Category: 302 extruders / Coextrusion plants
Latest update: 19.02.2024 add to watchlist
approved
dealer
item-No.: 146688264
New in: 2006

used

check Seller: ANT Maschinenhandel UG
Location: 10707 Berlin Land-de

add to watchlist

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

Category: 308 other machines for plastic
Latest update: 28.12.2023 add to watchlist
approved
dealer
item-No.: 161409475
New in: 1997

used

check Seller: Remax Kunststofftechnik
Location: 71272 Renningen Land-de

add to watchlist

See PDF attached

Category: 302 extruders / Extruders
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 161714491
New in: 1988

used

check Seller: Formplast GmbH
Location: 45527 Hattingen Land-de

add to watchlist

Ref. no.: 18235 Hersteller: KUHNE Year of construction: 1988 Extruder Screw diameter: 60 mm

Category: 302 extruders / Extruding lines for LDPE blow-extrusion films
Latest update: 25.10.2023 add to watchlist
ankerimg
item-No.: 162689008
New in: 1989

used

Seller: Auch Folien + Technik e. Kfm
Location: Land-de

add to watchlist

Unrenovated blown film line directly from production, make extruder Alpine HS 75 L/D 24, with 4 volumetric dosing stations, die head tool type BK 14-36 IBC, cooling ring HK 300 with peak, capacity up to 175 kg/h, film thicknesses variable depending on polymer, for HD-PE 12 ym – 50 my, corona treatment, film slitting knife, thickness measurement, film flattening, film widths 840 – 1,200 mm, tandem winder made by Kuhne, the technical equipment has improved over the years. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Category: 302 extruders
Latest update: 01.03.2024 add to watchlist
approved
dealer
item-No.: 163104519
New in: 1999

used

check Seller: MJS-LINE GmbH
Location: Land-ch

add to watchlist

KUHNE EXTRUDER KF70E & CO. EXTRUDER K45-24D Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Foil nozzle // Max. film width 700-800 mm Fully existing infrastructure; control cabinets, pumps, etc. Material PS and PP were processed

Category: 302 extruders / Single screw-type extruding machine
Latest update: 06.03.2024 add to watchlist
approved
dealer
item-No.: 163519899
New in: 1988

used

check Seller: pmh gmbh
Location: Land-de
Price: 3.000 € add to watchlist

Key data: 37 mm, 24 , 13 U/min

Used Kühne Extruder Year of construction :1988 Extruder is functional. Gearbox slightly leaking.

Category: 307 rubber machines
Latest update: 23.06.2016 add to watchlist
approved
dealer
item-No.: 297683
New in: 1990

used

check Seller: Euro Rubber Lines
Location: uk Land-uk

add to watchlist

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Category: 307 rubber machines
Latest update: 23.06.2016 add to watchlist
approved
dealer
item-No.: 10621565

used

check Seller: Euro Rubber Lines
Location: Land-uk

add to watchlist

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

Category: 307 rubber machines / Rubber extruders
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 16174530
New in: 1980

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

Barwell C3 Preformer Extruder 2500 psi Output 600kg/hour Ram type Extruder Extruder size 250mm With Rotary Cutter 8 fixed speeds Year 1980

Category: 302 extruders / Extruders
Latest update: 21.11.2023 add to watchlist
approved
dealer
item-No.: 112597719
New in: 1978

used

check Seller: K & K Industrievertretungen GmbH
Location: Hannover Land-de

add to watchlist

Manufacturer: Paul Troester Maschinenfabrik/Hannover Year of construction: 1978, machine was in operation until the end of 2015 Screw diameter: 150 mm Length: 16 D (approx. 2,400 mm) Screw speed: 2.5-25 / 4 - 40 U/Min. Centre height of the extruder: 1,100 mm Type of gearbox 3 TH 990 K / 2s, 2 speeds. Gear ratio: = i1 16.5: 1 i2 = 26.4: 1 Maximum gearbox output torque: 45,000 nm Maximum permissible injection pressure: 350 bar without limitation through the extrusion head. The extruder will be overhauled and designed/changed according to customer's specification. Below pictures 1-4 show an extruder overhauled by us.

Category: 302 extruders / Extruders
Latest update: 23.06.2016 add to watchlist
approved
dealer
item-No.: 14001000
New in: 1995

used

check Seller: Euro Rubber Lines
Location: Land-uk

add to watchlist

1 x Buss PR200? Ko-Kneader, supplied fully refurbished by Buss in 1995, G130 gearbox, 11 L/D ratio, with 340kW dc motor and controls. Including oil heater and TCU 2t/hr output. Spare screw and barrel segments.

Category: 302 extruders / Extruders
Latest update: 28.12.2023 add to watchlist
approved
dealer
item-No.: 27420950
New in: 1989

used

check Seller: Remax Kunststofftechnik
Location: Renningen Land-de

add to watchlist

According to the description below

Category: 307 rubber machines / Rubber extruders
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 123726245

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

8" Cold Feed Rubber Extruder

Category: 302 extruders
Latest update: 19.09.2023 add to watchlist
approved
dealer
item-No.: 133941356
New in: 2020

new

check Seller: PLASTICO TRADING GmbH & Co.KG
Location: Land-de

add to watchlist

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

Category: 307 rubber machines / Rubber extruders
Latest update: 23.06.2016 add to watchlist
approved
dealer
ankerimg
item-No.: 14001070
New in: 1988

used

check Seller: Euro Rubber Lines
Location: Land-uk

add to watchlist

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

Category: 302 extruders / Extruders
Latest update: 19.09.2023 add to watchlist
approved
dealer
item-No.: 160717824

used

check Seller: PLASTICO TRADING GmbH & Co.KG
Location: Land-de

add to watchlist

Key data: 100 , 140

Stock No.2452 1 used, partially overhauled and functionally tested pelletizing line Throughput up to 500 kg/h depending on the material, consisting of: Tamping unit Kreyenborg SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm.-1 screw depth 14 mm Heating capacity approx. 35 kW installed 1x athm. Degassing zone Screen-pack-changer Double piston Kreyenborg K-SWE 160 RS back-flush self-cleaning with screen surface 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. Hydraulic station Granulator with drive 4 kW Water pump 2.2 kW By-pass system, water tank with heating 9 kW installed and heat exchanger BKG granulate centrifuge TWE 300 with drive 3 kW pellet classifier table Control board and Siemens material feed conveying, big-bag filling station  ...

Category: 307 rubber machines / Rubber extruders
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 16174529
New in: 1994

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

Category: 302 extruders / Extruders
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 145047636
New in: 2010

used

check Seller: PLAMA Engineering GmbH
Location: Land-de

add to watchlist

Material: PE, PP, PS, ABS / Details: DC motor 220 kW, degassing, dcrunner, screw diameter 70 mm, LD: 32, Throughput: approx. 400 - 600 KG/hr.

Category: 302 extruders / Extruders
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 161297146
New in: 2011

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 21.405 € add to watchlist

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

Category: 302 extruders / Extruders
Latest update: 21.03.2024 add to watchlist
approved
dealer
item-No.: 162884701
New in: 2011

used

check Seller: Industrio Service Piotr Pruski
Location: Land-pl
VS

add to watchlist

Used twin-screw, parallel, counter-rotating extruder by Amut model BA92 NOMAX. New 2011. Output: 270 - 370 kg/h Hours of operation: 53638 h Other details: - Diameter of augers 92 mm - L/D ratio 28:1 - Drive power 60 kW (400V, 50 Hz, 3 ph) AC - Two sets of screws -for ABS processing -for PVC processing - Number of cylinder heating zones 7 - Number of cylinder cooling zones (air) 4 - Number of heating zones for head and adaptor 5 + 1 - Built-in pressure and temperature measurement system for plastic mass - Thermal oil unit for thermostating the worms for PVC - Drive power of vacuum degassing pump 11 kW - Drive power of screw feeder 1.5 kW - Without control (subassemblies available according to the list)

Category: 302 extruders / Extruders
Latest update: 06.07.2023 add to watchlist
approved
dealer
item-No.: 132706022
New in: 1988

used

check Seller:
Location: 42327 Wuppertal Land-de

add to watchlist

New and unused machine Berstorff twin screw extruder ZE 130A Extruder screws: 2x140 mm L/D 30:1 Built: 1988 (unused) Drive: DC motor - 250 kW Screw rotations: 300 rpm Extruder heating: 70 kW 2x Degassing complete screw in original packaging 2 machines available Location Germany, Wuppertal Visit possible, appointment by appointment

Category: 302 extruders
Latest update: 27.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 163666381
New in: 1998

used

check Seller: 01machinery s.r.l.
Location: Land-it

add to watchlist

Description Single Screw Extruder Screw diamter 60 L/D 25 Motor power 27,5 k

Category: 302 extruders / Extruders
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 149083777

used

check Seller: OLLER-TRADE
Location: Land-pl
Price: 41.000 € add to watchlist

Strainer Bandera 150mm with 75kW motor. This machine has been overhauled by Deguma and little used after that. More info as attachment.

Category: 307 rubber machines / Rubber extruders
Latest update: 25.09.2023 add to watchlist
approved
dealer
item-No.: 150671556
New in: 1987

used

check Seller: Pelmar Engineering Germany GmbH
Location: 63457 Hanau Land-de

add to watchlist

available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!

Category: 302 extruders
Latest update: 27.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 163666382
New in: 2002

used

check Seller: 01machinery s.r.l.
Location: Land-it

add to watchlist

Description Conical Twin Screw Extruder Screws Diameter 45 - 97 Screws Length 390 Barrel zones 3 Nr.1 vent Thermoregulated screws Motor power 15,4 kW Forced feed

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
KUHNE 3rd category level
  • KUHNE coextrusion plants (1)
  • KUHNE extruders (1)
  • KUHNE single screw-type extruding machine (1)
 
RESALE used machinery 25 years online