We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...
used
Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...
used
Conductive force: 63 t Projection: 280 mm Table size: 500 x 600 mm Installation height: without straightening bridge 600 mm stroke: 160 mm Tappet speed upwards: 117 mm/s m/min Rotary speed downwards: 42 mm/s m/min Space requirement: 1600 x 700 x 2400 mm Weight: 3900 kg
used
– Capacity 100 tons – Cylinder stroke 400 mm – Working width 1045 mm – Table size 1010 x 1950 – Cylinder is movable - Pressure indicator - Emergency stop – 400V
used
Key data: 200 t
Horizontal Hydr. Straightening and bending press, 200to, hand and foot control, hydraulics. 18kw, with dies.
used
Horizontal Hydr. Straightening and bending press, 200to, hand and foot control, hydraulics. 18kw, with dies.
used
Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used
used
Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price
used
CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU
used
4x NUMMERATORS STRAIGHT, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA
used
1x NUMMERATORS STRAIGHT, FORWARD, BIG No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA
used
Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets
used
Construction folding machine make CIDAN type BA 200Masch. -No: 18127/02 built in 1999especially suitable for use on construction sitesin all-welded steel constructionTechnical specifications:Working length: 2050 mmMax. Sheet thickness 160 N / mm2 Titanium zinc DIN 17770: 0.8 mmStroke of the upper beam: 75 mmBending beam thickness: 15 mmOutside dimensions approx: 2350 x 275 x 1100 mmWeight approx: 160 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Manual swivel bending machine make HERA type U IIIYear of construction 1974Technical specifications:Bending length: 1540 mmgreatest sheet thickness at 40 kg: 4.0 mmSmallest shelf height with the greatest sheet thickness: 20 mmOpening width of the upper beam: 350 mmAdjustability of the lower and bending beam: 125 mmlargest diameter when rounding: 250 mmExternal dimensions approx .: 2500 x 1000 x 2000 mmWeight approx: 1000 kgWith- counterweight- Hand wheel for height adjustment of the upper beamused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Brand: Bavelloni Type: Straight Line Edging Machine Model: CR 1111 Serial Number: 443041 Construction year: 1988, overhauled 2023 Air pressure 8 bar Weight: 3,5 tons Length mm: 8100 Width mm: 1500 Height mm: 3300 incl. rack increase Transport size L x W x H: 4,5 x 2,49 x 2,4 mtr Min,- max. glass thickness Min. 3 mm, max. 31 mm Min.-max glass size: min. 70 x 70 mm Max. 200 kg/ p.mtr Working speed: 0- 5 mtr/ p.min Electr. Connection: 23,8 Kw Missing parts: None, complete Documentation: Yes, NL Instruction: Yes, NL Electric scheme: Yes Parts list: Yes Number of spindles: 11 spindles Condition machine : Complete overhauled/ modernized Remaining: Complete set of wheels
used
Offer via gebr. Suhner straight grinder type USC 9-R You can easily use the SUHNER USC 9-R straight grinder on high or low speed. It is suitable for almost all applications with infinitely variable speed control. The fields of application include fine milling and grinding work. Specifics * Work in the high and low touring area * Continuous speed regulation 4000 - 9000 rpm. * 500 watts * Electrical soft start
used
max. wheel diameter: 180 mm gear width: 60 mm max. module: 8 / 10 min. module: 1,5 tooth length: max. 16 mm no. of teeth: Segment 6 no. of teeth: Vollrundung 6-30 pivoting angle: 0 - 10 ° inserted tooth milling cutter dia.: 600 mm cutting speed: Frässpindel 48-78 m/min root circle dia. min.: 50 mm electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 16 kW weight of the machine ca.: 7,6 t Segmental Gear Generating Machine - specifically for rational production of tapered or cylindrical segmental gears, such as steering sector shafts. This model also operates to the generating-indexing method and permits tooth thickness modifications on the centre Tooth. with chip conveyor and handbooks ex works South Americ The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Pressure total: 80 ton Stroke: 110 mm Daylight: 450 mm Table surface area : 650 x 520 mm Slide area: 560 x 480 mm Die cushion capacity in table: 20 ton Required power: 18,5 kW Dimensions L x W x H: 2000 x 1200 x 3000 mm Weight of machine approx.: 4,8 ton
used
Pressure total: 700 ton Stroke: 600 mm Daylight: 1000 mm Table surface area : 3000 x 1200 mm Slide area: 3000 x 1200 mm Approach speed: 150 mm / sec Working speed: 1 - 10 mm / sec Return speed: 150 mm / sec Die weight at the ram max.: 4000 kg Required power: 65 kW Weight of machine approx.: 62 ton
used
Pressure total: 300 ton Stroke: 700 mm Daylight: 1000 mm Table surface area : 2000 x 1000 mm Slide area: 2000 x 1000 mm Weight of machine approx.: 20 ton
used
Pressure total: 280 ton Stroke: 800 mm Daylight: 1.600 mm Table surface area : 2.000 x 1.200 mm Slide area: 2.000 x 1.200 mm Die cushion capacity in table: 65 ton Die cushion stroke: 350 mm Die cushion pad area: 1.705 x 920 mm Approach speed: 15 m / min Working speed: 0,8 - 2,4 m / min Return speed: 8,5 m / min Required power: 2 x 37 kW Height over floor approx.: 4.850 mm Weight of machine approx.: 26 ton
used
some conveyor belts available More information on request
used
Max. slider force at the distance of 12,5 mm in the lower dead point: 1250 ton Slider force at the distance of 250 mm in the lower dead point: 350 ton Number of single strokes per minute: 11 Slider stroke: 630 mm Slider adjustment: 630 mm The closed height: 1165 mm Table pillow: -Max. stroke: 250 mm -Stroke adjustment: 250 mm -Max. holding force: 250 ton -Max. ejection force: 40 ton Table dimensions: 4000x1800 mm Bolster dimensions: 3950x1800 mm Table gap: 3750x1300 mm Main motor power: 132 kW Stay spacing: 4000 mm Press weight: 215000 kg
used
Corker BERTOLASO – Natural straight cork • Year: About 1990 • Speed: 2.500 bph • Direction: Clockwise • Single head • Natural straight cork • Safety protections.
used
Manual folding machine made by BERNACKTechnical specifications:Max. Working length: 1000 mmMax. Sheet thickness: 2.0 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools