment: 0.1 μm Feeds up to: X/Y/Z 30,000 mm/min. Rapid traverses up to: X/Y/Z 30,000 mm/min. Acceleration: X/Y/Z 10 m/s² Vector-controlled milling spindle: Spindle mount: HSK-25 Spindle drive power: 6.4 kW AC Spindle speeds: 500 - 50,000 rpm. Spindle torque (S1): max. 1.6 Nm Automatic tool changer: Tool magazine positions: 32-fold Tool holder: HSK-E25 Tool Ø (every second place free): max. 60 mm Tool length: max. 160 mm Tool change time: 3 sec. Chip-to-chip time: 6 sec. Machine weight: approx. 8,000 kg Machine height: LxWxH 2,850 x 3 ...

Category: 103 milling machines / CNC Milling Machines
Latest update: 27.11.2023 add to watchlist
item-No.: 161457875
New in: 2008

used

Seller: Locherschmuck GmbH
Location: Land-ch
Price: VB 198.000 CHF add to watchlist

Year of manufacture: 2008, Machine No.: 670 - Working range X 300, Y 280, Z 250 mm - Feed speed 0.01 - 16,000 mm/min - Acceleration 8 m/s2 Resolution: 0.1 μm Position spread Ps: ±0.5 μm CNC precision dividing head (4th and 5th axis) - System 3R Macro Chuck - Brushless servo drive, fully digital - Feed speed C/B 7000 / 3000 °/min - Swivel range B from -10 to +120 degrees - Heidenhain iTNC 530 smarT.NC - High frequency coil HSK E25 500 -50'000 rpm - Tool changer 95-fold - Prepared for external workpiece changer - Minimum quantity lubrication -Suction - CO2 extinguishing system - Laser for tool measurement (Blum) - Infrared 3D probe - External dry cooler - External spindle cooling unit - External coolant device with cooling - Vorma machine light Accessories - Shrink device Haimer Power Clamp Nano - HSK E25 mounts (CORE) ø 2 - 6mm (Total 115 pcs; Shri ...

Category: 1200 machines and plants for process engineering / Filters
Latest update: 12.02.2024 add to watchlist
approved
dealer
item-No.: 161693232
New in: 2002

used

check Seller: UIDL Parts GmbH
Location: Land-at
Price: 1.000 € add to watchlist

Used chamber filter press equipped for 10 filter plates & 10 filter cloths, pressure switch, pressure gauge, stainless steel cake tray, stainless steel piping, expansion tank, check valve, etc.

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162166423
New in: 2004

used

check Seller: Marcels Maschinen AG Schweiz
Location: Schweiz Land-ch

add to watchlist

Control: Manufacture: Fanuc type: Quick Turn mm turning dia. over bed: 400 mm centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 230 mm turning dia. in gap: 460 mm spindle bore: 60 mm spindle taper:: DIN 55027 / Gr.6 spindle turning speed - stepless: 1-3000 U/min tailstock quill taper MT: 4 diameter of quill: 60 mm quill stroke: 120 mm total power requirement: 11 kW weight of the machine ca.: 1.6 t dimensions of the machine ca.: 275 x 140 x 155 cm x cm x cm Quick-change toolholder: Multifix B Number of toolholders: 6 3-jaw chuck: diameter: 200 mm Collet chuck: F48 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 305 peripheral equipment (e.g. heating,cooling,drying)
Latest update: 27.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 163666462
New in: 2010

used

check Seller: 01machinery s.r.l.
Location: Land-it

add to watchlist

Description Counting scale Kern max load 6 Kg minimum load 100 mg power supply: 12 V (with 220/12 V power supply)

Category: 103 milling machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162817294

used

Location: Land-de
Price: 35 € add to watchlist

Flat belt pulley, toothed pulley, multi-belt pulley, Toothed Pulley -Toothed disk: from a Kern CD 480 lathe -Type: P60-5M -Mount: hollow shaft Ø 25 mm -Dimensions: Ø 103 x 77 mm -Weight: 2.9 kg

Category: 1107 other energy machinery
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162817295

used

Location: Land-de
Price: 270 € add to watchlist

Absolute rotary encoders, encoders, rotary encoders, encoders, incremental encoders -Manufacturer: Balluff, Incremental Encoder from Lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// -Price: complete -Dimension: 100/90/80 mm -Weight: 4,3 kg

Category: 1107 other energy machinery
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162817296

used

Location: Land-de
Price: 250 € add to watchlist

Absolute rotary encoders, encoders, rotary encoders, encoders, incremental encoders -Manufacturer: Balluff, Incremental Encoder from Lathe Kern CD 480 -Type: BDG 6360-0-05-W031-2500-65// -Dimension: 100/90/80 mm -Weight: 0.5 kg

Category: 702 breadmaking and confectionery machines
Latest update: 10.01.2024 add to watchlist
approved
dealer
item-No.: 163120660

used

check Seller: Michael Spreng Bäckermeister
Location: 72555 Metzingen Land-de
Price: 750 € add to watchlist

