used JAMES BURN Hole Punches

Demo machine Semi-automatic Equipped with 5 tools : - 2:1 1" - 3:1 3/8" New Style - 3:1 1/2" New Style - 5/16" - 2/1 3/4" Binding length : 3:1 : max 60 – min 4 2:1 : max 41 - min 4 Book thickness : 3 mm to 22 mm Output : 600/1200 per hour

serial no.: 1800 Dimensions (L/W/H): 70x70x120 cm Wire-O-System (closer only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Model: Value, Automatic Punching Machine, Standard Tools, Belt Delivery

james burn ex610 - 2:1 square 2:1 round 3:1 square 3:1 hanger punch 4:1 ellipse and separator bracket patterns available james burn epx700 james burn bb43h - 1/4_5/16_3/8_7/16_1/2_9/16_5/8_3/4_7/8_1_ 1/4 hanger 3/8 hanger they have jaws james burn cd610 - 1/4 It can be worn normally and with suspension up to 60 cm.

Machine is in good working condition. Punch has been expertly maintained. Rod ends, belts, bearing replaced as necessary to keep machine running tight. Auto Feeder, Punching Unit, vibro table Delivery, 3:1 & 2:1 Punch Max size 380x380 mm 3:1 square 4x4mm perforating tool 2:1 round 6mm perforating tool

1 JAMES HEAL Elmatear tear tester for accurately testing textiles, nonwovens, and a wide variety of similar materials, including paper, board, and plastic

WIRO closing machine BURN Verfügbar: immediately

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Interchangeable jaws: without -Taper cone: Ø 105 mm -Hole circle: Ø 135 mm -Weight: 25 kg

Maximum punching force: 650 kN More performance data see nameplate or on request Inclusive range of punches and matrices

Specifications: - Pressure capacity 1000 KN - Stroke infinitely adjustable 10 - 100 mm - Stroke rate 34 - 80 1/min - Projection approx. 510 mm - Installation height approx. 450 mm - Drive 400 V / 15 kW - punches e.B. up to 31 mm Ø in steel 25 mm - with special punch saddle z.B. up to 58 mm Ø in steel 13 mm - e.B. up to 90 mm Ø in steel 8.5 mm - Space requirement approx. W 1200 x H 2400 x D 2300 mm - Weight approx. 3600 kg - with: - Hydr. Low Pressure Grain Detection Device - various punches + matrices - Emergency stop button

Specifications: - Pressure capacity 450 KN - perforates e.B. up to 25 mm Ø in steel 15 mm - Stroke infinitely adjustable 0 to 60 mm - Stroke rate approx. 16 to 47 1/min - Projection 760 mm - Installation height 215 mm - Working height 1150 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 850 x H 1850 x D 1650 mm - Weight approx. 1350 kg - with: - E. foot switch - 20 pieces of various punches + dies

TRUMPF TRUMATIC 600L Work area: 3000 x 1600 mm. Hours: 29.000

Offer here a post Cewe stand units partly still packed in all paper and unused partly already used or not quite complete anymore the tools have not been used for a bit longer but still in the functional state retail sale possible

Paneling Finn-Power Bending Automation Mod. Bending Cell Type BC 2550 200 year 1999 Hours: 27.800 This machine is in good condition and worked for few hours. I point out to you that there is an oil leak wich comes from a cylinder. The machine is functioning and in case of your visit, it can be connected again.

Specifications: - Printing capacity 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - punches in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

offer 22273 Specifications: - Stroke 30 mm - Air consumption per stroke 5 l - Pneumatic connection 8 bar - Space requirement approx. W 500 x H 550 x D 500 mm - Weight approx. 70 kg - with: - Foot switch - Machine base mobile W 600 x H 830 mm - Various tools HUECK

Punching force: 1000 kN Weight: 2400 kg For example, punches a 40 mm hole in 20 mm steel Stroke release via foot switch Includes viewfinder for graining and setup Assortment of tools is included in the price

MUBEA BFL 350 - Profile steel shears technical data see pictures Dimension: LxWxH 1.1x0.7x1.8 meters Coizilgunw Weight 1100Kg

offer 20366 Specifications: - Printing capacity 100 t - Stroke infinitely adjustable 10 - 100 mm - stroke rate 34 - 80 1/min - Projection 510 mm - Installation height 500 mm - Drive 380 V / 15 kW - punches e.g. up to 31 mm Ø in steel 25 mm - with special punching caliper e.g. up to 58 mm Ø in steel 13 mm - e.g. up to 90 mm Ø in steel 8.5 mm - Space requirement approx. W 1200 x H 2550 x D 2100 mm - Weight approx. 3700 kg - No tools or punching saddles available

Offer 23035 Technical data approx.: - Pressure capacity 30 t. - max. sheet thickness 10 mm - max. punching diameter 105 mm - Punching performance - e.g. Sheet steel : 105 mm in 1.5 mm ; 45 mm in 5 mm - e.g. VA sheet metal : 90 mm in 1.5 mm ; 45 mm in 4 mm - Stroke 7 - 70 mm - Projection 560 mm - Maximum stroke rate 120 h/min - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - with: - Notice table with stops - Foot switch; - Emergency stop button - Punch quick-change device - various receptacles, punches and matrices

Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke release via foot switch Assortment of tools is included in the price

Offer 23293 Specifications: - Printing capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - Infinitely adjustable stroke 0 to 28 mm - Stroke rate 26 to 36 1/min - Projection 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - Weight approx. 1300 kg - With: - Foot switch - Grain detection device, - Support table with foldable stops W 1100 x D 850mm - Sliding paths of the stops from the center of the punch - Width between Li and Re approx. 470 mm x D 510 mm

Punching force: 350 kN For example, punches a 23 mm hole in 12 mm steel Stroke release via foot switch Assortment of tools is included in the price

Key data: 55 t

Specifications Model No.: PM-55T Serial No.: 94713 Punching pressure max: 55 tons Punching capacity max.: Ø 22 x 18 mm Diameter x thickness: Ø 50 x 8 mm Engine power (kW): 3.7 Working height: 1050 mm Projection: 310 mm Table size (LxW): 700 x 500 mm Weight: 1620 kg Year of manufacture: 9/1999 Country of origin:Taiwan

Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Stroke release via foot switch Assortment of tools is included in the price