We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Machine Details Warehouse number 1105-03632 Machine type CNC turning and milling center Make INDEX Type G 200 Year of construction 1997 Control type CNC Controller C200- Siemens 840 C Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from location Technical details Turning diameter 200 mm Turning length 400 mm Controller C200- Siemens 840 C Circulation diameter 420 mm Rod diameter 65 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - Spindle motor 100% ED= 7.5/13/20 kW Drive power - Spindle motor 40% ED= 13.3/22/29 kW Rod diameter 65 mm Spindle bearing diameter 100 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - spindle motor 100% ED= 7.5/13 kW Drive power - Spindle motor 40% ED= 13.3/22 kW C - axis 0.001 ° Number of revolvers 2. Turret head (x-fold) 2 x 14 pos Travel - x ...
used
Index GFG 450, Built in 1996, Control Index C 200 - 4, Travel X/Z 430/545 mm, Circulation Ø over bed carriage max. 425 mm, Bar passage 100 mm, 2 revolvers 8-speed / 6-speed, turret 1 powered tools, Recording VDI 50 , C axis 0.001°, Conveyor 4-stage transmission up to 2,250 rpm, Three-jaw chuck 315-82, Full-clamping cylinder OVS 150, Accessories
used
Control: Fanuc 32i Rotary memeser 380 mm Main spindle D=65mm Speed 4000 rpm Holding brake C-axis Tool carrier 1 X/ Z axis 220/ 600 mm working distance Tool carrier 1: 14 shots (VDI 30)/ 7 attached Tools Tool carrier 2 X/Z axis 110/650 mm working distance Tool carrier 2: 7 shots (VDI 30) + 3 UniFlex -52 Tool measurement ATC Chip-federals
used
Controls: Siemens C200-4 D, has been regularly serviced, with documentation and accessories, the machine can be inspected on site.
used
Used multi-spindle machine INDEX MS36E built in 1996 including a lot of accessories (collets, synchronizer guns, interchangeable wheels, various working curves, etc.) The plant is virtually ready for dispatch, in a dismantled state for inspection. For photos, technical data and a list of accessories, see Appendices. It has no major defects, is basically ready for operation, only the rubber hoses should be changed before commissioning and the coolant-lubricant system should be thoroughly cleaned and rinsed throughout. Accessory listing MS36E Iemca Loading Magazine Oil filter system (+3 rolls of filter paper) Collets Synchronizer Clamps (sentences) Ø 24 Ø 16 Ø 26 Ø 20 Ø 27 2x Ø 23 Ø 28 2x Ø 26 Ø 30,5 2x Ø 27,5 Ø 31 Ø 32 div. jaws Ø 33 for 3-jaw chuck Ø 34 Ø 36 SW 24 1x spindle stop (currently layer 4) 3 sets of rod guide tubes Various reductions f ...
used
work travel: X:320 & Z:1250 mm rapid traverse: X:20 & Z:40 m/min control: INDEX - C200-4D --- MOTOR MILLING SPINDLE ---: ------------------------- tool taper: HSK A63 turning speeds: 12000 U/min Power: 27,5 KW front bearing: 80 mm turning speeds: 3000 U/min MAIN SPINDLE D102 direct drive: ------------------------- spindle diameter in front bearing: 1200 mm spindle passage: 102 mm forward bearing diameter: 170 mm CNC Turning- and Milling Center | INDEX - G400 S-1/300 The machine is in a very good condition with only 2500 H main working hours. + MARPOSS probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G400 | G 400 | G400 S1 300 | G400S1 300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning diameter 620 mm turning length 1500 mm control Siemens 808D spindle bore 100 mm turning diameter over slide 420 mm spindle turning speed range 10 - 4000 U/min main drive 41 kW rapid traverse speed 10000 mm/min total power requirement 65 kW weight of the machine ca. 9 t dimensions of the machine ca. 6,4 x 3,0 x 2,5 m Control unit CNC Siemens 808D new Drives/Servomotores, 24 month warranty on equipment - Chip Conveyor - Tool cooling system - Tailstock - Tool changer (Tower) with 8 positions OPTIONAL INCLUDED - - piece support (Lunete) The machine is completely upgraded
used
- Control: Sinumerik (Index C200-4D) - Rod passage 65 mm - Speed 5000 1/min - Turret 1 with 8 stations (all driven), incl. synchronous spindle - Turret 2 with 6 stations (all driven) - Revolver 1/2 travel: X1= 90, Z1= 290 mm X2= 81, Z2= 80 mm - Back processing 5 Rear Drilling Stations - C axis -Conveyor Machine weight approx. 3000 kg Footprint including control cabinet and chip conveyor: LxWxH: 3430 x 1240 x 1750 mm Loading magazine: INDEX MBL Weight: approx. 2,000 kg Dimensions LxWxH: 4500x1100x1500 mm
used