Kern scale, up to 50 kg d=5 gr. 12V500mA with wheeled trolley with storage option Scales 50x40 cm Table 66 cm wide, 80 cm long, 50 cm high. 3 Slide-in Scales complete height 1.30 m

Category: 101 boring mills and machining centers
Latest update: 29.03.2024 add to watchlist
item-No.: 163459735
New in: 2008

used

Seller: Exapro
Location: Land-ch
Price: 236.000 € add to watchlist

Year of manufacture: 2008 - Working range X 300, Y 280, Z 250 mm - Feed speed 0.01 - 16,000 mm/min - Acceleration 8 m/s2 Resolution: 0.1 μm Position spread Ps: ±0.5 μm CNC precision dividing head (4th and 5th axis) - System 3R Macro Chuck - Brushless servo drive, fully digital - Feed speed C/B 7000 / 3000 °/min - Swivelling range B from -10 to +120 degrees a - Heidenhain iTNC 530 smarT.NC - High-frequency spindle HSK E25 500 -50,000 rpm - Tool changer 95-fold - prepared for external workpiece changer - Minimal quantity lubrication - Extraction system - CO2 extinguishing system - Laser for tool measurement (Blum) - Infrared 3D probe - External recooler - External spindle cooling unit - External coolant unit with cooling - Vorma machine light Accessories - Shrinking device Haimer Power Clamp Nano - HSK E25 holders (KERN) ø 2 - 6mm (Total 115 pcs; shrinkin ...

Category: 705 pharmaceuticals and cosmetics machines
Latest update: 29.03.2024 add to watchlist
item-No.: 163460559
New in: 2018

used

Seller: Exapro
Location: Land-it
Price: 4.000 € add to watchlist

TECAN INFINITE F50 https://lifesciences.tecan/products/microplate_readers/infinite_f50 KERN ABT-100 5M SCALE https://www.kern-sohn/shop/it/prodotti/laboratory-scales/ABT-100-5NM/ Keithley 2110 5 ½ MULTIMETER https://www.tek/en/datasheet/broad-purpose-digital-multimeters/model-2 110-5-1-2-digit-dual-display-digital-multimeter LLG Vortex UnitEXER https://shop.llg-labware/info894vortexer-llg-unitexer-with-universal_l ang_uk.htm?UID=550065a79a0d000000000000

Category: 102 lathes / CNC Cycle Turning Machines
Latest update: 28.02.2024 add to watchlist
approved
dealer
item-No.: 163466365
New in: 2003

used

check Seller: Ruppert Werkzeugmaschinen GmbH & Co.KG
Location: Land-de

add to watchlist

Key data: 650 mm, 3000 mm

Kern CD 650 DMT / Cycle Lathe Year of construction 2008, Control Siemens 840 D, Travel X/Z 450/3,000 mm, Tool carrier Multifix, Turning length 3,000 mm, Spindle bore 103 mm, Three-jaw lining, Tailstock Conveyor coolant system, Connected load 48 KW,

Category: 402 packing machines
Latest update: 29.03.2024 add to watchlist
item-No.: 163514180
New in: 2007

used

Seller: Exapro
Location: Land-ru
Price: 40.000 € add to watchlist

Enveloping line KERN K40-15 is designed for film packaging of magazines, books and other similar printed products. The K40-15 is an extremely flexible system that can be easily and quickly set up to work with products of the required format. The system is able to work with great efficiency. The maximum capacity of the line is 15,000 pieces per hour. Design. The line has a modular design, including: - continuous log loader (ASH module); - main feeder (SHTH); - main conveyor (modules FM2 and FMB); - FPO cover opening (lifting) module; - two additional attached feeders RS341; - film insertion module K40-15; - culling module; - product flip module; - label sticker module; - stacker; - output conveyor

Category: 2500 miscellaneous
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163535308

used

check Seller: Surplex GmbH
Location: Nürnberg Land-de
Price: used machinery auction RESALE 60 € add to watchlist

Description: Readability 50 g, weighing range 60 kg, reproducibility 50 g, linearity 100 g, support surface 300 x 300 mm Approx. Onsite Dimension. (l x w x h): 310 x 300 x 55 mm, weight approx.: 5 kg

Category: 1012 accessories
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163541516
New in: 2012

used

check Seller: Surplex GmbH
Location: Ettlingen Land-de
Price: used machinery auction RESALE 280 € add to watchlist

Description: Max. load capacity 5000 kg Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 30 kg

Category: 1012 accessories
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163541517
New in: 2017

used

check Seller: Surplex GmbH
Location: Ettlingen Land-de
Price: used machinery auction RESALE 280 € add to watchlist

Description: Load capacity max. 3000 kg Approx. Onsite Dimension. (l x w x h): 600 x 400 x 400 mm, weight approx.: 30 kg

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163623158
New in: 2017

used

check Seller: Christoph Busch GmbH
Location: Land-de

add to watchlist

serial number: WF17017379 : 10000 kg volt: 12 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
KERN 3rd category level
  • KERN cnc cycle turning machines (1)
  • KERN cnc milling machines (1)
  • KERN cnc tool-milling machines (1)
  • KERN cnc turning machines (1)
  • KERN numerically controlled machining centres (1)
 
RESALE used machinery 25 years online