used JOTES Surface Grinding Machines

JOTES SPD 30B surface grinding machine of Polish production is a manufacturing machine with horizontal spindle axis that performs grinding on the periphery of the grinding wheel. The workpiece of maximum length 1000 mm and width 300 mm is mounted on a rectangular electromagnetic table or directly on the grinding machine table. The work table moves on the base guideways and the change of its direction of movement can be performed automatically by bumpers or manually by adjusting a suitable lever. The hydraulic drive of the machine’s work table allows continuous adjustment of the speed in the range from 2 to 30 m/min. The installed grinding wheels, with a diameter of 350 mm and a width of 63 mm, are driven by an electric motor mounted directly on the grinding wheel spindle. The grinding wheels are moving at a peripheral speed of 26 m/s. The total weight of the magnetic surface grin ...

JOTES SPG 30x80 Surface grinding machine Max. length of grinding 800 mm Max. width of grinding 300 mm Max. workpiece height 400 mm Table 800x300 mm Work piece weight 200 Kg Grinding wheel size 250x40x6 mm Spindle speeds 1470 Rpm Main motor power 7,5 kW Machine weight 3100 kg Machine dimensions 3000x2285x1980 mm

The grinder has a set of technical documentation. The photos show the actual condition of the machine. The grinder is fully functional.

Internal Grinding Machine JOTES SOJ 10 Internal diameter100 mm Grinding depth 160 mm Swing diameter 300/450 mm Max. outer diameter 300/450 mm Weight of the machine ca.:2900 kg Almost unused.

JOTES SOH-10 internal grinding machine was built in Poland. The SOH10 grinding machine is used in the finishing process to give the right shape and surface roughness to holes with a diameter from 10 to 100 mm and conical holes with a maximum apex angle of 30°. The high-performance spindle machines workpieces with a maximum diameter of 300 mm (with guard) or 450 mm (without guard). The total weight of the machine is 2900 kg. Technical parameters of the JOTES SOH-10 internal grinding machine - minimum hole diameter: 10 mm - maximum hole diameter: 100 mm - maximum hole length: 160 mm - maximum diameter of grinded workpiece (with guard): 300 mm - maximum diameter of grinded workpiece (without guard): 450 mm - spindle rotation speed: 70-700 rpm - manual spindle feed (1 wheel revolution): 2,5 mm - largest spindle turning angle: 15° - lateral manual feed of spindle (forward): 50 m ...

power supply 3x400 V, 50Hz Power: 7 kW Weight: 2,800 kg Installation dimensions: 2,400 x 2,000 x 1,700 mm Max grinding diameter: 75 mm Min grinding diameter: 5 mm

internal diameter:100 mm grinding depth:160 mm swing diameter:300/450 mm centre height:290 mm max. outer diameter:300/450 mm work piece spindle speed:50-360/90-700 U/min weight of the machine ca.:2900 kg Machine size (LxWxH):2500x1750x1800 mm face grinding attachement:mit Schleifscheibe internal grinding spindle:DKF Typ SLA 60x400 mit 20.000 U/min grinding wheel dresser:auf Tisch 3 jaw chuck Ø:200 mm coolant system with magnet grate:und Wassertank frequency converter:f. stufenlose Spindeldrehzahl f. Innenschleifeinrichtung 100 % before loading warranty: none one used internal grinding machine, make: Jotes, type: SOJ 10M, year of produktion 1986

Maximum diameter of external grinding; 250 mm Maximum diameter for grinding holes; 200 mm Maximum length of external grinding: 800 mm Maximum hole grinding length; 150 mm the rise of the canines; 135 mm Maximum workpiece diameter in eyepiece: 80 mm The maximum turn of the table; +/- 8 degrees, head rotation +/- 1 degree Tailstock taper; no 3 The smallest diameter of the ground hole; 20 mm Main engine; 7 KW Dimensions; 2800/1700/1700 mm Mass; 3,800 kg

Maximum diameter of external grinding; 250 mm Maximum diameter for grinding holes; 200 mm Maximum length of external grinding: 800 mm Maximum hole grinding length; 150 mm the rise of the canines; 135 mm Maximum workpiece diameter in eyepiece: 80 mm The maximum turn of the table; +/- 8 degrees, head rotation +/- 1 degree Tailstock taper; no 3 The smallest diameter of the ground hole; 20 mm Main engine; 7 KW Dimensions; 2800/1700/1700 mm Mass; 3,800 kg

Maximum diameter of external grinding; 250 mm Maximum diameter for grinding holes; 200 mm Maximum length of external grinding: 800 mm Maximum hole grinding length; 150 mm the rise of the canines; 135 mm Maximum workpiece diameter in eyepiece: 80 mm The maximum turn of the table; +/- 8 degrees, head rotation +/- 1 degree Tailstock taper; no 3 The smallest diameter of the ground hole; 20 mm Main engine; 7 KW Dimensions; 2800/1700/1700 mm Mass; 3,800 kg

