We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Working width 1000 mm Still in operation: Yes Available: immediately
used
roller cutter, overhauled, working width: 110 cm, roller diameter, 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifting/lifting device, side edge control, dancer roller, load control with control brake, surface needle, Siemes S5 Still in operation: Yes Available: immediately
working width 1000 mm Still in operation: Yes Available: sofort
used
Slitter rewinder, reconditioned, working width, 110 cm, winding diameter: 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifing in and out mechanism, Web guide unit, tension control unit with adjustable brake, overall perforation, Siemens S5 Still in operation: Yes Available: sofort
Qty. 1 Second-hand slitting line Mfc.: Kampf Built: 2001 Re-Installed in 2016 under power – no production! Material Processed: Al. Alloys 1145, 1100, 3003, 7072 and 8111 Temper: 0 Thru H19 Strip Width: 635 - 1753 mm (25" - 69") Thickness: 0.05 - 0.381 mm (0.002" - 0.015") Slitting Width: 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim According to Kampf, this Line will run Can Lid Stock: 0.93 mm (0.037") and "O Temper" Dead Soft Aluminum at 2.06 mm (0.081") with Knife Modifications. Line Speed Max: 800 m/min. (2600 Ft/min.) depending on material type, thickness, etc.
Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD!!
used
Slitter rewinder for foil, paper, foiling and laminates. 7 my -200 my Max. material width = 1250 mm Speed max. mech = 350 m/min, Rewinder max. = 600 mm Min. working width = 25 mm, sleeve 76 mm, Max. working width = 1250 mm, sleeve 76 mm,, Unwinder (shaftless) diameter max. = 1000 mm Sleeve = 70-76/ 150 -152 mm, Cutting system = paper cutting, Side edge control , 16 knives included,
used
Materials: BOPP, PP ,CAST, ALU, LDPE, NYLON, PETP, OPA, Paper, PE, CPP, BOPET Working width 1300 mm Parent Roll Diameter 780 mm Final Roll Diameter 560 mm Maximum mother reel weight 400 kg Finished Roll Weight/Вес готовой бобины (kg) 200 kg Duble Unwinder Unwinder with shaft Rewinder with shaft Number shafts 2 Thickness range (microns) 12-250 Speed (m/min) 500 m/min Brake type With magnet Knife type/Тип ножа (circular, razor, scissor) Razor Slitting Width (mm) 35-130 Unwinder Roll Core Diameter 75 mm Rewinder Roll Core Diameter 75 mm Rewinder Tension (kN) 0-1000 Pressure 6 Bar Control system Voltage 3X380V Frequency 50 HZ Installed Power 55 Kw
new
450 Automatic Die Cut and Turret Rewinder 450mm Rotary Die Cutting unit: -Unwinder with auto web guider -Auto Tension Control system -Pressure meters for die cutting unit -Standard slitting unit with 6sets blades -Standard matrix removing system -Magnetic Powder system,mechanical speed 100meters/min -Max unwinding diameter 700mm, web width 330mm -Standard connection component to 330 turret rewinder 450 Auto Turret rewinder: -Automatic paper core bowl feeder -Automatic tail glue unit -Automatic paper core conveyor -Pressing paper swing arm -Automatic cut unit -Automatic finished roll ejection -Automatic brush press paper unit -Automatic core glue unit -Air expanding shaft 4sets each sizes 1’’, 1.5’’ and 3’’ -Labeling System (optional): Included Features: Speed: 60-100 m/min Max. Rewinding Diameter: 350mm Max. Web Width: 450mm Min. Rewinding W ...
