used KRAUSE CTP Exposure equipment Imagesetter

System includes (1) Jet High-Performance Platesetter Krause, year of manufacture: 2007 (2) Polymer Printing Plate Processor Krause 650 Bluefin, year of construction: 2006 (3) Polymer Printing Plate Processor Krause Bluefin XS 650, year of construction: 2012 (4) Platesetter Krause LS-PERFOMANCE CTP, year of construction: 2006 (5) Register Punching and Folding System NELA VPC 463, year of construction: 2002 (6) Register Punching and Folding System NELA VCPeco, year of construction: 2016.

Stock press Krause; massive; Format 49x56cm; Insertion height 72cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Stock press Krause; massive; Format 49x56cm; Insertion height 72cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Stock press Krause; massive; Format 49x56cm; Insertion height 72cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Stock press Krause; massive; Format 49x56cm; Insertion height 72cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Stock press Krause; massive; Format 49x56cm; Insertion height 72cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Rotary board cutter & creaser & half cutting Krause Model J138-LV/80 Year 1980's Creasing length 1300 mm 1st "station" 6 sets of half cutting tools 2nd "station" 7 sets of creasing tools to make a W shape 3rd "station" 7 sets of circular knives Table with side alignment & with push system Speed controlled by means of a spead pulley

Double head corner cutter Krause Model Y12RM Year 1975 Knife included 7 mm upper + lower knife (other on request) Stack height 100 mm Minimum cut 65 mm between the heads Maximum cut 420 mm between the heads Speed up to 80 cycles per minute With footswitch, manual clutch release for set-up, with automatic push side lay, NEW electronic components and wires ! Available direct

Double head corner cutter Krause Model Y12RM Year 1975 Knife included 7 mm upper + lower knife (other on request) Stack height 100 mm Minimum cut 65 mm between the heads Maximum cut 420 mm between the heads Speed up to 80 cycles per minute With footswitch, manual clutch release for set-up, with automatic push side lay, NEW electronic components and wires ! Available direct

Double head corner cutter Krause Model Y12RM Year 1975 Knife included 7 mm upper + lower knife (other on request) Stack height 100 mm Minimum cut 65 mm between the heads Maximum cut 420 mm between the heads Speed up to 80 cycles per minute With footswitch, manual clutch release for set-up, with automatic push side lay, NEW electronic components and wires ! Available direct

Double head corner cutter Krause Model Y12RM Year 1975 Knife included 7 mm upper + lower knife (other on request) Stack height 100 mm Minimum cut 65 mm between the heads Maximum cut 420 mm between the heads Speed up to 80 cycles per minute With footswitch, manual clutch release for set-up, with automatic push side lay, NEW electronic components and wires ! Available direct

STANDARD-EQUIPPED

Creasing machine for board Krasue Model Creasing machine Creasing length 100 cm Creasing depth adjustable/variable Creasing span adjustable-variable Creasing thickness possible up to 4 mm board Details will be equipped with motor and start-stop circuit after order, extremely heavy duty machine, built to last for many years to come Available Direct

x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm Control: Siemens type: 840Dsl Number of spindles: 2 St. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Doppelwendespanner Maschinennummer 0552.80.00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 630 mm z-travel: 710 mm Control: Siemens type: 840Dsl Number of spindles: 2 St. turning speeds: 30-12000 U/min tool taper: HSK 63 Tool changer: 80 Pos. Feed: 1-40.000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Doppelwendespanner Maschinennummer 0552.80.00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cuts cardboard into strips of different width Table width 1300mm

pressure: 250 t distance between columns: 850 mm stroke: 500 mm dayligth: 800 mm table surface area: 800x800 mm ram surface: 800x800 mm weight of the machine ca.: 12 t dimensions of the machine ca.: BxTxH 1600x1600x3400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

M. No.: 68387 Equipment / Additional information: Cutting width: 120 cm

Description: mobile platform ladder 9-stage, brand KRAUSE, very good condition Details: Can be climbed on one side mobile with castors height adjustable 1 x 9 steps double-sided handrail with large pedestal Aluminium Width 75 cm Step height 20 cm Stand height 180 cm (retracted) extendable up to approx. 240 cm Platform length approx. 460 cm Stair length approx. 200 cm Total length approx. 660 cm Net price 1.800,00 € / Piece Net price 3.200,00 € / Pair

Impact scissors Karl Krause "ROBUST" Ma. No. : 3142 Cutting width: 112 cm Table: 72 x 114 cm 2 adjustable stops Knives sharpened Weight: 360 KG Tested and cleaned / Functional

Corner cutter Make Krause Model ECK Year 1900

Machine No.:306792 90° and 60° knives,

Masch. No.: 314277 with creasing device

Heavy Cardboard Bending Machine & Corner Protection Press Grooving machine AB: 1300 mm Groove width: 2-12 mm Additional function: Press in protective corners plus various protective corners !

2 ladders / safety ladder / post ladder – used- : Price for both ladders ex site: 695.-€ (net)! Type 1: Manufacturer: Krause Art.Nr.: 83320 Type: Stabilo platform ladder Vario 750 1x 7 steps Year of manufacture: unknown Made of aluminium Original price: approx. 1.400.-€ Type 2: Manufacturer: Zarges Other information unknown Condition: good Available: now Location: Wenkbach