We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Heated surfacefinishing machine for Zink-magnesium coating Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg
used
Footprint: 1950x400x760 mm Power: 1.5 kW Weight: 436 kg Dimensions: 1950 x 900 x 1700 mm
used
General: Year of construction 2005 Power 0.5 kW
used
General: Year of construction 2011 Power 1.0 kW Weight 240 kg
used
for fine grinding, lapping and polishing General: Year of construction: 2009 Working range Ø 300 mm Basin size Ø 400 mm Tool holder M27 Dimensions: 640 x 800 x 950 mm Weight approx. 200 kg
used
Glatt LR 350 mobile elevating and tipping device for drums and containers etc, max weight load 350kg, fork length approx. 750mm, fork diameter approx. 73mm, approx 910mm gap, max. lift height approx. 1450mm from the floor.
used
VINCA TO300-INOX stainless steel mobile lifting and tipping device for drums, barrels etc., maximum lift 160kg, maximum lift height 1636 mm. Year 2011 (2 available)
used
Drive and deflection drums in different diameters and lengths
used
well-preserved, stable cutting drums Stadler.
used
Sweco Taumel sieve ø 1200 mm different screens available.
used
Stock# U2308-7 Used stainless steel contact parts polish made V type tumbling blender with total volume 4500 l. Working volume 3000 l. Mixer has two inspection/feeding inlets with bolted lids, each with diameter 450 mm. Central conical discharge with diameter 245 mm, with manually operated valve. There is an internal supporting shaft/baffle inside the mixing chamber. Machine is driven by el. motor 18.5 kW, 1480 rpm, 380 V, 50 hz, through belts and gearbox type WD650. Working rotation of mixing chamber up to 8 rpm. Supporting frames and operating platform designed in carbon steel. Includes technical documentation.
used
Tumbler rivet head BODMER KÜSNACHT Type FMK 3 Year of construction approx. 1980 Rivet shank diameter: max. 10 mm Tool diameter: 12 mm Riveting head stroke: 40 mm Riveting spindle speed: approx. 1400 rpm. Motor power: 0.37 kW Mains connection: 380 volts, 50 Hz - Rivet pressure adjustment via hydraulic pressure infinitely variable - Micrometer stop for stroke limitation - Stroke movement via oil hydraulics (max. 45 bar) - Machined flange surface 115 mm with mounting nut on housing Total length: approx. 800 mm Weight: approx. 40 kg good condition The rivet head has a multi-spindle head to set 2 or 3 rivets at the same time. However, this can be dismantled and used normally again. For normal use, however, the normal tumbling head which holds the tool is missing.; used
used
Tumbler rivet head BODMER KÜSNACHT Type FMK 3 Year of construction approx. 1980 Rivet shank diameter: max. 10 mm Tool diameter: 12 mm Riveting head stroke: 40 mm Riveting spindle speed: approx. 1400 rpm. Motor power: 0.37 kW Mains connection: 380 volts, 50 Hz - Rivet pressure adjustment via hydraulic pressure infinitely variable - Micrometer stop for stroke limitation - Stroke movement via oil hydraulics (max. 45 bar) - Machined flange surface 115 mm with mounting nut on housing Total length: approx. 800 mm Weight: approx. 40 kg good condition The rivet head has a multi-spindle head to set 2 or 3 rivets at the same time. However, this can be dismantled and used normally again. For normal use, however, the normal tumbling head which holds the tool is missing.; used
used
Tumbling riveting machine - radial spot riveting machine KUMAG Masch. No. 67/101 Year of construction 1967 Table size 330 x 280 mm Projection 215 mm Tool shank cone 8 - 10 mm Rivet shank diameter 1 - 10 mm Tool stroke 30 - 40 mm Operating air pressure 1 - 6 bar Rivet time adjustable 0.5 sec. - 3 h motor power 0.8 kW Mains connection 380 volts, 50 Hz - Conical tool shank for quick tool change - Rivet head on the column adjustable in height- Fine adjustment of the working stroke, max. 10 mm, with scale ring - Riveting force air pressure infinitely adjustable - Triggering via push-button table model Space requirement L x W x H 670 x 450 x 850 mm Weight 215 kg good condition; used
used
NEUMASCHINE - Double-sided belt grinding or polishing machine, different Configurations possible - grinding / grinding grinding polishing polishing motor 4 kW, polishing disc max. 120 x 500 mm, max. diameter contact disc 400 mm, grinding belt 50 x 3500 mm; NEW MACHINE
used
Ceramic and plastic grinding coerper, fine grinder, polishing coerper, polishing balls, tristar, triangle, cylinder, trident, elipse pyramid, cone... Further information in the pdf file price on request; New + unused
used
Double-sided grinding and polishing block MEYER type SMP Masch. No. 848 Year of construction 1963 Shaft diameter 50 mm Grinding wheel holder 305 mm Wheel spacing 1470 mm Grinding and polishing wheel diameter max. 800 mm Working height 550 mm Speed 710 / 800 / 950 rpm. Drive power 2x 3 kW mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately- star-delta switch for each drive motor separately - speed change over flipping the drive belt - dust extraction flange 100 mm- mounted are 2 pieces corundum grinding wheels with 40 mm width, approx. 560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg good condition; used
used
Grinding and polishing machine for the shoemaker's profession, cleaned and tested.
used
Fuse for recirculation: 2.5A, with grinding discs.
used
Connected load: 26kVA, weight: 3.5t.
used
Description: Machine number: 2414/63 Speed: 1700/2200 rpm Operating voltage: 380/650 V Rated current: 8.9 A Speed: 1420 rpm Approx. Onsite Dimension. (l x w x h): 1,300 x 700 x 2,000 mm, weight approx.: 150 kg
used
Description: 2800 rpm, with base frame Approx. Onsite Dimension. (l x w x h): 400 x 200 x 1,500 mm, weight approx.: 20 kg
used
Ceramic and plastic vibratory grinding and polishing chips / porcelain chips balls, triangle, tristar, cylinder, elipse, pyramid, cone... sizes and prices on request
used
NEUMASCHINE - Double-sided belt grinding and polishing buck, under- Configurations are possible - grinding / grinding grinding polishing polishing motor 4, 5.5 or 7.5 kW, polishing disc max. 120 x 500 mm, max. Contact disc 400 mm, grinding belt 50 x 3500 mm, - 3 different Speeds can be used: 700, 800, 900, 1000, 1120, 1250, 1400, 1600, 1800, 2000, 2240, 2500, or 2800 rpm-1; NEW MACHINE
new
FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser ...