used KALTENCHBA Fully Automatic Circular Saws

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Fully automatic circular saw with miter cut - up to 300 sawing programs - single stroke 1,000 mm, repeatable as desired - Saw blade: HSS 370 x 32 x 3 mm - Blade speed: 5 - 150 1/min - Vice opening 190 mm

The ELUMATEC SA 142/36 automatic aluminium cutting saw was manufactured in 2001 by the German brand ELUMATEC. The machine can be used for cutting aluminum profiles and PVC joinery. So far, it has only been used for cutting aluminium profiles. - Surface-specific material feeding (cyclic) via profile lifting system on one level - Single, double or triple feeding via selector switch - Safe material feeding thanks to two horizontal pressure cylinders Cvmmdigqg2 - Large cutting surface for wide profiles Technical parameters of the ELUMATEC SA 142/36 aluminium cutting saw: - saw speed: 2800 rpm. - cutting angle: 90 degrees to 45 degrees at SA 142/36 - cutting angle: 90 degrees at SA 142/36 - power output: 4000 W - Cutting unit feed: adjustable gradually - feed length/stroke : 5 to 730 mm - material transport: transport in step steps, pneumatic - air consumption without sprink ...

Separating hunters circular saws - machine with workpiece feed device. Machine is fully functional. Saw blade diameter 360 mm Workpiece dimensions 200 x 90 mm flat material Cutting speed 3000 rpm. Voltage: 3 x 380 V 50 Hz Control voltage: 220 V Performance: 11 15 a Machine number: 606 Wiring diagram number: 23.04.052

Overhaul year 2018 Year of manufacture 2010 Saw blades carbide 500 mm Saw motor power 7,5 KW Speed saw motor 2000-38000 min-1 Cutting speed blade 3100-6000 mm / min Saw blade feed adjustable 0-40 mm / s Working range 90 ° Max: 460 x 50 mm Supply length Pneumatic: Single stroke: Max 300 mm Servo controlled: Single stroke: Max 300 mm Multiple Hub: maximum 9999 mm Nachschubgeschw. Servo-controlled replenishment unit 300 mm / s Compressed air connection of be 6 bar Gewicht(Saege)CA.: 1000 kg Dimensions LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) approx.: 900 mm x600mm x800mm Technical description Pressta Eisele Profilma 540 retrofit Pressta Eisele Profilma 540 retrofit Fully automatic high-speed sawing machine for non-ferrous metals and plastics The machine is both technically and optically after completed retrofit in mint condition. Th ...

Drill grinding machine drill Grinding drillautomaticallys automatically in one clamping. maximum drill diameter 60mm (probably 80mm) Also suitable for drills with three or four cutting edges. Ready for immediate use. Simon SP50 SP80 Special price

Max sheet size 1300 x 1100 mm min. Sheet size 350 x 350 mm Precision +-1.5 mm Speed 6,000 sheets / hour Power 12 kW Length 12,5 m Weight 6.8 t

Sleeve label machine for can.

Neri BLB 400 V2T self-adhesive labeller for applying labels to the top and underside of cartons with 2 label dispensers. Carton size range: min. 20 x 15 x 70 mm, max. 180 x 120 x 200 mm. Label roll diameter max 400 mm, label roll core 40 mm. Siemens SIMATIC S7-300 PLC controller with Siemens Touch Panel Electrics 400 V/ 50 Hz, max. draw 4 KW, compressed air 6 bar Infeed height 820 bis 950 mm Machine dimensions approx. 2500 x 2000 x 2250 mm (LxWxH), weight approx. 1000 Kg, Output up to 200 cartons per minute (2 machines available)

Graham labeler COUV 128-40 with tripod, Y.O.M. 2001

KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.

Libra / labeler Bizerba GV 7000, built 1999, in a very good used and functional condition. Fully automatic scale with labeler / price printer, programable, feed and feed belt. Dimensions W/D/H 260/65/170 cm. Operating voltage 230 volts, compressed air connection 6 bar required. Workshop-tested, ready for immediate use. More on request.

E.C.H WILL ROTEX – TRI Year: 1987. One real stand. Diameter 1.2 max width 96 cm 4 hole perforation Print 2/2 Cross cutter 2 cover feeder Counting and collecting, Stitching unit Folder, Square back press. Long side cutting/short side cutting Speed: 400 m/ min Max 60 stroke/ min Cross Cuter: 300 mm, 355 mm, 420 mm and 455 mm From spare parts have gears for sheet count, knifes, stitching heads, printing cilindars.

Thermal CTP VLF AGFA AGFA Avalon VLF 70 xxt Elite year 2007 with AGFA Printdrive Price: on request

ID TR235 Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897 Max working width: 120 mm roll width 80 mm Electric connection: 230 V, 50 Hz, 500 W Own weight: 50 kg Total dimension L 1000 mm x W 800 mm x H 1900 mm Description Including mobile frame, documentation available Working speed 30m per minute Saves in the software the models of over 100 labels It has both configurations on the left LH and on the right Rh, at the customer's option Luminous LCD display (the display changes colour depending on normal mode, warnings, and faults). The control panel is 90 ° rotatable Label counting system Check the labels and any label slips on the roll The label glueing system can be set as fixed or as variable with Tacho The controls are fully integrated into the machine For the Romanian companies, there is the possibility of sell ...