used
Material width max.: 2.500 mm Unwinding-diameter: 1.200 mm Rewinding diameter: 1.050 mm material specification: film from 12 µm, paper + laminates , paper + board 35-250 gr/m2, - exhauster and banana roll - number of slitting / knifes: max 7 reels out / round-knifes - min. slitting width: min 180mm out - max. speed - mechanic/practical: abt. 400 m/min - copy of brochures / drawings - although from feb 1965
Unwinder Web guide rotary die cut Missing label detection to check Waste rewinder Slitting Speed: 120 m/min
used
material-width : max 1.200 mm cores of mother roll 76+152 mm weight of un+rewind-roll 1.000 kg unwinder diameter max. 1.000 mm rewind diameter max 1.000 mm rewind-roll min. width: 150 mm one arm max. 219 mm / two arms up from 220 mm rewind shaft dia. 50 / 70 / 76 mm tension-unwinding : 100 kg tension-rewinding : 20 kg/each arm machine speed : 350 m/min
used
Technical specifications: Max. width 330mm Max. Rewinding speed 200m/min Max. Control speed 250m/min Max Roll weight unwinder 150kg Max. Roll weight rewinder 70kg Max. Diameter unwinder 700mm Max. Diameter rewinder 400mm Max. Paper tension 5-100N Diameter Shaft unwinder 76mm Diameter Shaft rewinder 76mm Configuration: Unwinder Guidline Splice table Stroboscope Settings module machine Controle area (AVT camera not included) Bufferzone Extra webguide Niprol modules Slitting module (razerknives) Web clamp Rewinder (Friction shaft)
used
Slitter /Unwinder Manufacturer: Proslit Model: DUO 1350 SL Year : 2007 Machine Number: 135 SL With Printvision/ apollo II AVT Precision Camera Complete with all available spares and manuals
used
Special offer: Lemu 1050 mm semiautomatic slitter rewinder reel diam on unwind: up to 1100 mm can be shown in operation rewind diam up to 180 mm, if more needed we will check if possible rewinder: cores: cores: 76 mm and 12,7 min width of the reel 15 mm print of the stripe at the end of the reel automatic stop after achieving particular diameter of the reel machine offered subject to unsold Best regards
used
2014 Smag Label Inspection Machine – Slitter Rewinder 350 mm working width Slitting Rewinding Tube Scan digital Inspection Camera Web Guide Label Inspection with or without slitting Manufacturer: SMAG GRAPHIQUE Type: 825 Year of manufacturing: 2014 Web width: 350 mm Mechanical Speed: 120m/min Rewinding Spindles: 25 / 40 / 50 / 76 mm Machine is located in Western Europe Please contact PP Machinery Team for more information or an inspection
used
for sale by owner, special price for quick sale: used Titan duplex slitter rewinder 1200 mm in operation worked with film & paper unwinder diam. 1000 mm, shafts 76 & 152 mm rewinder: double shafts on rewinder: 76 mm film: youtu.be/T949u6BQRLU Special price for quick sale only- we need space Machine offered subject to unsold
used
Special offer: 1000 mm Schiavi used duplex slitter-rewinder very compact machine- it needs very little sapce and can be put next to the wall can be shown in operation FILM: unwinder diam. 1000 mm rewinder double web guide with photocell rewinder: easy removing of the finished rolls thanks to cantilevered rolls Special price for quick sale Machine offered subject to unsold Best regards Joanna Laskowicz Flexo
R23801/12 JAGENBERG Roller cutter Model: Vari Major Built: 1974 Width: 3,800 mm Materials: - coated paper, glossy and matte, grammage from 50 to 250 g/m2. max. speed: 1,500 m/min. for paper 250 g/m2 (The speed depends on the quality and grammage of the paper.) max. unwinding diameter: 2,500 mm max. winding diameter: 1,525 mm min. cutting width: 100 mm Number of upper knives: 6 Winder: 5 Single Winder max. roll width: 1,730 mm min. roll width: 450 mm max. unwinding diameter: 1,525 mm min. unwinding diameter: 300 mm 600 mm max. roll weight: 35 kN Available: immediately
used
<br>Machine completely over-recovered and repainted; Slitter Rewinder with pneumatic unwinding and winding gate, shaft, electrical lateral adjustment, working width 1320 mm, discharged diameter 1300 mm, core diameter 76 mm pneumatic brake Ortlinghaus, new upper and lower knives<br><br>Still in operation: Yes<br>
R23801/12 JAGENBERG slitter rewinder model: Vari Dur age: 1974 Net width : 3.800 mm materials: - coated paper, gloss and matt, grammages from 50 to 250 g/m². max. speed: 1500 m/min. for paper of 250 g/m² (The speed depends on the quality and the grammage of the paper) max. unwinding diameter: 2.500 mm max. winding diameter: 1.525 mm min.cutting width: 100 mm N° of upper blades: 6 Unwinder: 5 singles unwinders max. width of reels: 1.730 mm min. width of reels: 450 mm max. unwinding diameter: 1.525 mm min. unwinding diameter: 300 mm (from 900 to 1700 mm of net width) 600 mm (from 450 to 900 mm of net width) max. weight of reels: 35 kN Available: sofort
<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately
used
<br>Working width: 1320 mm, outside diameter 1300 mm, inner diameter 70-155 mm, shaftless discharge discharge with lifting platform for nut rollers, upwinding with pneumatic extension shaft and mechanical device for finished rolling, lifting core inner diameter 76 mm, machine in production<br><br><br>br>
working width 600 mm Still in operation: Yes Available: sofort