used KEG Filling installations

Overview  The KEG plant was built in 1996 by the German company m+f KEG Technik. The plant is in a well maintained condition.  Technical details  Control system: Siemens S5 capacity: 100 to 140KEG/h 10l & 20l softdrink KEGs Softdrink fitting / AfG fitting (Dia. 58 mm) Scope of delivery Transport lanes Outside washer  KEG interior washing and filling machine Minomat A5/5  KEG scale  Heat exchanger

Overview The semi-automatic KEG filler was built in 2017 by the German company m+f KEG-Technik and fills 50-60 KEGs/ h into various containers. It is still in operation and can be inspected.  Technical data Capacity: 50-60 KEG/h Formats: 20l, 30l  Containers: KeyKeg, Dolium-KEG, PETainer, KEG  Filling head made of stainless steel  Pressure control by pressure switch (controls hot water and steam pressures for flushing the filling head) Sight glass for product feed line Dimensions (LxWxH): 1.150mm x 800mm x 2.150mm ±50 Control: Siemens S7  More pictures, videos and technical documentation available on request

Overview This is a complete KEG line consisting of a refurbished filler, a new transport system, and a new outside washer. With a capacity of 50 - 65 KEG/ h, 30l DIN and Euro KEGs can be processed. The plant can be delivered in approx. 8 - 9 months after receipt of order.  Technical details  Capacity: 50 - 65 KEG/h  Efficiency: 95%.  Container types: 30 l DIN and Euro-KEG  Fitting type: flat fitting type A  Supply voltage: 230/400 V, 50 Hz Control system: SIEMENS S7  Rotating and rotating device  Internal pre-cleaning station additionally purchasable  Automatic dosing device additionally purchasable  Scope of delivery Refurbished KEG interior cleaning and filling machine | M+F KEG-Technik | MINOMAT A5/5 New KEG exterior washer | M+F KEG-Technik | AW 1150-H  KEG transport system

Overview This KEG bottling plant was built by M+F KEG Technik in 2018. It is part of an entire brewery, is still in production and will soon be professionally dismantled. The machine can be viewed in person at any time.  Technical details  Last operated with 25 HL/ h (50l) or 35 HL/ h (

Jaust 60 KEG / h, 3 cleaning heads 1 filling head / 1 cleaning tank, 1 mixing tank, 1 hot water tank

2 head installation 1 cleaning head + 1 filling head

Unused Kegel flow pack packaging machine, model DXDZ 250B. New 2017. Device designed for packing various types of products into foil bags, model with upper foil feed, especially recommended for small, light products, e.g. sweets, soap, parts, etc. The device packs the product into a roll of foil, wrapping it around the product from the top and welding it longitudinally from the bottom and transversely on the sides, resulting in a bag. The device is operated via a clear, easy-to-use HMI panel. Independently adjustable longitudinal and transverse welding temperatures. A photocell enabling work with printed foil, with a marker, guaranteeing accuracy and high aesthetics of the final product. Rotating heating jaws, failure diagnosis system. Technical parameters: Voltage 220V, 50/60 Hz Motor power 2.4 kW Foil width: 30-110 mm Bag length: 65-190 mm or 120-280 mm Bag width 30-11 ...

Capacity: 30 Keg/h , Pressure: 5 bar, Formats: flat- and basket-fitting, Operation / Control: Siemens S5, Features: 2 heads (both filling and cleaning), 2 CIP- vessels , Code: 890

Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40-50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, piping ...

Description: amount 3 pieces weight approx.: 65 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm

1000 ml, 750 ml, 500 ml, 250 ml,

Cat.-No. 14-00218 PET line for still and carbonated beverages Format: 1.5 L, production capacity: 20,000 bottles / h in a very good condition Year of construction: 2001 working hours: 42.389 the plant built up yet, but is currently out of operation Machine manufacturer year details Blow moulding machine SIG BLOMAX 16 2001 including molding water inlet, elevator and hopper, cooler (Rahim) Molding m Tanner VZT 3000 dosing system 2001 air transporters 2001 buffer tank 14 m³ Alfa Laval 2001 short time pasteurisation KHS Innopro KZE 2001 330 HL / h Triblock (Rinser, filler, Capper) KHS Innoclean/Innofill 120/10 2001 volume filler Capsule conveyors with supply tank Filling height control HEUFT basic 2001 labeller KHS Anker 2001 label control HEUFT HBF 150000 ST 2001 laser encoder video Jet 3430 2001 shrink film Packer SMI SK 800 T 2001 tray Packer in 6 Pack film (50 ppm)  ...

with 30 filling valves 5stelligem natural corker 5stelligem aluminium screw capper for 28 mm standard caps Direction: left - right

Used cup filling machine Brand: Benhil Type: 8206 capacity: -. Electric: -. Dimension: -. YOM: -.

