We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
MAKE:ISHIKAWAJIMA - HARIMA TYPE:HLS MACH. NO.:HLS 6690 / 6691/ 6685 DATE:Jan-77 RATED TORQUE:2300 K.G.M. 16636 LBS-FT
used
MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKA MACH.NO.:HKA 7942 DATE:Jan-77 RATED TORQUE:1500 K.G.M. 10850 LBS-FT
used
MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKS MACH. NO.:HKS 6776 DATE:Dec-75 RATED TORQUE:1500 K.G.M. 10850 LBS-FT
used
ISM Shibaura N843L, 3-cylinder water-cooled diesel engine, displacement 1,662 cc, power 26.1 kw/35 hp/2,700 1/min., functional. We supply diesel engines 1-6 Zyl., various products: Deutz, Daedong, Hatz, Hinomoto, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Performance of 4.5 to 100 kw, used, partly new. Gasoline engines: 1-2 cylinders of 3-15 kw from B & S, Honda, Kohler, Robin, Wisconsin. Various coolers, starters, light machines and silencers in stock, hydraulic pumps and hydraulic motors. Jodau Kommunal-, Umwelt- & Grünpflegetechnik Inh. Joachim Dau 24941 Flensburg, Wieselhof 29
used
Sale of parts and assemblies ex large area mower Shibaura CM 364: Diesel engine 25 kw / hydrostatic transmission / axles / electric / cabin / wheels and more. no mower-deck.
used
Parts made of compact tractor Shibaura SP 1840 (manual gearbox) with engine damage, e.B. cabin, rear axle gearbox, four-wheel drive front axle, three-point gear, steering, electrical parts, fairings, mask, wheels, front PTO gearbox, front lift, defective engine (cylinder head damage) etc.
used
TOSHIBA SHIBAURA CNC VERTICAL BORING MILL with FANUC 16i-T CNC Control Control: GE Fanuc Series 16i-T Table Diameter: 117.7” (3000mm) Maximum Swing: 141.7” (3600mm) Maximum Weight on Table: 50T (2) Ram Heads L & R Z-Stroke: 48 – 375” Maximum Distance Under Rail: 126.7”(3220mm) Maximum Height under Ram: 119.2”(3030mm) Cross Rail Travel: 79.9” Vertical Ram Stroke Right: 62.9”(1600mm) Vertical Ram Stroke Left: 49.2”(1250mm) Speeds: .32 – 63 RPM Approx. Weight: 125,222 lbs Equipped With 3000mm dia. Table / GE Fanuc 16i-T CNC Control / (2) Ram Heads
used
core boring: 70-560 mm bore depth: 20000 mm drilling diameter: 70-500 mm core boring capacity in St 60 - reboring: special: 560-1000 mm workpiece diameter: 3200 mm workpiece weight: 200 t faceplate diameter: 2900 mm speed of boring spindle:: 100 - 500 U/min feed range: 3 - 2000 mm/min boring spindle drive: 55 kW spindle head drive: 150 kW workpiece turning speeds: 230 U/min control: Fanuc total power requirement: - kW weight of the machine ca.: - t 2010 Retrofitted equipped with: - Fanuc Control - 4-Jaw Chuck - Oil Pressure Head - Boring Head - Drill Head - 2-Point Rollers Steady Rest (4) - 3 Point Steady Rest (2) - Bar Rest (2) - Coolant & Coolant Piping - Chip Conveyor - Honing Oil Tank & Honing Tool Bars The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 1600 t stroke: 300 mm dayligth: - mm ram adjustment: 8 mm table-size: 1500 x 1200 mm ram surface: 1320 x 1180 mm ram strokes: 75 Hub/min Shut Height: 800 mm main drive: 132 kW total power requirement: - kW dimensions of the machine ca.: - m total wight: - t Slide Knockout - 1st stage: 5 ton - 2, 3, 4 stage:15 ton each - Knockout Stroke: 40 mm Bottom Knockout - 1st & 4th stage: 5 ton - 2nd & 3rd stage: 20 ton - Stroke: 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 2500 t stroke: 360 mm dayligth: - mm ram adjustment: 8 mm table-size: 1500 x 1400 mm ram surface: 1400 x 1400 mm ram strokes: 70 Hub/min Shut Height: 1000 mm main drive: 190 kW total power requirement: - kW dimensions of the machine ca.: - m total wight: - t 2500 ton Sumitomo hot forging press together with a 150 ton Komatsu OBS press - Model: OBS-150 - Capacity: 150 ton - Stroke: 200 mm - SPM: 256 - 50 - Slide Plate: 700 x 650 mm - Bed: 1250 x 780 mm - Die Height: 420 mm - Adjust: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Shibaura, coolant pump: from milling machine Matsuura MC 710V -Type: OPSI-180W -Power: 180 W -Delivery rate: 39/53 l / min -Hole circle: Ø 160 x 10 mm -Dimensions: 200/270 / H370 mm -Weight: 13.3 kg
used
This machine is a numerically controlled and cross rail elevating double column type vertical boring and turning mill. Is a machine with two rail heads. One, on the right side is turning head and the other, on the left side is a milling head. The right head is utilized exclusively for turning work and can withstand heavy duty operation, and left performs boring and milling work. After the turning is completed, both heads can be performed without changing the machine set-up. These features, coupled with table indexing and milling feed, assure versatility machining capabilities. The cross rail is guided by the slideways of the two columns. Electro-hydraulic clamping clamping devices assure clamping of the cross rail at the desired position. Highly accurate horizontal straightness is guaranteed by the simple and stabilized method of utilizing the compensation beam inside the cross beam. ...
used
Description: Tractor: SHIBAURA SD2243 Drive: 4-wheel drive (4x4) Gears: 16 (4x4) Power: 22 HP Condition: Unused Fuel: Diesel Cylinders: 3 Approx. Onsite Dimension. (l x w x h): 2,500 x 1,260 x 1,380 mm, Vehicle identification number: 10,476, weight approx.: 1,200 kg
used
AT-Motoren alle sofort ab Lager lieferbar mit Garantie info@miw-zeven.de
used
CAT C13 overhault engine bloc (RECON) CAT C13 overhault crankshaft (RECON) CAT C13 overhault connecting rods (RECON)
Diesel engine industry interest as a complete gene set very good condition over BRA on rapeseed oil 6900 with Leroy Somer generator for sale. If intrested the genset as a complete CHP incl. heat exchangers can be ordered all components year 2009 CHP manufacturer was the company Würz energy GmbH
new
We offer from stock Zeven-Germany: Refurbished replacement engine Lombardini LDW1404,full version. Engine is without intake manifolds, starters, Lima, oil pan. 12 months warranty MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Phone: 0049 (0) 4281-950583 Fax : 0049 (0) 4281-950585 E-Mail: info@miw-zeven.de abc..miw-zeven.de
We sell a reconditioned Scania DC 16 43 A (industrial engine). Before overhaul, the engine had 6600 hours.
Scania diesel engine for generator drive, DC13-073A; Variable continuous power (PRP) 326 kW at 1500 1/min. (New)! Retail price: 19.000,00
new
General overhault Exchange engine DEUTZ/Lombardini F4M1008F/LDW1404 without starter, alternator, incl. Fuel-injection-system MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 info@miw-zeven.de MIW-Zeven
used
The Jabsco 15780-0000 is a Cummins bronze Flexible Impeller engine cooling pump with a Flanged Ports, bare shafted pump only. This is a Marine diesel engine cooling pump for Cummins engine models K38 / K50 / KTA38 / KTA50. It is the same pump as Cummins engine part 3393018 / 4314820 / 4314522. Features : Pump Body:Bronze Port Size:Ports are Flanged Product Specs : Flow up to 400 GPM. Constructed from marine quality bronze and stainless steel. Easy to service and maintain. Excellent self-priming even from dry start-up. Unaffected by small solid contaminants. Engineered to high standards. High-grade design delivers extended lifespan.
used
MARINE DIESEL ENGINE Reference number 20131 Brand MITSUBISHI Model S12A(N) - MPTK Power 910 HP RPM 1550 RPM Serial number 11245 General condition Running Taken Out Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor MECHANICAL CONTROL Turbo YES Aspiration Turbocharged / Jacket Water Aftercooled Cooling system 12-cylinder, 4-cycle, water cooled diesel engine, with direct-injection, turbocharger, air-cooler, built-up heat exchanger and sea water pump Starter Electrical Start (24V) Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Expansion tank YES Heat exchanger YES DIMENSIONS LxWxH (cm) 2439mm*1482mm*1596mm Weight (kg) Net Weight 5000 kg
used
MAN D 2066 LF 12 - Euro 4-287 KW - 390 HP Motor was cpl. repaired according to RAL GZ-797: with new piston rings, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Old Engine must be returned
used
Motor was sealed front and rear new - upgraded oil pump, thermostat, oil filter, fuel - engine was installed on engine test bench and a cpl. Test run was carried out 6 months warranty on the motor mechanism Mileage only 200,000 km old part pledge 4,500.00 = €
used
1 cylinder head naked, 453 AK, overhauled