Surface reference plates, roughness measures, 8 pieces MASSI surface grinding TGL 0-4763, DIN4763 Rz = 0.63 μm, Rz = 1.6 μm, Rz = 3.2 μm Drehen TGL 0-4763, DIN4763 Rz = 1.6 μm, Rz = 3.2 μm, Rz = 6.3 μm, Rz = 10 μm, Rz = 20 μm im Holzkasten used, tested ! Dimensions: 225 x 120 x 40 mm

Description the grey cast iron machine frame convinces with stability and torsion alimness, precise guides and excellent workmanship all guideways are reliably supplied with lubricant by an automatic central lubrication the working area is protected by an easily accessible enclosure the high-performance coolant pump is combined with the suction unit and binds the resulting grinding dust and aerosol during processing Grinding spindle the grinding spindle is large in size, dynamically balanced, completely sealed and permanently lubricated Prestressed precision bearings enable maximum grinding performance and reliability for many production hours Programming the high-quality ball-circuit spindle and the powerful servo motor guarantee precision and repeatability of positioning in the Y-axis for set-up work and for the manual process of the grinding spindle, th ...

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

Back grinder for JUNG surface grinding machines, etc. Operating voltage: 24 volts. Magnetic plate: 110 x 75 mm. Angle adjustment: 0 - 2 degrees. Dimensions: 500 x 200 x 125 mm high. In original JUNG wooden cassette, Tools and operating instructions. Weight: approx. 25 kg. Shipping with DHL possible in consultation. Visually, good little used condition. The device can be visited in consultation and is immediately available. Please also note my other entries.

CNC flat and profile grinding machine Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7,100 kg

General: Year of construction 2019 Spindle speed 1,450 rpm Travel speed table 5 – 25 m/min Largest grinding wheel 355 x 38 x 127 mm Distance spindle – table max. 500 mm Clamping surface 300 x 600 mm Automatic feed control AD5

General: Year of construction 2019 Spindle speed 1,450 rpm Clamping surface 300 x 600 mm Largest grinding wheel 355 x 38 x 127 mm Travel speed table 5 – 25 m/min Distance between spindle and table 500 mm Weight 1.700 kg Other equipment and accessories included: Automatic feed control AD5 Coolant device Hydraulic

CNC flat and profile grinding machine, horizontal grinding spindle LSCH-220 Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7.100 kg

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

Grinding surface 600 mm x 250 mm Table surface 600 mm x 200 mm Distance between the table surface and the grinding spindle max. 550 mm Max. table load 200 kg Grinding spindle speed at 50 Hz 2,800 rpm Drive power of the grinding wheel 2.2 kW

- Grinding width: 200 mm - Magnetic table: 500 x 200 mm - Dressing device: yes - Coolant device: yes - Automatic infeed: no - Machine weight: 1850 kg - Dimensions (W x D x H): 1.8 x 1.5 x 2.2 m m - Condition: good, immediately ready for use Accessories without documentation, machine feet

GENERAL Project No.: 905610 Quantity: 1 pcs. Manufacturer: MÄGERLE Type: MGC Grinding Centre Control: Siemens 840 D solutionline Year of construction: 2020 Conservation status: Used machine Machine on approx. (hrs): 2.124 Program run approx. (hours): 155 Spindle on approx. (hrs): 214 DESCRIPTION GRINDING Travel in X 1300 mm Travel in Y 450 mm Travel in Z 350 mm Max. rapid traverse speed in X/Y/Z 20/10/10 m/min Max. distance table spindle center 850 mm Automatic balancing device Motor spindle Max. diameter x width x bore grinding wheel 500x160x203.2 mm Max. circumferential speed 63 m/s2 Max. speed 5000 1/min Max. power at ED 10-40/100% 50 kW Workpiece table with T-slots and 16-fold oil feed-through (shuttle table) 2x 760×325 mm Clamping hydraulics Hydrostatic guidance Forming roll dresser MT 200 D200 B167 OTHER EQUIPMENT Splash guard cladding wit ...

Gebr. Carousel multi-station grinding machine

For sale is: 1 piece used CNC surface grinding machine Manufacturer: Jung Type: 740C Year: 1996 Siemens 840 controller Electromagnet 700 x 400mm Complete metal powder filter and conveyor system Machine weight: 6.000Kg For more technical data, see pictures. Complete documentation, some new grinding wheels included Videos can be sent on request. The machine can be viewed in our warehouse in 09599 Freiberg.