used JUTLAND KRONBORG Fish processing machines

Kronborg KM Mark 5 Fish gutting machine Condition: Overhauled in 2021 The Jutland Kronborg Fish Gutting Machine is designed for gutting fish such as cod, saithe, haddock, whiting and hake on board trawlers as well as in land-based factories. It is also suitable for river types of fish like a carp. The fish is placed continuously in the feeding chamber, there a conveyor belt with catches transports the fish through a positional system of guiding plates to the gutting chamber. The rotating knife cuts the fish as required. After having been cut, the fish passes a rotating nylon brush and water sprays which remove the last entrails. The gutted fish is led to the outlet end for further transportation. Due to the small size and weight, this machine can be used on vessels of the coastal fleet and shore plants. Capacity: 40 fish per minute Size range: 30-75 cm Power consumptio ...

Scanvaegt 4700 Grading and Batching Machine: Used Scanvaegt 4700 Grading and Batching Machine. Photos and Video available. Machine can be seen in operation. Application: sorts food products for size and weight 12 gate sorting sections + 4 automatic gates for batch or boxes Capacity: up to 180 pieces per minute 12 baskets (one side) Left to Right This grader of the CheckBin type is designed for high-precision weight grading. The reliable machine is able to provide intelligent batching to produce batches of accurate pre-set weight for packing on the next stage. Capacity: up to 180 pcs per minute Products: poultry, fish and meat Weighing precision: +/- 1 g Fault percentage: less than 1% of batch weight Max. batch size: 10 liters Construction: stainless steel IP67 Infeed conveyor- Goose neck type: 4300 mm Scale grader Takeaway conveyer Video available,  ...

Baader 200 Filleting machine for salmon species Machine for producing fillet of salmon, trout and the same fish species. It processes gutted and headed fish with or without collar bone. The fish is feed through the tools in such manner that the fillets does not get any stress - it is a prerequisite for a smooth surface of the cut. The salmon version produces both fillets with and without collar bone, and after adaptation, salmon sides on which the rib bones are retained. Capacity: 15-35 fish/min Working range: from 1,5 to 5,5 kg (gutted and headed fish) Power consumption: 5 kW Water consumption: 9 l/min Dimensions: 4,30 x 1,75 x 1,50 m Weight (net/gross): 1800/2230 kg

Filleting machine for small whitefish Condition: good Working range: small witefish from 30 to 55 cm Capacity: 25-40 fish/min Power consumption: 1,5 kW Water consumption: 15 l/min Dimensions: 3,25 x 1,20 x 1,70 m Weight (net): 810 kg

Man. year: 1990 Condition: overhauled The Baader 51 is a skinning machine for fillets cut from white fish, blue whiting, halibut and red fish. This machine seizes the skin without initial cut from the tail end, right where the skin begins. This results in a higher yield. Usable width of feed belt: 380 mm The fillets can be placed on the belt optionally side by side. Capacity: 50-160 fillet/min (depends on the fillet size and operator's skill) Power consumprion: 1,5 kW Water consumption: 15 L/min Dimensions: 1980 x 780 x 1130 mm Weight (net): 530 kg

Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed.

Round-cut heading machine for whitefish Baader IS033 Processes: cod and other whitefish with throat cut Working range: 1-13 kg Throughput rate: up to 30 fish/min Operator: 1 person The fish is placed belly to operator head first into the machine. The fish head is held and the entire fish is transported to the knife section where a high-yield head cut is performed. The main body of the fish, with collarbone on, discharges to the front of the machine. The head is transported via a chute to the rear of the machine. Thanks to its construction, the operator has a clear view of the machine. Adjustments e.g. for adaptations or service operation are performed easily and operator-friendly as well as knife replacement. Technical Data: Water consumption: 10 l/min Power consumption: 2.2 kW Features Maximum yield Easy handling and clean up No size adjustment ne ...

Marel’s Compact Grader is designed to fulfill the needs of smaller operators and larger ones when requiring an excess capacity to handle temporary or seasonal overflows. It consists of an infeed section, dynamic weighing and discharge with optional grading and batching processes for catch-weight and fixed-weight batching. The Compact Grader will handle many poultry products, fresh or frozen: whole grillers, front halves, saddles, butterflies, split breasts, whole legs, thighs, drums, whole wings, breast fillets, leg meat and thigh fillets. Featuring a wide belt and high throughput, it can grade product of up to 3 kilos [6.6 lbs] weight. General information; Throughput: 80 pieces per minute Product weight: 40/3000 gram Product length: 700mm Product width: 250mm with infeed conveyor.

Baader 988 Trimming machine for salmon Condition: Good, working This is the high-speed trimming machine for salmon and trout. Make it possible to reduce manual work and increase quality and speed of cutting belly side, back side and surface of fillets. Due to advanced technology this unit calculates size and volume of every fish fillet before trimming. Average capacity: up to 50 fillets per minute. The optimal size of fish fillets for maximum product throughput and quality (LxW): up to 750 x 250 mm. Data of cutting stored in PC and parameters of trimming could be archived. Equipped with Baader 1517 Filet Transfer Unit.

Baader Filleting machine for whitefish Condition: overhauled Working range: whitefish from 35 to 70 см (=0,4-2,5 kg) Capacity: 27 fish/min Power consumption: 2,2 kW Water consumption: 20-25 l/min Dimensions: 3,80 x 0,95 x 1,60 m Weight (net/gross): 930/1564 kg

Baader 189 Filleting machine for cod and whitefish Condition: overhauled This machine processes cod, pollack, haddoch, hake employing well proved system with high fillet yield. Size range: fish from 40 to 85 cm (or 0,6 - 4,5 kg gutted fish with head) Capacity: 24-34 fish per minute Fish are loaded on to the machine after heading. The filleting tools adjust themselves to the different fish size within the operating range. For skinning the fillets have to be transferred manually to a skinning machine. Power consumption: 3 kW Water consumption: 15 liters per minute Dimensions (LxWxH): approx. 4000 x 1100 x 2400 mm Weight (net/gross): approx. 1060/1650 kg Can be combine with heading machine Baader 427 and skinning machine Bader 51 to compile a complete line.

Heading machine Baader 421 Condition: good Capacity: 28 fish per minute Water consumption: 12 l/min Staff: 1 person Dimensions (LxWxH): 1350x1000x1270 mm Weight: 660 kg

Completely safe in operations. Protected against penetration of water splashes. The motor can be used for a long time. It can be connected to grounded or ungrounded voltage. Protective cover made of several layers of steel and plastic. Waterproof. Dimensions: 250 x 210 x 350 mm. Motor: 0.18 Kw Weight: 10 kg.

Baader 166 Fish Gutting machine Small whitefish heading and gutting machine Condition: perfect This machine operates according to the same procedure as the Baader 162, however, within the range of smaller whitefish from 35 to 70 cm in total length (0,5 to 2 kg). When using both machines at the same time, total catches can be processed after rough grading since the working ranges of both machines overlap generously. Capacity: 25, 35 or 40 fish/min Power consumption: 2 kW Water consumption: 25 L/min Dimensions: 1,40 x 1,20 x 1,80 m Weight (net/gross): 650/920 kg The Baader 166 can be combined with the Baader 184

Baader 185 Filleting machine for whitefish Baader 185 provides filleting and skinning of a whitefish: big and medium cod, haddock, saith, merluza or the same fish. This machine is similar to the Baader 184. Its guidance assemblies and tools are, however, larger dimensioned. The working range of this machine is abt. 50 to 100 cm (=1 - 8,5 kg) for cod , abt. 50 to 90 cm (=1 - 6 kg) for saithe and abt. 50 to 80 cm (=1 -4,5 kg) for haddock, cm meaning the total length of the fish and gutted fish head on. Also can process de-headed fish: cod 40-80 cm (0.8-6.5 kg), saith 40-75 cm (0.8-5.0 kg) and haddok 40-65 cm (0.8-3.5 kg). Also with an integrated skinning unit the Baader 185 is highly efficient with optimal product quality and high yield. Completed with skinner Baader 51. Capacity: 24-32 fish/min Staff: 1 person Power consumption: 10 kW Water consumption: 28 l/min ...

Marel Dual lane grader for 12 gates Manufactured year: 2011 Condition: Good, working Grader for raw material (fish, chicken, poultry and meat). Used to work at fish land-based factory. Equipped with baskets and high-precision dynamic weighing unit. Grader is able to sort production into 8 groups on a one side and 4 on another side. Equipped with quality control station A, B, C.

PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW

Baader 184 Filleting machine for whitefish Filleting machine for whitefish Condition: Overhauled This machine is designed for filleting gutted and headed cod, saithe, haddock from 30 to 70 cm in total length (=0,3 - 2,5 kg, h&g) or depending upon the type of fish, also less than 70 cm. Time-tested Baader filleting system with high yield and operational reliability. The Baader 184 is equipped with an integrated skinning unit. Capacity: 24-40 fish/min Power consumption: 10 kW Water consumption: 25 l/min Dimensions: 6,15 x 1,70 x 1,50 m Weight (net/gross): 2550/2850 kg

Fish Slaughter and Cleaning Machine

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

CEPHALOPOD CUTTER WITH POSITIONING BAND, MECALSA TYPE: MC CTDP/CH200 Technical description: Material: Stainless steel Voltage: 380/440 V Frequency: 50/60 Hz Cutting pitch between blades: 40 mm

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

GUTTING MACHINE FOR HERRING, BALTIC HERRING, SARDINES, MACKEREL AND WHITEFISH ARENCO MODEL: CIS Technical description: Power supply: 380-440 V ? 50-60Hz Conveyor width: 260 mm Dimensions: 3600 x 900 x 1330 mm