Beer Filler Krones, VP-VI 104-087 104 valves, Crown capper 18 heads, Labellers Krones Starmatic 600-158-6-130. Filler is fully electronically controlled by computer, each valve can be regulated independly. Machine has all new installed SMC electric valves – exchanged in 2016. Several pre-evacuation steps and the bottle treatment with gas from the ring ensure minimum oxygen. Sensomatic Filler can work without problem with beer directly after Flasch pasterisation, with beer temperature of 15 Celcius, or even more. Capacity: 36 000 b/h This machine worked exellentlly, especially after instalation of new SMC valves. THE PRICE APPLIES TO THE FULLY RENOVATED DEVICE. WARRANTY - 2 YEARS

Ampack KF1/3 cup filling machine. Format parts for 75 and 95 mm round Cup. filling volume 100-550 ml, filler and productfunnel CIP cleanable. equipped with H2O2 cup desinfection, Infra Red lid desinfection and HEPA overpressure system. Capacity up to ±7200 cups per hour. With cup conveyor and turntable. Built in 1995, very good condition. Machine is still in operation until end of 2017. including documentation

Long tube filler from KRONES Conti block In mint condition, overhauled in 2018 BJ. 1989 Capacity: up to 12,000 bph 0. 5l. Product: beer, Soft drinks and mineral water Bottles: Glass, 0.33; 0.5; 0.75; 1.0 L Capper: Crown Cork

Portioner/filling station in a good used and functional condition. Suitable for liquid and viscous products. Completely made of stainless steel, rollable, pneumatic contact. Dimensions W/D/H 110/110/140 cm. Operating voltage 400 volts. Workshop-tested, ready for immediate use. More on request.

ELO PAK Machine model S-PS 80HA Year: 2008 Capacity: 9,000 L / h Phase: 3 Voltage: 400 V Current: 177 A Frequency: 50 HZ Air pressure: Max.: 882 KPA Min: 588 KPA Air consump.: 1350 NL/min

Eurolux - Pressure Filler for glas bottles with 12 stations – Capacity 0,5l: to 650 bottles/h - NEW Technical data: - Capacity 0,5l: to 650 bottles/h, it is also possible for : 0,33l, 0,7l, 1,0l, 1,5l /other capacity - Installed power 0,37 kW - Weight: 240 kg - Measurement: HxWxD: 200 x 1000 x 1000 mm - With 12 stations - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A • Handling 1 Person • Operating Manual and Spare Parts List available. Video available!! All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Eurolux - Pressure Filler for PET - bottles 12 stations with dosing pump – Capacity: up to 650 bottles/h - NEW Technical data: - Capacity 0,5l; 1,0l; 1,5l : to 650 bottles/h – for PET bottles for syrup, water, drinks with / without gas - Installed power 0,37 kW - Weight: 240 kg - Measurement: H x W x D: 200 x 1150 x 1100 mm - With 12 stations - With dosing pump - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A - Handling 1 Person - semiautomatic Operating Manual and Spare Parts List available. All prices are valid Ex-Works, excl. VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

1 used filling line for ironing bottles. Original in use for filling beer (2C) in 330 ml printed glass bottles (diameter 60 mm x height 230 mm) with handle closure, with a capacity of 1,900 bottles/H. Additional format parts for 500, 750 and 1,000 ml bottles. E- connection 415V/50Hz. System has run very little and is in top condition! Consisting of: Task table, with 5 rows of stainless steel chains. Stainless steel frame, with inliner and adjustable drive. Built 2006. 1 bottle transport system for empty and full bottles. Stainless steel chain on stainless steel frame. Built 2006. 1 Rinser/Filler Monobloc, Make Cime Careddu (Italy), Type DPS 9-8, built 2006, 9-head rotating Rinser, no-bottle/no-spray, 8-head rotating back pressure filler with 2x pre-evacuation (built-in vacuum pump). Heights adjustable. Min/max bottle diameter 50 - 90 mm, min/max bottle height 180 - 350 mm. Drain CIP. Wi ...

Combibloc CFA 310 -32 Aseptic filling line, volume: 1000ml, 10000 pph 1. Filler Manufacturer :SIG Combibloc Model : CFA 310 -32 Year : 1998/2009 Output : 10.000 pph Format : Combibloc Slimline Volume : 1000ml 2. Accumulation Manufacturer : Combibloc 3. Cap applicator Manufacturer : Combibloc Model : Combitop Cap model: Combiswift 4. Cardboard packer type: Traypacker TFH year: 2001/2009

Filler/sealer Make: KHS Type: Innofill DR 132/ 24/24 Built: 1996 Power: 50000 Fl./h Filling product: ier Bottle size: 0.5 glass bottle Bottle diameter: 78mm Number of filling valves: 132 Number of locking devices: 24 SV (Alcoa), 24KK ( KHS) Running direction: Left-right Control: Siemens S5 - Fill height adjustment - Cork mill - Extended pre-table - CIP tulips currently still in operation, can be visited, available from 01.03.2020

Filler/sealer Manufacturer: KHS Type: VVF 126/14SV/14KK Built: 1981 Power: 30000- 35.000 Fl/h Number of filling valves: 126 Number of closing bodies: Show sealer (Zalkin) : 14 Crown Corker (KHS): 14 Running direction: left/right Control: S7 Bottle size: 95mm, length 240- 340mm Mandatory processing commitment only after sending all types of bottles to be driven Height adjustment: automatic Control panel on the filler Little traces of wear, as until now mainly bottled in PET bottle Outdated