FANUC Control 32iB max. swivel Ø 380 mm max. turning length 600 mm Spindle passage 65 mm Chuck diameter 250 mm Spindle speed 4,000 rpm REVOLVER 1 Travel: X= 220 (+60/+280), Y= 150 (+/- 75), Z= 600 mm Stations 14, powered 7 Speed driven stations 6,000 1/min MULTIFUNTIONsREVOLVER Travel X= 110 (+85/-25), Z= 650 mm Stations 10, including 7 fixed places (VDI 30) 3x UniFlex superimposed tools Tailstock Handling system FMB unirobot M-10iA-12-7P, year 2017
used
Curve lathe INDEX B60 - not complete - as spare part dispenser - see pictures
used
Curve lathe INDEX ER60 - see pictures More: turnover machine MANURHIN Traminer TR22B
used
Bendless automatic lathe make INDEX type E 60Fabr. -No: E 6072107 Year 1972largest material passage: 60 mmChuck diameter: 136 mmmax. thread diameter: M 30 / M 24Speed range: 134 - 2420 rpm.Working distance: 80 mmRapid traverse path: 50/62 mmlargest longitudinal path: 80 mmDistance quill to collet: 60 - 230 mmFeed infinitely variable: 5 - 3400 mm / minDrive power: 5.5 kWDimensions L x W x H: 1510 x 850 x 1500 mmWeight approx. 2000 kgWith- bar feed- various change wheels- hydr. Power Chucks- long turning device- Copy machine Fabr. SauterusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Single spindle lathe make INDEX type ER 25Mash. -No: 25751408max. workpiece passage Drm.:25 mmxa0xa0xa06-edge: 21 mmxa0xa0xa0Square: 16 mmmax. workpiece feed p. Circuit: 70 mmmax. thread diameter: M 16 / M 14Speed range: 14 - 5750 rpm.Number of automatically switchable speeds: 4Number of overdrive speeds: 26Number of slow speeds: 234Turret diameter: 120 mmTool holder cone: 3/4 Turret processing: 60 mmDistance collet - Turret: 60 - 150 mmFeed rate infinitely variable: 16 - 2800 mmFeed rate continuously variable: 40 - 7000 mm / minRapid forward / backward: 10/25 m / minSwitching time: 0.75 sCross slide travel: 44 mmLongitudinal adjustment of the upper slide: 20 mmContinuous feed of the cross slide: 5 - 1000 mm / minDriving power: 4 kWDimensions L x W x H: 1900 x 1020 x 1650 mmWeight approx: 1650 kgWith- 8-fold revolver- 2 vertical parting carriages- 2 horizontal cut-off slidesused, in very ...
used
Inv. Num. : 6160 Type: GE 42 NC Producer: INDEX Generated: Parameters: Control system: Siemens Maximum turning length: 360 mm turning diameter: 300 mm Minimum spindle speed: 31.5 1/min Maximum spindle speed: 6000 1/min Total power requirement: 35 kW Equipment: Bar loader
used
Index G200 bar lathe :::SPECIFICATIONS::: CNC Model: Siemens CNC version: Index C 200 - 4 Main spindle nose: ASA 6 Main spindle bar clearance: 60mm Turning diameter: 150mm Turning length: 400mm Main spindle revolutions: 5000 Number of Tool Turrets: 1 Number of tool places before turret: 14 Number of motorized first turret: 14 First turret tool attachment type: VDI 25 X axis travel first turret: 155mm Y axis travel first turret: +-60mm Z axis travel first turret: 400mm Model and brand bar magazine: LNS Hydrobar L 3000 mm Tailstock: yes Positioning: automatic Chip evacuator: carpet Other technical data: The tailstock has a programmable axis Machine equipment: Rich equipment: Motorized and fixed tool holder sets Hainbuch pliers Self-centering forkardt :::D IMENSIONS AND WEIGHT::: Weight: 4800Kg
used
Automatic ring lathe from Keul - Rotary Ø: 1.0 - 8.0 mm - Gripping and swivel device - Part discharge position 1 - Machining unit position 1 - Roll straightening unit -Conveyor - Reel Ø 1200 mm, 1,000 kg
used
Type tandem with 2 workrooms Control: SIEMENS Sinumerik max. turning Ø: 200 mm Travels: X= 520, Z= 200 mm Revolver with 14 stations Conveyor
used
turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools
used
turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools
used
turning diameter: 200 mm turning length: 400 mm control: SIEMENS SINUMERIC 840 C total power requirement: 40 kW weight of the machine ca.: 6.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer Index Model G 200 Year of manufacture 1999 Good condition
used
Manufacturer Index Model G 200 Year of manufacture 1999 Good condition
used
Manufacturer Index Model G 200 Year of manufacture 1999 Good condition
used
turning diameter: 250 mm turning length: 400 mm control: C 200 / 8 total power requirement: 60 kW weight of the machine ca.: 8,5 t Swing Ø above bed, max. 300 mm Max. turning Ø for chucking work, approx. 250 mm Travel of Slides: Turret 1, X / Z travel 163 / 550 mm Turret 2, X / Z / Y travel 140 / 250 / 260 mm Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5,000 rpm Feed range 0 - 15,000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories / Special Features * SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. * Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. * Spindle indexing ...
used
Including chip conveyor.