2 Thermal VLF Systems: 1 x AGFA Avalon VLF A xxt year : 2006 5000 paltes with new Laserhead AGFA VLF Platemanager with AGFA Elantrix 150 Onlineprocessorwit transit table to the oven. with Haase oven OG15FU with transit table to gum unit withGum unit RSH with explanation table Price: on request 1x AGFA Avalon VLF A xxt year : 2006 Price: on request

Labeler / Labeling Machine Wet glue labelling machine Langguth E 32 / R-315 Container size 2 - 30 l Year of construction 2008 incl. glue pump swing magazine with single-stroke and handle guide very good ready-to-use condition, directly from production!!!

2 Thermal VLF Systems form one place: 1. CTP machine Lotem XL 60/80 Creo, YOC 2001 similar to Creo Kodak Trendsetter VLF format 150cm x 200cm in production The imagesetter is equipped as follows: imagesetter, plate machine, plate stacker max.format 152.4 x 203.2, 0.3-0.4 thickness the smallest format is 45.7 x 38.1 The software is equipped as follows: 1 x Lotem XL 60/80 Brisque 4 Impose 1 x Solder 800V transformer 1 x Brisque Back & Front 1 x Lotem XL Singel cassette 1 x Brisque to Improof 1 x Brisque export PS b/w option 1 x EV 800 LVD w/ 8x36GB 1 x Solder XL Wide Conveyor 2. CTP machine Lotem XL 60/80 Creo, YOC 2000 similar to Creo Kodak Trendsetter VLF format 150cm x 200cm in production The imagesetter is equipped as follows: imagesetter, plate machine, plate stacker max.format 152.4 x 203.2, 0.3-0.4 thickness, the smallest format i ...

Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape

MOSCA RO-TR-P-5 Strapping Machine A fully automatic MOSCA strapping machine type RO-TR-P-5. The machine is in very good condition. The * original price was about 18,500 € Technical details: Heating wedge welding system with electronic heating regulation Fully automatic belt threading Drive of the unit in DC technology with wear-free direct drives Tape End Query with Tape Jam Throw Automatic belt ring ejection in case of incorrect triggering Belt coil quick-change system Wear-free, force-controlled belt guidance Integration into any processing line possible Hinged transport systems with frequency control PLC control Control panel for setting the operating modes, switching distances, strip tension Potential-free contacts to upstream and downstream systems Automatic PP straps width 5,6,7,8,9 or 12mm Data sheet & machine map under these links

saw band size 3180x25x0.9 mm; machine equipped with Band Dynamometric Tension adjustment; 2x hydraulic/manual material clamp; equipped with freestanding galvanized steel height-adjustable drain roller conveyor size 3030x460x970 mm; coolant liquid pump; capacity around 240 mm; rectangle capacity 240x300 mm; fully automatic 0° to 45° / semi-automatic 0° to 60°; control panel; equipped with forklift fork slots; including various accessories on the table including 10x new saw blades; without table;

Labeller Manufacturer NERI Type BL 400 VTE Series No.M.BAA 137.01 Year of construction 2008 Labeller for boxes max. 400 pieces/min. Box dimensions Length 20- 180 mm x Height 15-120 mm x Width 70-200 mm 2 pages Labelling of Tamper Evident labels horizontal Label roll min. 40 mm max. 400 mm. Incorrect cardboard ejection

Labeller Manufacturer NERI Type BL 400 VTEXL Series No. N 3110018 Year of construction 2011 Labeller for boxes max. 400 pieces/min. Box dimensions length 20- 180 mm x height 15-120 mm x width 70-200 mm 2 pages labelling of Tamper Evident labels horizontal 1 labeller vertical for vignettes Label roll min. 40 mm max. 400 mm. Serialization Make Mettler Toledo YOC 2019 Printer Make Cloud M 610 Incorrect cardboard ejection

Labeller Manufacturer NERI Type BL 400 VTEXL Series No. N 3110017 Year of construction 2011 Labeller for boxes max. 400 pieces/min. Box dimensions length 20- 180 mm x height 15-120 mm x width 70-200 mm 2 pages labelling of Tamper Evident labels horizontal 1 labeller vertical for vignettes Label roll min. 40 mm max. 400 mm. Serialization Make Systech (Product Tracking) Printer Brand Cloud M 600 Incorrect cardboard ejection

Labelling machine Manufacturer SES Type SES-107 TTF Year of manufacture 2003 2-sided carton labeling machine including thermal transfer printer (1x top, 1x side) 2x SES 107TTF installed on the left side label width 116 mm min. label width Label width 25 mm min. label height Label height 15 mm Print width 106.6 mm, max. print height 1,500 mm Print speed 300 mm/sec, labelling speed 0-18 m/min